LG StudioWorks 563N Bedienungsanleitung

Introduction

Thank you for purchasing a high resolution monitor. It will give you high

resolution performance and convenient reliable operation in a variety of

video operating modes.

Features

The Studioworks 563N/563A is a 15 inches (14.0 inches viewable ) intelligent,

microprocessor based monitor compatible with most analog RGB (Red, Green,

Blue) display standards, including IBM PC®, PS/2®, Apple®, Macintosh®, Centris®,

Quadra®, and Macintosh II family.

The monitor provides crisp text and vivid color graphics with VGA, SVGA, XGA,

and VESA Ergonomic modes (non-interlaced), and most Macintosh compatible

color video cards when used with the appropriate adaptor. The monitor's wide

compatibility makes it possible to upgrade video cards or software without

purchasing a new monitor.

Digitally controlled auto-scanning is done with the micro-processor for horizontal

scan frequencies between 30 and 61kHz, and vertical scan frequencies

between 50-120Hz.

This monitor is capable of producing a maximum horizontal resolution of 1024

dots and a maximum vertical resolution of 768 lines.

The microprocessor-based digital controls allow you to adjust conveniently a

variety of image controls by using the OSD (On Screen Display).

On Screen Display(OSD) adjustments in seven languages:

English, Deutsch, Français, Español, Italiano, Português, Korean for ease of

setup and screen optimization

Plug and play capability if supported by your system.

This monitor has DDC 2B function.*

Compliant with the following regulated specifications :*

EPA ENERGY STAR

MPR

II (Applies to 563N only)

ENGLISH

For detailed information, please refer to the Reference Guide provided .

Slots

Latch

Hooks

Connecting the Monitor

Turn off the equipment and all attached options.

Carefully set the monitor face-down with the underside facing you.

Installation

1. Align the hooks on the tilt/swivel stand with the matching slots in the base of

the monitor.

2. Insert the hooks into slots.

3. Slide the tilt/swivel stand toward the front of the monitor until the latches click

into the locked position.

Latch

Hooks

Connecting the Monitor

On the back of the monitor are two plug-in connections; one for the AC

power cord, and the other for the signal cable from the video card.

Power off both the monitor and PC.

Connect the 15 pin VGA connector of the supplied signal cable to the output

VGA video connector on the PC and the matching input connector on the rear

of the monitor. The connectors will mate only one way. If you cannot attach

the cable easily, turn the connector upside down and try again. When mated,

tighten the thumbscrews to secure the connection.

Locate the appropriate MAC to VGA adapter block at your local computer

store. This adapter changes the high density 3 row 15 pin VGA connector to

the correct 15 pin 2 row connection to mate with your MAC. Attach the other

end of the signal cable to the side of the adapter block with 3 rows.

Connect the attached adapter block/signal cable to the video output on your

MAC.

One end of the AC power cord is connected into the AC power connector on

the back of the monitor. The other end is plugged into a properly grounded

three-prong AC outlet.

Power ON the PC, then the monitor.

If you see the SELF DIAGNOSTICS message, check the signal cable and

connectors.

After using the system, power OFF the monitor, then the PC.

Power Cord

Signal Cable

D-15P

IBM PC MACINTOSH

D-15P

Mac Adapter

*NOTE : For Apple Macintosh use, a

separate plug adapter is needed to

change the 15 pin high density (3 row)

D-sub VGA connector on the supplied

cable to a 15 pin 2 row connector.

Location and Function of Controls

Rear View

Front View

MENU SELECT

ID Label

D-Sub Signal Cable

AC Power Socket

Power Indicator

SELECT Button

Button

MENU Button

Power ON/OFF Button

Control Panel Function

Front Panel Controls

MENU SELECT

Button Use these buttons to choose or adjust items in

the on screen display.

MENU Button Use this button to enter or exit the on screen

display.

SELECT

This Indicator lights up green when the

monitor operates normally. If the monitor is in

DPM (Energy Saving) mode (stand-

by/suspend/power off), this indicator color

changes to amber.

Power (DPMS)

Indicator

Use this button to turn the monitor on or off.Power ON/OFF

Button

Use this button to enter a selection in the on

screen display.

SELECT Button

Control Function

Button

Power ON/OFF Button

MENU Button SELECT Button

Power (DPMS) Indicator

On Screen Display (OSD) Control Adjustment

Making adjustments to the image size, position and operating parameters of

the monitor are quick and easy with the On Screen Display Control system.

A quick example is given below to familiarize you with the use of the controls.

Following section is an outline of the available adjustments and selections you

can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the MENU Button, then the main menu of the OSD appears.

To acces a control, use the or Buttons. When the icon you want

becomes highlighted, press the SELECT Button.

Use the Buttons to adjust the item to the desired level.

Accept the changes by pressing the SELECT Button.

Exit the OSD by Pressing the MENU Button.

NOTE

Allow the monitor to stabilize for at least 30 minutes before making image adjustment.

SELECT

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selection and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the items that are shown on the Menu.

OSD Adjust Description

31.4kHz/70Hz

CONTRAST

31.4kHz/70Hz

BRIGHTNESS

31.4kHz/70Hz

H POSITION

31.4kHz/70Hz

H SIZE

31.4kHz/70Hz

V POSITION

Used to adjust the brightness of the

screen.

Adjust the display to the contrast desired.

To move image up and down.

Moves the screen image down.

Moves the screen image up.

To move picture image left and right.

Moves the screen image left.

Moves the screen image right.

To adjust image width.

Decreases the size of the screen

image.

Increases the size of the screen

image.

CONTRAST

BRIGHTNESS

H POSITION

H SIZE

V POSITION

On Screen Display(OSD) Selection and Adjustment

OSD Adjust Description

31.4kHz/70Hz

V SIZE

31.4kHz/70Hz

PINCUSHION

31.4kHz/70Hz

TRAPEZOID

31.4kHz/70Hz

PIN BALANCE

31.4kHz/70Hz

PARALELOGRAMO

To correct the bowing in and out of the

image.

Curves the image's edges

inwards.

Curves the image's edges

outwards.

To correct the balance of both sides

bowing.

Curvature of the sides to the right.

Curvature of the sides to the left.

To correct geometric distortion.

Makes the screen image narrower

at the top.

Makes the screen image wider at

the top.

This control adjusts for a skewing of the

screen image.

Tilts the screen image leftward.

Tilts the screen image rightward.

To adjust image height.

Decreases the size of the screen

image.

Increases the size of the screen

image.

V SIZE

PINCUSHION

TRAPEZOID

PIN BALANCE

PARALLELOGRAM

31.4kHz/70Hz

V MOIRE

Reduce vertical moire when

interference patterns of dark steady

wary lines appear on your screen.

The moire adjustments may affect the

focus of the screen.

V MOIRE

On Screen Display(OSD) Selection and Adjustment

OSD Adjust Description

31.4kHz/70Hz

COLOR

31.4kHz/70Hz

COLOR

9300 6500 R G B

31.4kHz/70Hz

RECALL

31.4kHz/70Hz

LANGUAGE

31.4kHz/70Hz

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

Select the desired color temperature

(9300K, 6500K) or select user to set

your own color levels(R/G/B).

•9300 : Slightly bluish white.

•6500 : Slightly reddish white.

•: To set your own color levels.

Allow for specific

adjustments to Red, Green,

Blue (R/G/B).

Decreases the amount of

color in the image.

Increases the amount of

color in the image.

: To exit the COLOR OSD

You can use this function when you want

to go back to the screen display of the

time you purchased the product after

adjusting to modify it in the Preset Mode.

When you are in the User mode, you can

recall only , , , items. After

using Recall, adjust the screen display

again if necessary.

If you want more information on the

Preset Mode, refer to A11 page.

COLOR

RECALL

R G B

To choose the language in which the

control names are displayed.

OSD Menus are available in seven

languages : English, German,

French, Spanish, Italian, Portuguese

and Korean.

LANGUAGE

A10

On Screen Display(OSD) Selection and Adjustment

OSD Adjust Description

Used to demagnetize the picture to

give a move accurate image and

color.

To inform users of preset and user

mode data.

DEGAUSS

INFORMATION

31.4kHz/70Hz

DEGAUSS

31.4kHz/70Hz

INFORMATION

31.4kHz/70Hz

INFORMATION

PRESET MODE

1 60.0kHz / 76Hz

2 31.4kHz / 61Hz

3 37.4kHz / 76Hz

4 43.2kHz / 86Hz

5 31.4kHz / 71Hz

6 46.8kHz / 76Hz

Andere Handbücher für StudioWorks 563N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Monitor Handbücher

LG UltraGear 27GN850 Bedienungsanleitung

LG 29WQ600 Bedienungsanleitung

LG 42PM4M Bedienungsanleitung

LG MU-50PZ41A Bedienungsanleitung

LG M198WDP Bedienungsanleitung

LG 49WQ95X Bedienungsanleitung

LG E2042SA Bedienungsanleitung

LG E1941S Bedienungsanleitung

LG 32MR50C-B.AEUQ Bedienungsanleitung

LG 49WL95CP-W.AEU Bedienungsanleitung

LG L1960SR Bedienungsanleitung

LG 24BP55Q Bedienungsanleitung

LG 27HJ712C-W.AWP Bedienungsanleitung

LG T710SH Bedienungsanleitung

LG UltraGear 27GR82Q Bedienungsanleitung

LG 23CAV42K-B Bedienungsanleitung

LG Flatron W2242S Bedienungsanleitung

LG UltraGear 49GR85DC Bedienungsanleitung

LG M4225C Bedienungsanleitung

LG UltraGear 24GN650B Bedienungsanleitung

LG UltraGear 27GN65R Bedienungsanleitung

LG D2342P Bedienungsanleitung

LG M3203CCBA Bedienungsanleitung

LG Flatron W1942S Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Sceptre

Sceptre D40 Bedienungsanleitung