LG CineBeam PH450U Bedienungsanleitung

Owner's Manual

LG CineBeam

DLP Projector

PH450U

Please read the safety information carefully before using this product.

www.lg.com

P/NO : SAC37034682 (1807-REV00)

ENGLISH

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

This DivX Certied®device has passed

rigorous testing to ensure it plays DivX®

video.

To play purchased DivX movies, rst

your registration code in the DivX VOD

section of your device setup menu.

DivX Certied®to play DivX®video up to

HD 1080p, including premium content.

DivX®, DivX Certied®and associated

logos are trademarks of DivX, LLC and

are used under license.

Covered by DivX Patents 7,295,673;

7,515,710; RE45,052; and others

available at [www.divx.com/patents]

The terms HDMI and HDMI High-

Denition Multimedia Interface, and

the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing

Administrator, Inc. in the United States

and other countries.

• Image shown may differ from your projector.

• Your projector’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

ENGLISH

SAFETY PRECAUTIONS

Please take note of the safety instructions to prevent any potential accident or

misuse of the projector.

• Safety precautions are given in two forms, i.e., WARNING and CAUTION as

detailed below.

WARNING Failure to follow the instructions may cause serious injury and

even death.

CAUTION Failure to follow the instructions may cause personal injury or

product damage.

• Read the owner’s manual carefully and keep it on hand.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning ash with

arrowhead symbol, within an

equilateral triangle, is intended

to alert the user to the presence of

uninsulated dangerous voltage within

the product’s enclosure that may be of

sufcient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within

an equilateral triangle is

intended to alert the user to

the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the

appliance.

WARNING/CAUTION

-TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Indoor Installation

WARNING

• Do not use the projector outside

and do not expose the product to

any humidity or water.

-Since the product is not

waterproof, this may result in a

re or electric shock.

• Do not place the projector in direct

sunlight or near heat sources such

as radiators, fires, stoves, etc.

-This may result in re.

• Do not place flammable materials

such as aerosols near the projector.

-This may result in re.

ENGLISH

• Do not allow children to cling to or

climb up to the projector.

-This may cause the projector to

fall, causing injury or death.

• Do not install the product in a

place with no ventilation (e.g., on

a bookshelf or in a closet) or on a

carpet or cushion.

-This may result in re due to the

increase in internal temperature.

• Do not place the product close to

sources of steam, oil or oil mist,

such as humidifiers and kitchen

counters.

-Failure to do so may result in

re, electric shock, or corrosion.

• Do not install the product onto

a wall or ceiling that is close to

sources of oil or oil mist.

-The product may be damaged

and fall, resulting in serious

injury.

• Do not place the projector where it

might be exposed to dust.

-This may result in re.

• Do not use the projector in a damp

place such as a bathroom where it

is likely to get wet.

-This may result in re or electric

shock.

• Do not allow a tablecloth or curtain

to block the air vent.

-This may result in re due to

the increase in the internal

temperature.

• Ensure good ventilation around the

projector. The distance between the

projector and the wall should be at

least 30 cm.

-This will prevent re due to

the increase in the internal

temperature.

CAUTION

• When placing the projector on a

table or shelf, be careful not to put

it near the edge.

-The projector could fall due to

balance problems, which may

cause personal injury or damage

to the product. Make sure to use

the projector cabinet or stand

that ts the projector.

• When moving the projector, make

sure to switch it off and remove the

power plug and cords.

-The power cord may be

damaged, resulting in re or

electric shock.

• Do not place the projector on an

unstable or vibrating surface such

as a wobbly shelf or a slope.

-It may fall and cause injury.

ENGLISH

• Be careful not to tip the projector

over when connecting external

devices to the projector.

-This may cause personal injury

or damage to the projector.

Power

WARNING

• DISCONNECTING THE DEVICE

FROM THE MAIN POWER

-The Power plug is the

disconnecting device. In case of

an emergency, the Power Plug

must remain readily accessible.

• The grounding wire should be

connected. (Except for devices

which are not grounded.)

