LG LED 500 Bedienungsanleitung

LED 500TM Digital Art Projector

(PB60A)

Owner’s Manual

Please read this manual carefully before operating

your projector and retain it for future reference.

2LICENSES

This device meets the EMC requirements for home appliances (Class B) and is

intended for home usage. This device can be used in all regions.

LICENSES

Supported licenses may differ by model.

Manufactured under license from Dolby Laboratories.

“Dolby “and the double-D symbol are trademarks of Dolby

Laboratories.

ABOUT DIVX VIDEO: DivX® is a digital video format created

by DivX, LLC, a subsidiary of Rovi Corporation. . This is an

ofﬁcial DivX Certiﬁed® device that plays DivX video. Visit divx.

com for more information and software tools to convert your

ﬁles into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed®

device must be registered in order to play purchased DivX

Video-on-Demand (VOD) movies. To obtain your registration

code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete

your registration.

“DivX Certiﬁed® to play DivX® video up to HD 1080p,

including premium content.”

“DivX®, DivX Certiﬁed® and associated logos are trademarks

of Rovi Corporation or its subsidiaries and are used under

license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

The terms HDMI and HDMI High-Deﬁnition Multimedia

Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and

other countries.

NOTE

 Image shown may differ from your projector.

 Your projector’s OSD (On Screen Display) may differ slightly from that shown in

this manual.

SAFETY INSTRUCTIONS

Please take note of the safety instructions to prevent any potential accident

or misuse of the projector.

The lightning ﬂash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufﬁcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point

within an equilateral

triangle is intended to alert

the user to the presence

of important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

4SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Indoor Installation

WARNING

 Do not place the projector in direct

sunlight or near heat sources such as

radiators, fires, stoves, etc.

- This may cause a fire.

 Do not place flammable materials

such as aerosols near the projector.

- This may cause a fire.

 Do not allow your children to cling to

or climb up to the projector.

- The projector may fall down and

cause personal injury or death.

 Do not place the projector directly on

a carpet, rug or place where ventila-

tion is restricted such as a book shelf

or closet.

- This may cause the projector's in-

ternal temperature to rise and cause

a fire.

 Do not place the projector close to

sources of steam or oil such as a

humidifier or kitchen counter.

- This may cause a fire hazard or an

electric shock.

 Do not place the projector where it

might be exposed to excessive dust.

- This may cause a fire.

 Do not use the projector in a damp

place such as a bathroom where it is

likely to get wet.

- This may cause a fire or an electric

shock.

 Do not allow a tablecloth or curtain to

block the vents.

- This may cause the internal tem-

perature of the projector to rise and

cause a fire.

 The distance between the projector

and the wall should be more than 30

cm for ventilation purposes.

- Otherwise, this may cause the inter-

nal temperature of the projector to

rise and cause a fire.

CAUTION

 When installing the projector on a

table, be careful not to place it near

the edge.

- The projector may fall causing injury

to persons or damage to the projec-

tor. Make sure that you use a stand

suitable for the size of projector.

 Turn off the projector, disconnect the

power supply and remove all connec

tions before moving the projector.

- A damaged cord may cause a fire

or an electric shock.

 Do not install the projector on an

unstable or vibrating surface such as

a vibrating shelf or tilted surface.

- It may fall and cause injury.

 Be careful not to tip the projector over

when connecting external devices to

the projector.

- This may cause injury to persons or

damage to the projector.

SAFETY INSTRUCTIONS

Power

WARNING

 The earth wire should be connected.

- Inappropriate earth grounding may

cause damage to the projector or

an electric shock when there is an

electrical surge.

If the projector must be installed at

a place where earth grounding is not

possible, purchase a circuit breaker

and connect the projector to its wall

outlet.

Do not ground the projector to the

gas pipe, water pipe, lightning rod,

or telephone line, etc.

 The power plug should be fully insert-

ed into the wall outlet.

- Unstable connection may cause a

fire.

 Do not place heavy objects on the

power cord or place the cord under-

neath the projector.

- This may cause a fire or an electric

shock.

 Never touch the power plug with a

wet hand.

- This may cause an electric shock.

 Do not connect too many devices to

the same power extension.

- Overheating may cause a fire.

 Remove dust or contaminants around

power plug pins or wall outlets.

- This may cause a fire.

 To turn off the main power, remove

the power plug, which should be

positioned so it is easy to access for

operation.

CAUTION

 Hold the plug firmly when unplug-

ging.

- A broken wire in the cord may

cause a fire.

 Ensure the power cord or plug is not

damaged, modified, severely bent,

twisted, pulled, sandwiched or heated.

Do not use a loose wall outlet.

- This may cause a fire or an electric

shock.

 Keep the power cord away from any

heating devices.

- The cord coating may melt and

cause an electric shock.

 Place the projector where people will

not trip over or tread on the power

cord or plug to protect the power

cord and plug from any damage.

- This may cause a fire hazard or an

electric shock.

 Do not turn the projector on or off by

plugging in the power plug or un-

plugging it from the wall outlet.

(Do not use the power plug as a

switch.)

- This may cause an electric shock or

damage to the projector.

 Do not insert a conductor into the

other side of the wall outlet while the

power plug is inserted into the wall

outlet.

In addition, do not touch the power

plug immediately after it is discon-

nected from the wall outlet.

- This may cause an electric shock.

 Use only the official power cord which

is provided by your dealer. Do not use

other power cords.

- This may cause a fire or an electric

shock.

6SAFETY INSTRUCTIONS

When in Use

WARNING

 Do not place anything containing

liquid, such as a vase, flowerpot, cup,

cosmetics, chemicals, decorations or

candles, etc., on top of the projector.

- Possible fire, electric shock, or fall-

ing may cause physical injury.

 In the event that there is a big impact

to the projector or the cabinet is

damaged, switch it off, unplug it from

the wall outlet and contact an authorized

Service Center.

- Otherwise, this may cause a fire or

an electric shock.

 Do not insert pieces of metal such as

coins, hairpins or metal debris, nor

flammable materials such as paper or

matches into the projector.

- This may cause a fire or an electric

shock.

 In the event that liquid or a foreign

object falls into the projector, please

switch it off and unplug it from the

wall outlet and contact an authorized

Service Center.

- Otherwise, this may cause a fire or

an electric shock.

 When replacing a battery of the re-

mote control, make sure a child does

not swallow the battery. Keep the bat-

tery out of reach of children.

- In the case of a battery being swal-

lowed by a child, please consult a

doctor immediately.

 Do not remove any covers except for

the lens cap. There is a high risk of

electric shock.

 Do not look directly into the lens

when the projector is in use. The

strong light may damage your eyes.

 When the lamp is on or has just been

turned off, avoid touching the air vent

or lamp because these will be very

hot.

 If there is a gas leak, do not touch

the wall outlet. Open the window for

ventilation.

- A spark may cause a fire or burn.

 Never touch the projector or power

cord during thunder or lightning.

- This may cause an electric shock.

 Do not use the projector near an

electronic device which generates a

strong magnetic field.

 Store the vinyl envelope used to pack

the projector in a safe place away

from children.

- It could cause suffocation if used

improperly.

 Do not use 3D glasses if you do not

watch 3D.

 Do not keep your hand on the projec-

tor for a long time when it is running.

 When you play a game by connecting

a game console to a projector, it is

recommended that you maintain a

distance of more than four times the

diagonal length of the screen.

 Make sure that the length of

connecting cable is long enough.

Otherwise, the product may fall

causing personal injury or damage to

the product.

SAFETY INSTRUCTIONS

CAUTION

 Do not place a heavy object on the

projector.

- It may fall down and cause physical

injury.

 Be careful to prevent the lens from

heavy impact during transportation.

 Do not touch the lens.

The lens may be damaged.

 Do not use any sharp tools on the

projector such as a knife or hammer,

because this may damage the casing.

 In the event that no image appears

on the screen, switch the projector

off, unplug it from the wall outlet and

contact an authorized Service Center.

- Otherwise, this may cause a fire or

an electric shock.

 Do not drop an object onto the pro-

jector or apply heavy pressure to it.

- This may cause injury to persons or

damage to the projector.

 The distance between your eyes and

the screen must be around 5 - 7 times

the diagonal length of the screen.

- If you watch the screen at a close

distance for a long time, your eye

sight may become worse.

Cleaning

WARNING

 Do not spray the projector with water

when cleaning. Do not allow water to

go into the projector or do not allow it

to get wet.

- This may cause a fire or an electric

shock.

 When there is smoke or a strange

smell coming out from the projector

or a foreign object falls into the pro-

jector, please switch it off and unplug

it from the power outlet and contact

your dealer or Service Center.

- If not, this may cause a fire or an

electric shock.

 Use an air spray or soft cloth or

cotton swab moistened with a lens

cleaning chemical or alcohol to

remove dust or stains on the front

projection lens.

8SAFETY INSTRUCTIONS

CAUTION

 Contact your seller or the Service

Center once a year to clean the inter-

nal parts of the projector.

- If you do not clean the contaminat-

ed interior of the projector for a long

time, there may be a fire or damage

to the projector.

 When cleaning plastic parts such as

the projector case, unplug the power

first and wipe with a soft cloth. Do

not spray with water or wipe with a

wet cloth. When cleaning the plastic

parts, such as the projector case,

do not use cleanser, automobile or

industrial shiner, abrasive or wax, ben-

zene, alcohol, etc., which can damage

the product.

- This can cause fire, electric shock or

product damage (deformation, cor-

rosion and damage).

OTHERS

WARNING

 Only a qualified technician can disas-

semble or modify the projector. For

inspection, adjustment, or repair, con-

tact your seller or the Service Center.

- Otherwise, this may cause a fire or

an electric shock.

 Dispose of the used battery properly.

- Otherwise, this may result in

explosion or fire.

 The correct method of disposal may

vary depending on your country

or region. Dispose of the battery

pack according to the appropriate

instructions.

 Do not throw or disassemble the

battery.

- Otherwise, this may result in fire or

explosion due to damage to the

battery.

 Always use batteries approved and

certified by your dealer or Service

Center.

- Otherwise, this may result in fire or

explosion.

 Store the battery away from metallic

objects, such as keys and paper clips.

 Excess current may cause a rapid

increase in temperature, resulting in

fire or burns.

 Do not store the battery near any

heat source, such as a heater.

- This may result in fire or damage

the product.

 Do not store it at temperatures higher

than 60 °C or in high humidity.

SAFETY INSTRUCTIONS

 Keep the battery out of reach of chil-

dren.

- This may result in personal injury or

damage to the product.

 Make sure that the battery is installed

correctly.

 Incorrect battery replacement may

cause fire.

 Do not stare directly into lens when in

operation, eye damage can occure.

 No user serviceable parts inside unit.

High voltage parts can cause shock

and even electrocution. Please see

owner's manual for service specifica-

tions.

 Proper ventilation required, do not

block airflow around unit. Doing so

can cause injury and internal over-

heating.

 To prevent damage to lamp, unit

must remain plugged in for approxi-

mately 3 minutes after power down

to allow for proper cool down (not

applicable on LED models).

 Do not touch the lens; doing so can

result in burns or damage to lens.

Lens and unit may be HOT during

and immediately after use. Use cau-

tion when handling unit, allowing for

proper cool down.

 Only use a grounded electrical outlet.

 Do not insert anything into or cover

up the exhaust vents.

 Follow all maintenance guidelines for

optimal use; service only at an autho-

rized service center.

 Lamp contains mercury and as such

must be disposed of according to

local, state and federal laws

 (not applicable on LED models).

CAUTION

 Unplug the power cord if the projector

is not used for a long period.

- Accumulated dust may cause

overheating, an electric shock from

corroded insulation and a fire from an

electrical surge.

 Only use the specified type of battery.

- Otherwise, this may cause an elec-

tric shock caused by overheating

and leakage.

 Make sure you use the same type of

battery when replacing.

(Battery CR2032/3V)

- In the case of a battery contact

failure, the battery may drain quickly

or the remote control may not work

properly.

10 SAFETY INSTRUCTIONS

1) this device may not cause harmful

interference, and 2) this device must

accept any interference received,

including interference that may cause

undesired operation of the device of the

device.

FCC NOTICE

Warning - Class B

(b) For a Class B Digital device or

peripheral, the instructions furnished

the user shall include the following or

similar statement, placed in a prominent

location in the text of the manual:

NOTE: This equipment has been

tested and found to comply with the

limits for a Class B digital device,

pursuant to part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and

can radiate radio frequency energy and,

if not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio

or television reception, which can be

determined by turning the equipment

off and on, the user is encouraged to

try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving

antenna.

- Increase the separation between the

equipment and receiver.

- Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced

radio/TV technician for help.

Andere Handbücher für LED 500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Projektor Handbücher

LG PH150G Bedienungsanleitung

LG BX324 Installations- und Betriebshandbuch

LG CF181D Bedienungsanleitung

LG PF85U Bedienungsanleitung

LG ProBeam BF50RG Bedienungsanleitung

LG RD-JT30 Bedienungsanleitung

LG CineBeam Laser 4K Bedienungsanleitung

LG ProBeam BU70QGA Bedienungsanleitung

LG CineBeam Laser 4K Bedienungsanleitung

LG CineBeam PF50KS Bedienungsanleitung

LG HF80LA Bedienungsanleitung

LG Minibeam Pro PF1500G Bedienungsanleitung

LG Minibeam Pro PF1500 Bedienungsanleitung

LG BU50NST Bedienungsanleitung

LG PB63U Bedienungsanleitung

LG MiniBeam UST PH450UG Bedienungsanleitung

LG MiniBeam PW1510G Bedienungsanleitung

LG HX350T Bedienungsanleitung

LG PH30JG Gebrauchsanweisung

LG Minibeam PW800 Bedienungsanleitung

LG PB61U Bedienungsanleitung

LG CineBeam PH150GX Bedienungsanleitung

LG DX130 Bedienungsanleitung

LG Minibeam Pro PF1500W Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung