LG PB56 Series Bedienungsanleitung

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating

your set and retain it for future reference.

PB56**

P/NO : MFL67982103 (1406-REV05)

Printed in Korea

www.lg.com

*MFL67982103*

ENG

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the double-

D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Denition Multimedia Interface, and the

HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

ABOUT DIVX VIDEO: DivX®is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an ofcial DivX Certied®device that

has passed rigorous testing to verify that it plays DivX video. Visit divx.

com for more information and software tools to convert your les into DivX

video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied®device must be

registered in order to play purchased DivX Video-on-Demand (VOD) movies.

To obtain your registration code, locate the DivX VOD section in your device

setup menu. Go to vod.divx.com for more information on how to complete

your registration.

“DivX Certied®to play DivX®video up to HD 1080p, including premium

content.”

“DivX®, DivX Certied®and associated logos are trademarks of Rovi Corpo-

ration or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in

this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices

are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of media, shipping and handling) upon email request

to [email protected]. This offer is valid for three (3) years from the date on which you purchased

the product.

ENGENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yDo not place the TV and/or remote control

in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a

bathroom

- Near any heat source such as stoves

and other devices that produce heat

- Near kitchen counters or humidifiers

where they can easily be exposed to

steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric

shock, malfunction or product deformation.

yDo not place the product where it might

be exposed to dust.

This may cause a fire hazard.

yMains Plug is the TV connecting/

disconnecting device to AC mains electric

supply. This plug must remain readily

attached and operable when TV is in use.

yDo not touch the power plug with wet

hands. Additionally, if the cord pin is wet

or covered with dust, dry the power plug

completely or wipe dust off.

You may be electrocuted due to excess

moisture.

yMake sure to connect Mains cable to

compliant AC mains socket with Grounded

earth pin. (Except for devices which

are not grounded on earth.) Otherwise

possibility you may be electrocuted or

injured.

yInsert power cable plug completely into

wall socket otherwise if not secured

completely into socket, fire ignition may

break out.

yEnsure the power cord does not come into

contact with hot objects such as a heater.

This may cause a fire or an electric shock

hazard.

yDo not place a heavy object, or the

product itself, on power cables.

Otherwise, this may result in fire or electric

shock.

yBend antenna cable between inside and

outside building to prevent rain from

flowing in.

This may cause water damaged inside the

Product and could give an electric shock.

ENG

ENGLISH

SAFETY INSTRUCTIONS

yWhen mounting TV onto wall make sure

to neatly install and isolate cabling from

rear of TV as to not create possibility of

electric shock /fire hazard.

yDo not plug too many electrical devices

into a single multiple electrical outlet.

Otherwise, this may result in fire due to

over-heating.

yDo not drop the product or let it fall over

when connecting external devices.

Otherwise, this may result in injury or

damage to the product.

yKeep the anti-moisture packing material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach

of children.

yDo not let your children climb or cling onto

the TV. Otherwise, the TV may fall over,

which may cause serious injury.

yDispose of used batteries carefully

to ensure that a small child does not

consume them. Please seek Doctor-

Medical Attention immediately if child

consumes batteries.

yDo not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver)

between power cable plug and input Wall

Socket while it is connected to the input

terminal on the wall. Additionally, do not

touch the power cable right after plugging

into the wall input terminal. You may be

electrocuted. (Depending on model)

yDo not put or store inflammable

substances near the product. There is a

danger of combustion/explosion or fire due

to careless handling of the inflammable

substances.

yDo not drop metallic objects such as

coins, hair pins, chopsticks or wire into

the product, or inflammable objects such

as paper and matches. Children must

pay particular attention. Electrical shock,

fire or injury can occur. If a foreign object

is dropped into the product, unplug the

power cord and contact the service centre.

yDo not spray water on the product or

scrub with an inflammable substance

(thinner or benzene). Fire or electric shock

accident can occur.

ENGENGLISH

SAFETY INSTRUCTIONS

yDo not allow any impact, shock or any

objects to fall into the unit, and do not

drop anything onto the screen.

You may be injured or the product can be

damaged.

yNever touch this product or antenna

during a thunder or lighting storm.

You may be electrocuted.

yNever touch the wall outlet when there is

leakage of gas, open the windows and

ventilate.

It may cause a fire or a burn by a spark.

yDo not disassemble, repair or modify the

product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check,

calibration or repair.

yIf any of the following occur, unplug the

product immediately and contact your

local service centre.

- The product has been impacted by

shock

- The product has been damaged

- Foreign objects have entered the

product

- The product produced smoke or a

strange smell

This may result in fire or electric shock.

yUnplug the TV from AC mains wall socket

if you do not intend to use the TV for a

long period of time. Accumulated dust

can cause fire hazard and insulation

deterioration can cause electric leakage/

shock/fire.

yApparatus shall not be exposed to

dripping or splashing and no objects

filled with liquids, such as vases, shall be

placed on the apparatus.

yDo not install this product on a wall if it

could be exposed to oil or oil mist. This

may damage the product and cause it to

fall.

CAUTION

yInstall the product where no radio wave

occurs.

yThere should be enough distance between

an outside antenna and power lines to

keep the former from touching the latter

even when the antenna falls.

This may cause an electric shock.

yDo not install the product on places such

as unstable shelves or inclined surfaces.

Also avoid places where there is vibration

or where the product cannot be fully

supported. Otherwise, the product may

fall or flip over, which may cause injury or

damage to the product.

ENG

ENGLISH

SAFETY INSTRUCTIONS

yIf you install the TV on a stand, you need

to take actions to prevent the product from

overturning. Otherwise, the product may

fall over, which may cause injury.

yIf you intend to mount the product to a

wall, attach VESA standard mounting

interface (optional parts) to the back of the

product. When you install the set to use

the wall mounting bracket (optional parts),

fix it carefully so as not to drop.

yOnly use the attachments / accessories

specified by the manufacturer.

yWhen installing the antenna, consult

with a qualified service technician. If not

installed by a qualified technician, this

may create a fire hazard or an electric

shock hazard.

yWe recommend that you maintain a

distance of at least 2 to 7 times the

diagonal screen size when watching TV.

If you watch TV for a long period of time,

this may cause blurred vision.

yOnly use the specified type of battery.

This could cause damage to the remote

control.

yDo not mix new batteries with old

batteries. This may cause the batteries to

overheat and leak.

yBatteries should not be exposed to

excessive heat. For example, keep away

from direct Sunlight, open fireplace and

electric heaters.

yDo not place non-rechargeable batteries

in charging device.

yMake sure there are no objects between

the remote control and its sensor.

ySignal from Remote Control can be

interrupted due to external/internal lighting

eg Sunlight, fluorescent lighting.If this

occurs turn off lighting or darken viewing

area.

yWhen connecting external devices such

as video game consoles, make sure the

connecting cables are long enough.

Otherwise, the product may fall over,

which may cause injury or damage the

product.

yDo not turn the product On/Off by

plugging-in or unplugging the power plug

to the wall outlet. (Do not use the power

plug for switch.)

It may cause mechanical failure or could

give an electric shock.

yPlease follow the installation instructions

below to prevent the product from

overheating.

- The distance between the product and

the wall should be more than 10 cm.

- Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in

a cupboard).

- Do not install the product on a carpet or

cushion.

- Make sure the air vent is not blocked by

a tablecloth or curtain.

Otherwise, this may result in fire.

ENGENGLISH

SAFETY INSTRUCTIONS

yTake care not to touch the ventilation

openings when watching the TV for long

periods as the ventilation openings may

become hot. This does not affect the

operation or performance of the product.

yPeriodically examine the cord of your

appliance, and if its appearance indicates

damage or deterioration, unplug it,

discontinue use of the appliance, and

have the cord replaced with an exact

replacement part by an authorized

servicer.

yPrevent dust collecting on the power plug

pins or outlet.

This may cause a fire hazard.

yProtect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or

walked upon. Pay particular attention to

plugs, wall outlets, and the point where

the cord exits the appliance.

yDo not press strongly upon the panel

with a hand or sharp object such as nail,

pencil or pen, or make a scratch on it, as

it may cause damage to screen.

yAvoid touching the screen or holding

your finger(s) against it for long periods

of time. Doing so may produce some

temporary or permanent distortion/

damage to screen.

yWhen cleaning the product and its

components, unplug the power first

and wipe it with a soft cloth. Applying

excessive force may cause scratches or

discolouration. Do not spray with water

or wipe with a wet cloth. Never use glass

cleaner, car or industrial shiner, abrasives

or wax, benzene, alcohol etc., which can

damage the product and its panel.

Otherwise, this may result in fire, electric

shock or product damage (deformation,

corrosion or breakage).

yAs long as this unit is connected to the

AC wall outlet, it is not disconnected from

the AC power source even if you turn off

this unit by SWITCH.

yWhen unplugging the cable, grab the

plug and unplug it, by pulling at the plug.

Don’t pull at the cord to unplug the power

cord from the power board, as this could

be hazardous.

yWhen moving the product, make sure

you turn the power off first. Then, unplug

the power cables, antenna cables and all

connecting cables.

The TV set or power cord may be

damaged, which may create a fire hazard

or cause electric shock.

yWhen moving or unpacking the product,

work in pairs because the product is

heavy.

Otherwise, this may result in injury.

ENG

ENGLISH

SAFETY INSTRUCTIONS

yContact the service centre once a year to

clean the internal parts of the product.

Accumulated dust can cause mechanical

failure.

yRefer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

yIf the product feels cold to the touch, there

may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong

with product.

yThe panel is a high technology display

product with resolution of two million to six

million pixels. You may see tiny black dots

and/or brightly coloured dots (red, blue or

green) at a size of 1 ppm on the panel.

This does not indicate a malfunction and

does not affect the performance and

reliability of the product.

This phenomenon also occurs in third-

party products and is not subject to

exchange or refund.

yYou may find different brightness and

colour of the panel depending on your

viewing position(left/right/top/down).

This phenomenon occurs due to the

characteristic of the panel. It is not related

with the product performance, and it is not

malfunction.

yDisplaying a still image (e.g., broadcasting

channel logo, on-screen menu, scene

from a video game) for a prolonged

time may cause damage to the screen,

resulting in retention of the image, which

is known as image sticking. The warranty

does not cover the product for image

sticking.

Avoid displaying a fixed image on your

television’s screen for a prolonged period

(2 or more hours for LCD, 1 or more hours

for Plasma).

Also, if you watch the TV at a ratio of 4:3

for a long time, image sticking may occur

on the borders of the panel.

This phenomenon also occurs in third-

party products and is not subject to

exchange or refund.

yGenerated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning off the TV

is generated by plastic thermal contraction

due to tempera-ture and humidity. This

noise is common for products where

thermal deformation is required. Electrical

circuit humming/panel buzzing: A low level

noise is generated from a high-speed

switching circuit, which supplies a large

amount of current to operate a product. It

varies depend-ing on the product.

This generated sound does not affect the

performance and reliability of the product.

ENGENGLISH

ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV.

yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yThe available menus and options may differ from the input source or product model that you

are using.

yNew features may be added to this TV in the future.

yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.

yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.

yAny damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty.

ySome models have a thin film attached on to the screen and this must not be removed.

Remote control,

batteries (AAA)

Owner’s manual Ferrite core

(Depending on model)

Stand Screws

3 EA, M5 x L25

Stand Screws

4 EA, M4 x L14

Power Cord

Stand Body / Stand Base Stand Sticker

(Depending on model)

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

yThe items supplied with your product may vary depending on the model.

yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

How to use the ferrite core

- If there are two ferrite cores, follow as shown in Figures 1.

- If there are three ferrite cores, follow as shown in Figures 1 and 2-1(or 2-2).

1 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once.

2 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,

R cable & AV cable. Place the ferrite core close to the TV.

[Cross Section of

Ferrite Core]

(Black)

[to an External

device]

[to the TV]

10 mm(+ / - 5 mm)

[Figure 2-2]

yFor an optimal connection, HDMI cables and USB

devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable

that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port. A

*A 10 mm

*B 18 mm

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.

Contact your dealer to buy these items. These devices only work with certain models. The model

name or design may be changed depending on the upgrade of product functions, manufacturer’s

circumstances or policies.

LG Audio Device

[to a wall plug] [to the TV]

[Figure 1] [Cross Section of

Ferrite Core]

(Black)

Place the ferrite core close to the TV and a wall plug.

Wind the

component Y, Pb, Pr, L, R cable & AV cable

on the ferrite core once.

[to an External

device]

[Figure 2-1]

[to the TV]

10 mm(+ / - 5 mm)

Wind the PC audio cable on the ferrite core once.

Andere Handbücher für PB56 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Plasma-TV Handbücher

LG 42PB4DA - - 42" Plasma TV Bedienungsanleitung

LG 50PA4500 Bedienungsanleitung

LG 42PG6900 Bedienungsanleitung

LG 42 2P PQ Q1 11 Bedienungsanleitung

LG 42PN450D-ZA Bedienungsanleitung

LG 42PQ20D Bedienungsanleitung

LG 42PG20D Bedienungsanleitung

LG RT-50PZ70 Bedienungsanleitung

LG 50PC51 Bedienungsanleitung

LG 50PC1DA Series Bedienungsanleitung

LG 50PK550 Bedienungsanleitung

LG 50PC3D - - 50" Plasma TV Bedienungsanleitung

LG 60PB4DA - - 60" Plasma TV Bedienungsanleitung

LG 50PX1D Bedienungsanleitung

LG 42PG25 Series Bedienungsanleitung

LG 50PY2DR Bedienungsanleitung

LG 60PT1RF Bedienungsanleitung

LG 60PH670S-ZA Bedienungsanleitung

LG 42PW340 Bedienungsanleitung

LG 60PS11 - - 60" Plasma TV Bedienungsanleitung

LG 42PG6900 Bedienungsanleitung

LG 42PN4500 Bedienungsanleitung

LG PA45** Bedienungsanleitung

LG 60PZ950 Bedienungsanleitung

Beliebte Plasma-TV Handbücher anderer Marken

Hitachi

Hitachi 50PD9800TA Bedienungsanleitung

Sony

Sony WEGA KE-P42M1 Bedienungsanleitung

VESTEL

VESTEL PL2000 Bedienungsanleitung

VisionQuest

VisionQuest PVQ-32VGB Bedienungsanleitung

Maxent

Maxent MX-5020HPM Bedienungsanleitung

Samsung

Samsung PA43H4000 Bedienungsanleitung

Samsung

Samsung 7+ series Bedienungsanleitung

Panasonic

Panasonic Viera TH-37PA60EY Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PX80A Bedienungsanleitung

Panasonic

Panasonic VIERA TH-P50X30D Bedienungsanleitung

Panasonic

Panasonic TH-50PX20U/P Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Nexus

Nexus NX422 Bedienungsanleitung

Panasonic

Panasonic TX-PR42U10 Bedienungsanleitung

Panasonic

Panasonic TH42PV500EY Bedienungsanleitung

Panasonic

Panasonic Viera TH-50PE8U Bedienungsanleitung

JVC

JVC AV42PD20ES Bedienungsanleitung

Samsung

Samsung PS42A466P2M Bedienungsanleitung