-Ensure that you connect the

grounding cable to avoid electric

shock. If it is not possible to

ground the unit, have a qualied

electrician install a separate

circuit breaker.

Do not try to ground the

projector by connecting it to

telephone wires, lightning rods

or gas pipes.

• The power plug should be inserted

fully into the power outlet.

-An unstable connection may

cause a re.

• Do not place heavy objects on the

power cord.

-This may result in re or electric

shock.

• Never touch the power plug with

wet hands.

-This may result in electric shock.

• Do not plug too many devices into

one multi-power outlet.

-This may result in re due to the

power outlet overheating.

• Keep the AC adapter, power plug,

and the used power outlet clean

from dust or foreign materials

building up.

-This may result in re.

• If there is any smoke or a burning

smell from the projector or AC

adapter, stop using the product

immediately. Disconnect the power

cord from the power outlet, and

then contact the customer service

center.

-This may result in re.

• To turn off the main power, remove

the power plug, which should be

positioned so it is easy to access for

operation.

ENGLISH

CAUTION

• Always grab the plug to remove the

AC adapter or power cord.

-Otherwise, this may result in a

re or may damage the product.

• Refrain from constantly bending the

power cord of the AC adapter.

-If the power cord is bent

excessively for a long period

of time, the cord may break

inside. This may result in a re or

electric shock.

• Ensure the power cord and plug are

not damaged, modified, severely

bent, twisted, pulled, sandwiched or

hot. Do not use the product if the

power outlet is loose.

-This may result in re or electric

shock.

• Keep the power cord away from

heating devices.

-The wire’s sheath may melt,

which may result in re or

electric shock.

• Place the projector where people

will not trip over or step on the

power cord to protect the power

cord and plug from any damage.

-This may result in re or electric

shock.

• Do not turn the projector on or

off by plugging in the power plug

or unplugging it from the power

outlet. (Do not use the power plug

as a switch.)

-This may result in electric shock

or damage to the product.

• Do not insert a conductor into the

other side of the wall outlet while

the power plug is inserted into the

wall outlet. In addition, do not touch

the power plug immediately after

it is disconnected from the wall

outlet.

-This may result in electric shock.

• Only use the official power cord

provided by LG Electronics. Do not

use other power cords.

-This may result in re or electric

shock.

• If any water or foreign materials

have gone into the AC adapter,

power cord, or the interior of the

projector, turn off the projector by

pressing the power button. Remove

all the cables, and then contact the

customer service center.

-This may result in re or electric

shock.

ENGLISH

• The surface of the AC adapter is

hot. Keep the AC adapter out of the

reach of children and avoid touching

it during use.

• Never disassemble the power

supply devices (AC adapter/power

cord, etc.).

-This may damage the power

cord and result in a re or

electric shock.

• Connect the AC adapter and the

power cord firmly.

-Not doing so may result in a

product failure or re.

• Do not place heavy objects or put

pressure on the power cord and AC

adapter and avoid damage.

-This may result in a re or may

damage the product.

• Always use the AC adapter provided

or any AC adapters approved and

certified by LG Electronics.

-Any other AC adapter

connected may result in the

screen ickering.

When in Use

WARNING

• Do not place anything containing

liquid on top of the projector

such as a vase, flower pot, cup,

cosmetics, medicine, or ornaments,

candles, etc.

-This may result in re or electric

shock, or cause injury due to

falling.

• In the event that there is a heavy

impact or the cabinet is damaged,

switch it off, unplug it from the

power outlet and contact an

authorized service center.

-This may result in electric shock.

• Do not insert pieces of metal such

as coins, hairpins or metal debris,

nor flammable materials such as

paper or matches into the projector.

-This is to prevent electric shock

or re.

• Make sure that a child does not

swallow the batteries when you

replace the old batteries in the

remote control with new ones. Keep

batteries out of reach of children.

-If a child swallows a battery,

consult a doctor immediately.

ENGLISH

• Never open any cover on the

projector.

-There is a high risk of electric

shock.

• Do not look directly into the lens

when the projector is in use.

