LG FLATRON 995FT Plus Bedienungsanleitung

Introduction

Thank you for purchasing a high resolution monitor. It will give you high

resolution performance and convenient reliable operation in a variety of

video operating modes.

Features

The monitor is a 19 inches (18.0 inches viewable ) intelligent, microprocessor

based monitor compatible with most analog RGB (Red, Green, Blue) display

standards, including IBM PC®, PS/2®, Apple®, Macintosh®, Centris®, Quadra®, and

Macintosh II family.

The monitor provides crisp text and vivid color graphics with VGA, SVGA, XGA,

and VESA Ergonomic modes (non-interlaced), and most Macintosh compatible

color video cards when used with the appropriate adaptor. The monitor's wide

compatibility makes it possible to upgrade video cards or software without

purchasing a new monitor.

Digitally controlled auto-scanning is done with the micro-processor for horizontal

scan frequencies between 30 and 96kHz, and vertical scan frequencies

between 50-160Hz.

This monitor is capable of producing a maximum horizontal resolution of 1600

dots and a maximum vertical resolution of 1200 lines.

The microprocessor-based digital controls allow you to adjust conveniently a

variety of image controls by using the OSD (On Screen Display).

USB (Universal Serial Bus) ports at the back of the monitor are prepared for the

USB cable and hub. You can easily and flexibly connect USB-designed devices-

such as a mouse, keyboard or printer- to the monitor for true Plug and Play

function.

Plug and play capability if supported by your system

This monitor has DDC 1 and DDC 2B function.*

Compliant with the following regulated specifications :*

-FCC Compliance Statement

CE Conformity Notice

EPA ENERGY STAR

Swedish MPR II

Swedish TCO’99

For detailed information, please refer to the Reference Guide provided .

ENGLISH

Connecting the Monitor

On the back of the monitor are two plug-in connections; one for the AC

power cord, and the other for the signal cable from the video card.

Power off both the monitor and PC.

Connect the 15 pin VGA connector of the supplied signal cable to the output

VGA video connector on the PC. The connectors will mate only one way. If

you cannot attach the cable easily, turn the connector upside down and try

again. When mated, tighten the thumbscrews to secure the connection.

Locate the appropriate MAC to VGA adapter block at your local computer

store. This adapter changes the high density 3 row 15 pin VGA connector to

the correct 15 pin 2 row connection to mate with your MAC. Attach the other

end of the signal cable to the side of the adapter block with 3 rows.

Connect the attached adapter block/signal cable to the video output on your

MAC.

One end of the AC power cord is connected into the AC power connector on

the back of the monitor. The other end is plugged into a properly grounded

three-prong AC outlet.

Power ON the PC, then the monitor.

If you see the NO SINGNAL message, check the signal cable and

connectors.

After using the system, power OFF the monitor, then the PC.

MAC6MAC6

Power Cord

Signal Cable

D-15P

IBM PC MACINTOSH

D-15P

Mac Adapter

*NOTE : For Apple Macintosh use, a

separate plug adapter is needed to

change the 15 pin high density (3 row)

D-sub VGA connector on the supplied

cable to a 15 pin 2 row connector.

Making use of USB (Universal Serial Bus)

USB (Universal Serial Bus) is an innovation in connecting your different

desktop peripherals conveniently to your computer. By using the USB, you will

be able to connect your mouse, keyboard, printer, and other peripherals to your

monitor instead of having to connect them to your computer. This will give you

greater flexibility in setting up your system. USB allows you to connect chain up

to 120 devices on a single USB port, and you can “hot” plug (attach them while

the computer is running) or unplug them while maintaining Plug and Plug auto

detection and configuration. This monitor has an integrated self-powered USB

hub, allowing up to 4 other USB devices to be attached it.

USB connection

1. Connect the upstream port of the monitor to the downstream port of the USB

compliant PC or another hub using the USB cable (Computer must have a

USB port).

2. Connect the USB compliant peripherals to the downstream ports of the

monitor.

USB upstream Port

USB downstream Ports

connect the cables from USB

compliant peripherals-such as

keyboard, mouse, printer,

scanner, etc

To USB downstream port of

the USB compliant PC or

another hub cable

keyboard

printer

mouse

etc.

NOTE

To activate the USB hub function, the monitor must be connected to a USB compliant

PC(OS) or another hub with the USB cable(enclosed).

When connecting the USB cable, check that the shape of the connector at the cable

side matches the shape at the connecting side.

When the monitor is not plugged into an electric socket, the peripherals connected to

the downstream ports will not operate.

Even if the monitor is in a power saving mode, USB compliant devices will function

when they are connected the USB ports(both the upstream and downstream) of the

monitor.

Location and Function of Controls

Rear View

Front View

ID Label

D-Sub Signal Cable

AC Power Socket

OSD SET

Power Button

Power Indicator

OSD Button

Buttons

SET Button

USB upstream port

USB downstream ports

OSD SET

Control Panel Function

Front Panel Controls

Buttons Use these buttons to choose or adjust items in

the on screen display.

OSD Button Use this button to enter or exit the on screen

display.

OSD

SET

This Indicator lights up green when the monitor

operates normally. If the monitor is in DPM

(Energy Saving) mode (stand-by/suspend/off),

this indicator color changes to amber.

Power (DPMS)

Indicator

Use this button to turn the monitor on or off.Power Button

Use this button to enter a selection in the on

screen display.

SET Button

Control Function

Buttons

OSD Button

Power Button

Power (DPMS) Indicator

• Brightness and Contrast can be adjusted directly without

entering the On Screen Display (OSD) system.

Press the buttons to adjust the settings and

then the OSD button to save all changes. The Brightness

and Contrast functions are also available in the On Screen

Display (OSD) menu.

100

SET Button

On Screen Display (OSD) Control Adjustment

Making adjustments to the image size, position and operating parameters of

the monitor are quick and easy with the On Screen Display Control system. A

quick example is given below to familiarize you with the use of the controls.

Following section is an outline of the available adjustments and selections you

can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the OSD Button, then the main menu of the OSD appears.

To acces a control, use the or Buttons. When the icon you want

becomes highlighted, press the SET Button.

Use the Buttons to adjust the item to the desired level.

Accept the changes by pressing the SET Button.

Exit the OSD by Pressing the OSD Button.

NOTE

Allow the monitor to stabilize for at least 30 minutes before making image adjustment.

SET

OSD

SET

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selection and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the items that are shown on the Menu.

OSD Adjust Description

BRIGHTNESS CONTRAST

COLOR

PRESET

TEMP

RED

GREEN

BLUE

6500K 9300K

POSITION

Brightness

Used to adjust the brightness of the screen.

Contrast

Adjust the display to the contrast desired.

PRESET

TEMP

RED

GREEN

BLUE

6500K/ 9300K

To appear the displays color temperature.

•6500K:Slightly reddish white.

•9300K:Slightly bluish white.

User easily color set without adjustment Red,

Green and Blue (R/G/B).

To set your own color levels.

Vertical Position

To move image up and down.

Horizontal Position

To move picture image left and right.

SIZE

Vertical Size

To adjust image height.

Horizontal Size

To adjust image width.

On Screen Display(OSD) Selection and Adjustment

OSD Adjust Description

SHAPE

Side Pincushion

To correct the bowing in and out of the

image.

Side pincushion balance

To correct the balance of both sides

bowing.

Trapezoid

To correct geometric distortion.

Parallelogram

This control adjusts for a skewing of

the screen image.

Tilt

To correct image rotation.

Top Corner

To correct the irregular distortion of

the displayed image.

Bottom Corner

To correct the irregular distortion of

the displayed image.

VIDEO LEVEL 0.7V

LANGUAGE ENGLISH

CLAMP SEP

OSD POSITION

SETUP

This item is used to select the

monitor's input signal level. The

normal level used for most PC's is

0.7V.

When the screen suddenly gets

brightened or blurry, please select

1.0V and try again.

To choose the language in which the

control names are displayed.

OSD Menus are available in 8

language: English, Deutsch, Français,

Español, Italiano, Svenska, Suomi

and Português.

To adjust position of the OSD window

on the screen.

In case of input SOG(Sync On Green)

Video Signal, the back raster will

appear the green. Then, to select the

SOG(Sync On Green) in the clamp,

will take you back to the original back

raster.

VIDEO LEVEL

LANGUAGE

OSD POSITION

CLAMP

You can use this function when you want

to go back to the screen display of the

time you purchased the product after

adjusting to modify it in the Preset Mode.

When you are in the User mode, you can

recall only , , , , , ,

convergence items. After using Recall,

adjust the screen display again if

necessary. If you want more information

on the Preset Mode, refer to A10 page.

On Screen Display(OSD) Selection and Adjustment

OSD Adjust Description

To manually demagnetize the screen

which may show some image or color

incorrectly.

SPECIAL

DEGAUSS ON

RECALL ON

MOIRE H: 0/V: 0

CONVERGENCE H:50/V:50

PURITY :50

54.4kHz/60.0Hz

USER MODE

DEGAUSS

RECALL

This item allows you to reduce the

moire (Moire is caused by

interference Horizontal Scan Line with

the periodical dot screen). It is

normally OFF(H:0/V:0).

The moire adjustments may affect the

focus of the screen.

The screen image may shake slightly

while the moire reduction function is

on.

MOIRE

Use to adjust the alignment of red

and blue fields.

CONVERGENCE

Use to adjust the purity on the screen

if the color appears uneven.

(1) Adjust the purity of the upper left

corner of the screen.

(2) Adjust the purity of the upper right

corner of the screen.

(3) Adjust the purity of the lower left

corner of the screen.

(4) Adjust the purity of the lower right

corner of the screen.

PURITY

A10

Video Memory Modes

The monitor has 31 memory locations for display modes, 5 of which are

factory preset to popular video modes.

Preset Modes (Resolution)

User Modes

Modes 6-31 are empty and can accept new video data. If the monitor detects a

new video mode that has not been present before or is not one of the preset

modes, it stores the new mode automatically in one of the empty modes

starting with mode 6.

If you use up the 26 blank modes and still have more new video modes, the

monitor replaces the information in the user modes starting with mode 6.

Recalling Display Modes

When your monitor detects a mode it has seen before, it automatically recalls

the image settings you may have made the last time you used that mode.

You may, however, manually force a recall of each of the 5 preset modes by

pressing the Recall button. All preset modes are automatically recalled as the

monitor senses the incoming signal.

The ability to recall the preset modes is dependent on the signal coming from

your PC’s video card or system. If this signal does not match any of the factory

modes, the monitor automatically sets itself to display the image.

Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz)

640 x 480

800 x 600

1024 x 768

1280 x 1024

1600 x 1200

43.269

53.674

68.677

91.146

93.750

VESA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Monitor Handbücher

LG 23LX2R Bedienungsanleitung

LG 27UL650-W.AMF Bedienungsanleitung

LG 49XS4J Bedienungsanleitung

LG E2350VR-SN Bedienungsanleitung

LG UltraGear 27GN850 Bedienungsanleitung

LG 65UM3F UM3F Series Bedienungsanleitung

LG Studio Works 505E Bedienungsanleitung

LG FLATRON L226WTQ-BFQ.A MQF Series Bedienungsanleitung

LG FLATRON N1642W-PF.ATR Bedienungsanleitung

LG 38WN75C-B.AEK Bedienungsanleitung

LG L2000C - - 20.1" LCD Monitor Bedienungsanleitung

LG UltraGear 24GL65B-B Bedienungsanleitung

LG M4224N Bedienungsanleitung

LG L177WSB Bedienungsanleitung

LG Flatron F730BL-AL QE Series Bedienungsanleitung

LG Flatron W1642C Bedienungsanleitung

LG 32UP83A Bedienungsanleitung

LG Flatron L1953S Bedienungsanleitung

LG 27UK650 Bedienungsanleitung

LG 24MP60G Bedienungsanleitung

LG 34WP580 Bedienungsanleitung

LG UltraFine 27UN880-B Bedienungsanleitung

LG 27SR50F Bedienungsanleitung

LG 24BK550Y Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Sceptre

Sceptre D40 Bedienungsanleitung