LG M4224N-B32 Bedienungsanleitung

www.lg.com

OWNER’S MANUAL

MONITOR SIGNAGE

MONITOR SIGNAGE MODELS

M4224N

Please read this manual carefully before operating

your set and retain it for future reference.

ENGLISH

Connecting the stand

First, check if the following parts are all present.

Stand (2)

Screws (4)

Parts

Take the parts for the stand out of the box and assemble them as shown in the

picture.

Place a soft cloth on the table and put the product with the screen facing down-

ward. Connect the stand as shown in the following picture.

- Only on some models.

Use the screws to secure the stand on the rear side of the product as shown in

the diagram.

Connecting the Speakers

Mount the product onto the speaker by using a screw as shown in the following

connect the speaker cable.

- Only on some models.

When the speaker is installed.

*Connect the input terminal with a proper color match.

Remove the paper.

Cable holder

After installing your speakers, use holders and cable ties to organize the speaker cables.

* This feature is not available in all model.

Cable tie

Using the Remote Control

1 2 3

4 5 6

7 8

CTR.

PWR

There is not a function

which is supported

There is not a function

which is supported

▪ Menu Button

▪

Check Button

▪

Volume Button

▪ Mute button

Name of the Remote Control Buttons

There is not a function

which is supported

▪

UP and Down buttons

Bring up and down direction

adjustment.

▪

ARC button

To select the image size

of the screen.

▪

Auto Button

Automatic adjustment

function (Operational for

the analog signal only)

▪

Exit Button

There is not a function

which is supported

There is not a function

which is supported

▪

CTR.PWR Button

Turn on the power of the

PC built in the monitor

and then turn off.

(The CTR.PWR function

operates only when the

PC Control menu is off.)

▪

Power On/Off Button

▪

Input Select Button

(See next page)

Using the Remote Control

1 2 3

4 5 6

7 8

CTR.

PWR

If you press the button once,

the following Input Signal

Window will appear. Select

the signal type you want

using the ▼▲ button.

▪

Input Select Button

1. Take out the battery cap.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cap.

▪ Dispose of used batteries in the recycle bin to prevent

environmental pollution.

Inserting batteries into remote control.

RGB

DVI

INPUT

AAA Type

Name and Function of the Parts

Rear View

*LINE OUT

A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure

that the connecting terminal of the PC sound card is checked before connecting. If the

Audio Out of PC sound card has only Speaker Out, reduce the PC volume.

If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert

to Line Out using the card jumper of the program (Refer to the Sound Card Manual).

* The product image in the user’s guide could be different from the actual image.

H/PHONE

OUT

RGB IN

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

RGB OUT

Power Connector : Connect the power cord

RS-232C Serial Ports (IN, OUT)

RGB, DVI Ports (IN, OUT)

PC Sound Jack

: Connect the audio cable to the *LINE OUT jack of the PC sound card.

ired Remote Control Port

Speaker Ports

LAN Ports

USB Ports :

Program installation and operation can be done by using USB Memory, USB Hard-

Disk, USB CD-ROM, Keyboard (Wired or wireless), Mouse (wired or wireless), etc.

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

Head Phone out Port

MIC IN Ports

Optical Sound out Ports

Serial Ports

RGB out Ports

Connecting to External Devices

When Connecting to your Built in PC

H/PHONE

OUT

RGB IN

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

RGB OUT

Rear side of the product.

Connect the power cord.

When connecting with the DVI signal input

Turn on power by pressing the power button on the product.

AUTO/SET

SOURCE

AUTO/SET

SOURCE

Power button

▪ Select DVI :

DVI

Digital signal.

3. Select an input signal.

Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button at the back side of the product.

RGB

DVI

INPUT

SOURCE

SET

AUTO/SET

INPUT

SOURCE

SET

AUTO/SET

Connecting to External Devices

Turn on power by pressing the power button on the product.

AUTO/SET

SOURCE

AUTO/SET

SOURCE

Power button

When connecting with the D-Sub signal input cable.

H/PHONE

OUT

RGB IN

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

RGB OUT

Rear side of the product.

* User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with fer-

rite cores to maintain standard compliance for the product.

H/PHONE

OUT

RGB IN

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

RGB OUT

Connect the Audio Cable

Rear side of the product.

H/PHONE

OUT

RGB IN

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

OUT

RGB IN

RGB OUT

DVI IN

RS-232C

(CONTROL)

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

LAN

USB

USB H/PHONE

OUT

MIC IN SP/DIF SERIAL PORT RGB OUT

RGB OUT

Rear side of the product.

Connect the Power Cord

Connecting to External Devices

Move the mouse pointer

to an empty area on the

Windows screen (with no

icons or task bars) and

click the right mouse but-

ton.

2When the pop-up menu

appears, click the

‘Graphics Options' menu.

3click the 'Output To' menu.

4click the 'Monitor' menu.

Select an input signal.

Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button at the back side of the product.

INPUT

SOURCE

SET

AUTO/SET

INPUT

SOURCE

SET

AUTO/SET

When connecting with a D-Sub signal input cable.

▪ Select RGB : 15-pin

D-Sub

analog signal.

RGB

DVI

INPUT

▪

How to connect to two computers.

Connect the signal cables (DVI and D-Sub) to each computer.

Press the INPUT button in a remote control to select the computer to use.

▪

Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.

Note

Connecting to External Devices

* In order to convert the RGB signal to the DVI signal

Select an input signal.

Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button at the back side of the product.

INPUT

SOURCE

SET

AUTO/SET

INPUT

SOURCE

SET

AUTO/SET

When connecting with a DVI signal input cable.

▪ Select DVI :

DVI

Digital signal.

RGB

DVI

INPUT

Move the mouse point-

er to an empty area on

the Windows screen

(with no icons or task

bars) and click the right

mouse button.

2When the pop-up menu

appears, click the

'Graphics Options' menu.

3Click the 'Output To' menu.

4Click the 'Digital Display'

menu.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Sceptre

Sceptre D40 Bedienungsanleitung