-The bright light may damage

your eyes.

• When the lamp is on or has just

been turned off, avoid touching the

air vent or lamp, because these will

be very hot.

• If there is a gas leak in the room

with the projector, do not touch the

projector or power outlet. Open the

windows for ventilation.

-Sparks may cause re or burns.

• Unplug the power cord from the

outlet during a lightning storm.

-This will prevent shock or

damage to the projector.

• Do not use the projector near

electronic devices that generate a

strong magnetic field.

• Keep the plastic film used for

packaging the projector out of the

reach of children.

-If not handled safely, it can

cause suffocation.

• Do not keep your hand on the

projector for a long time when it is

running.

• When you play a game by

connecting a game console to a

projector, it is recommended that

you maintain a distance of more

than four times the diagonal length

of the screen.

-Make sure that the connecting

cable is long enough. Otherwise,

the product may fall causing

personal injury or damage to the

product.

• Do not place the projector or its

remote control with batteries in

an extremely high temperature

environment.

-This may result in re.

• Do not use 3D glasses if you do not

watch 3D.

CAUTION

• Do not place heavy objects on the

projector.

-It may fall down and cause

personal injury.

• Be careful not to allow any impact

to the lens during transport.

• Do not touch the lens of the

projector.

-The lens may be damaged.

• Do not use any sharp tools on

the projector such as a knife or

hammer, because this may damage

the casing.

ENGLISH

• In the event that no image appears

on the screen or no sound is heard,

stop using the projector. Switch

off the projector, unplug it from

the power outlet and contact our

service center.

-This may result in re or electric

shock.

• Do not drop anything onto the

projector or allow anything to bang

into the projector.

-This may cause damage to the

projector or personal injury.

• It is recommended that you

maintain a distance of more than

5 to 7 times the diagonal length of

the screen.

-If you watch the screen at a

close distance for a long time,

your eye sight may become

worse.

• Do not block the light beam emitted

from the projector using a book or

other object.

-Lengthy exposure to the

projector beam may result in

re. In addition, the lens may

be overheated and damaged by

the reected heat. Disable the

AV function to stop projection

temporarily or turn off the

power.

• Do not start the projector with the

volume turned up high.

-High volume may damage

hearing.

• Do not use high voltage electrical

equipment near the projector, (e.g.,

a bug zapper). This may result in

product malfunction.

Cleaning

WARNING

• Do not spray the projector with

water when cleaning. Make sure

water does not flow into the

projector.

-This may result in re or electric

shock.

• When there is smoke or a strange

smell coming out from the projector

or a foreign object falls into the

projector, please switch it off and

unplug it from the power outlet and

contact our service center.

-Otherwise, this may result in re

or electric shock.

ENGLISH

CAUTION

• Contact your seller or our service

center once a year to clean the

internal parts of the projector.

-If you do not clean the projector

for a long period of time, dust

will accumulate, which may

result in re or damage to the

projector.

• When cleaning plastic parts such

as the projector case, unplug the

power first and wipe with a soft

cloth. Do not spray with water

or wipe with a wet cloth. Never

use glass cleaner, automobile or

industrial polish, abrasives, wax,

benzene, or alcohol as these can

damage the projector.

-This can result in re, electric

shock or cause damage to

the product (deformation and

corrosion).

• Do not wipe the optical system

(lens, mirror) right after the product

has been turned off or while the

product is being operated. When

cleaning each part of the product,

remove the power cord and wipe

gently with a soft cloth. Do not

spray with water or wipe with a

wet cloth. Do not use detergents,

automobile or industrial polish,

abrasive substances, wax, benzene,

alcohol, water, etc. on the product’s

main unit or optical system (lens,

mirror) as this may damage the

product.

-This can result in re, electric

shock or cause damage to

the product (deformation and

corrosion).

• Remove the plug from the outlet

before cleaning the product.

-Otherwise, this may result in

electric shock.

Andere Handbücher für CineBeam PH450U

Inhaltsverzeichnis

Andere LG Projektor Handbücher

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung