LG PB63U Bedienungsanleitung

Owner's Manual

DLP PROJECTOR

PB63U

Please read this manual carefully before operating

your projector and retain it for future reference.

www.lg.com

2LICENSES

This device meets the EMC requirements for home appliances (Class B) and is

intended for home usage. This device can be used in all regions.

LICENSES

Supported licenses may differ by model. For more information about licenses,

visit www.lg.com.

Manufactured under license from Dolby Laboratories.

“Dolby “and the double-D symbol are trademarks of Dolby

Laboratories.

ABOUT DIVX VIDEO: DivX®is a digital video format created

by DivX, LLC, a subsidiary of Rovi Corporation. . This is an

ofﬁcial DivX Certiﬁed®device that plays DivX video. Visit divx.

com for more information and software tools to convert your

ﬁles into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed®

device must be registered in order to play purchased DivX

Video-on-Demand (VOD) movies. To obtain your registration

code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete

your registration.

“DivX Certiﬁed®to play DivX®video up to HD 1080p,

including premium content.”

“DivX®, DivX Certiﬁed®and associated logos are trademarks

of Rovi Corporation or its subsidiaries and are used under

license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface,

and the HDMI logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

NOTE

yImage shown may differ from your projector.

yYour projector’s OSD (On Screen Display) may differ slightly from that shown in

this manual.

SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Indoor Installation

WARNING

yDo not place the projector in direct

sunlight or near heat sources such as

radiators, fires, stoves, etc.

- This may cause a fire.

yDo not place flammable materials

such as aerosols near the projector.

- This may cause a fire.

yDo not allow your children to cling to

or climb up to the projector.

- The projector may fall down and

cause personal injury or death.

yDo not place the projector directly on

a carpet, rug or place where ventila-

tion is restricted such as a book shelf

or closet.

- This may cause the projector's in-

ternal temperature to rise and cause

a fire.

yDo not place the projector close to

sources of steam or oil such as a

humidifier or kitchen counter.

- This may cause a fire hazard or an

electric shock.

SAFETY INSTRUCTIONS

Please take note of the safety instructions to prevent any potential accident

or misuse of the projector.

ySafety precautions are given in two forms, i.e. Warning and Caution as detailed below.

WARNING:

Failure to follow the instructions may cause serious injury and even death.

CAUTION:

Failure to follow the instructions may cause injury to persons or damage

to the product.

yRead the owner's manual carefully and keep it to hand.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning ﬂash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user

to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufﬁcient magnitude to constitute a

risk of electric shock to persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within

an equilateral triangle is

intended to alert the user to

the presence of important

operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

4SAFETY INSTRUCTIONS

yDo not place the projector where it

might be exposed to excessive dust.

- This may cause a fire.

yDo not use the projector in a damp

place such as a bathroom where it is

likely to get wet.

- This may cause a fire or an electric

shock.

yDo not allow a tablecloth or curtain to

block the vents.

- This may cause the internal tem-

perature of the projector to rise and

cause a fire.

yThe distance between the projector

and the wall should be more than 30

cm for ventilation purposes.

- Otherwise, this may cause the inter-

nal temperature of the projector to

rise and cause a fire.

CAUTION

yWhen installing the projector on a

table, be careful not to place it near

the edge.

- The projector may fall causing injury

to persons or damage to the projec-

tor. Make sure that you use a stand

suitable for the size of projector.

yTurn off the projector, disconnect the

power supply and remove all connec

tions before moving the projector.

- A damaged cord may cause a fire

or an electric shock.

yDo not install the projector on an

unstable or vibrating surface such as

a vibrating shelf or tilted surface.

- It may fall and cause injury.

yBe careful not to tip the projector over

when connecting external devices to

the projector.

- This may cause injury to persons or

damage to the projector.

Power

WARNING

yThe earth wire should be connected.

- Inappropriate earth grounding may

cause damage to the projector or

an electric shock when there is an

electrical surge.

If the projector must be installed at

a place where earth grounding is not

possible, purchase a circuit breaker

and connect the projector to its wall

outlet.

Do not ground the projector to the

gas pipe, water pipe, lightning rod,

or telephone line, etc.

yThe power plug should be fully insert-

ed into the wall outlet.

- Unstable connection may cause a

fire.

yDo not place heavy objects on the

power cord or place the cord under-

neath the projector.

- This may cause a fire or an electric

shock.

yNever touch the power plug with a

wet hand.

- This may cause an electric shock.

yDo not connect too many devices to

the same power extension.

- Overheating may cause a fire.

yRemove dust or contaminants around

power plug pins or wall outlets.

- This may cause a fire.

yTo turn off the main power, remove

the power plug, which should be

positioned so it is easy to access for

operation.

SAFETY INSTRUCTIONS

CAUTION

yHold the plug firmly when unplug-

ging.

- A broken wire in the cord may

cause a fire.

yEnsure the power cord or plug is not

damaged, modified, severely bent,

twisted, pulled, sandwiched or heated.

Do not use a loose wall outlet.

- This may cause a fire or an electric

shock.

yKeep the power cord away from any

heating devices.

- The cord coating may melt and

cause an electric shock.

yPlace the projector where people will

not trip over or tread on the power

cord or plug to protect the power

cord and plug from any damage.

- This may cause a fire hazard or an

electric shock.

yDo not turn the projector on or off by

plugging in the power plug or un-

plugging it from the wall outlet.

(Do not use the power plug as a

switch.)

- This may cause an electric shock or

damage to the projector.

yDo not insert a conductor into the

other side of the wall outlet while the

power plug is inserted into the wall

outlet.

In addition, do not touch the power

plug immediately after it is discon-

nected from the wall outlet.

- This may cause an electric shock.

yUse only the official power cord which

is provided by LG Electronics, Inc. Do

not use other power cords.

- This may cause a fire or an electric

shock.

When in Use

WARNING

yDo not place anything containing

liquid, such as a vase, flowerpot, cup,

cosmetics, chemicals, decorations or

candles, etc., on top of the projector.

- Possible fire, electric shock, or fall-

ing may cause physical injury.

yIn the event that there is a big im-

pact to the projector or the cabinet is

damaged, switch it off, unplug it from

the wall outlet and contact an autho-

rized service center.

- Otherwise, this may cause a fire or

an electric shock.

yDo not insert pieces of metal such as

coins, hairpins or metal debris, nor

flammable materials such as paper or

matches into the projector.

- This may cause a fire or an electric

shock.

yIn the event that liquid or a foreign

object falls into the projector, please

switch it off and unplug it from the

wall outlet and contact an LG Elec-

tronics Service Center.

- Otherwise, this may cause a fire or

an electric shock.

yWhen replacing a battery of the re-

mote control, make sure a child does

not swallow the battery. Keep the bat-

tery out of reach of children.

- In the case of a battery being swal-

lowed by a child, please consult a

doctor immediately.

yNever open any cover on the projector.

There is a high risk of electric shock.

6SAFETY INSTRUCTIONS

yDo not look directly into the lens

when the projector is in use. The

strong light may damage your eyes.

yWhen the lamp is on or has just been

turned off, avoid touching the air vent

or lamp because these will be very

hot.

yIf there is a gas leak, do not touch

the wall outlet. Open the window for

ventilation.

- A spark may cause a fire or burn.

yNever touch the projector or power

cord during thunder or lightning.

- This may cause an electric shock.

yDo not use the projector near an

electronic device which generates a

strong magnetic field.

yStore the vinyl envelope used to pack

the projector in a safe place away

from children.

- It could cause suffocation if used

improperly.

yDo not use 3D glasses if you do not

watch 3D.

yDo not keep your hand on the projec-

tor for a long time when it is running.

yWhen you play a game by connecting

a game console to a projector, it is

recommended that you maintain a

distance of more than four times the

diagonal length of the screen.

yMake sure that the length of

connecting cable is long enough.

Otherwise, the product may fall

causing personal injury or damage to

the product.

CAUTION

yDo not place a heavy object on the

projector.

- It may fall down and cause physical

injury.

yBe careful to prevent the lens from

heavy impact during transportation.

yDo not touch the lens.

The lens may be damaged.

yDo not use any sharp tools on the

projector such as a knife or hammer,

because this may damage the casing.

yIn the event that no image appears

on the screen, switch the projector

off, unplug it from the wall outlet and

contact an authorized service center.

- Otherwise, this may cause a fire or

an electric shock.

yDo not drop an object onto the pro-

jector or apply heavy pressure to it.

- This may cause injury to persons or

damage to the projector.

yThe distance between your eyes

and the screen must be around 5 -

7 times the diagonal length of the

screen.

- If you watch the screen at a close

distance for a long time, your eye

sight may become worse.

SAFETY INSTRUCTIONS

Cleaning

WARNING

yDo not spray the projector with water

when cleaning. Do not allow water to

go into the projector or do not allow it

to get wet.

- This may cause a fire or an electric

shock.

yWhen there is smoke or a strange

smell coming out from the projector

or a foreign object falls into the pro-

jector, please switch it off and unplug

it from the power outlet and contact

an LG Electronics Service Center.

- If not, this may cause a fire or an

electric shock.

yUse an air spray or soft cloth or

cotton swab moistened with a lens

cleaning chemical or alcohol to

remove dust or stains on the front

projection lens.

CAUTION

yContact your seller or the Service

Center once a year to clean the inter-

nal parts of the projector.

- If you do not clean the contaminat-

ed interior of the projector for a long

time, there may be a fire or damage

to the projector.

yWhen cleaning plastic parts such as

the projector case, unplug the power

first and wipe with a soft cloth. Do

not spray with water or wipe with a

wet cloth. When cleaning the plastic

parts, such as the projector case,

do not use cleanser, automobile or

industrial shiner, abrasive or wax, ben-

zene, alcohol, etc., which can damage

the product.

- This can cause fire, electric shock or

product damage (deformation, cor-

rosion and damage).

8SAFETY INSTRUCTIONS

OTHERS

WARNING

yOnly a qualified technician can disas-

semble or modify the projector. For

inspection, adjustment, or repair, con-

tact your seller or the Service Center.

- Otherwise, this may cause a fire or

an electric shock.

yDispose of the used battery properly.

- Otherwise, this may result in

explosion or fire.

yThe correct method of disposal may

vary depending on your country

or region. Dispose of the battery

pack according to the appropriate

instructions.

yDo not throw or disassemble the

battery.

-Otherwise, this may result in fire or

explosion due to damage to the

battery.

yAlways use batteries approved and

certified by LG Electronics.

- Otherwise, this may result in fire or

explosion.

yStore the battery away from metallic

objects, such as keys and paper clips.

yExcess current may cause a rapid

increase in temperature, resulting in

fire or burns.

yDo not store the battery near any

heat source, such as a heater.

- This may result in fire or damage

the product.

yDo not store it at temperatures higher

than 60 °C or in high humidity.

yKeep the battery out of reach of chil-

dren.

- This may result in personal injury or

damage to the product.

yMake sure that the battery is installed

correctly.

yIncorrect battery replacement may

cause fire.

CAUTION

yUnplug the power cord if the projec-

tor is not used for a long period.

- Accumulated dust may cause

overheating, an electric shock from

corroded insulation and a fire from an

electrical surge.

yOnly use the specified type of battery.

- Otherwise, this may cause an elec-

tric shock caused by overheating

and leakage.

yMake sure you use the same type

of battery when replacing. (Battery

CR2032/3V)

- In the case of a battery contact

failure, the battery may drain quickly

or the remote control may not work

properly.

SAFETY INSTRUCTIONS

ANTENNA

Outdoor Antenna Grounding

yIf an outdoor antenna is installed,

follow the precautions below. An

outdoor antenna system should not

be located in the vicinity of overhead

power lines or other electric light or

power circuits, or where it can come

in contact with such power lines or

circuits as death or serious injury can

occur. Be sure the antenna system

is grounded so as to provide some

protection against voltage surges and

built-up static charges. Section 810

of the National Electrical Code (NEC)

in the U.S.A. provides information

with respect to proper grounding of

the mast and supporting structure,

grounding of the lead-in wire to

an antenna discharge unit, size of

grounding conductors, location of

antenna discharge unit, connection

to grounding electrodes and

requirements for the grounding

electrode.

Antenna grounding according to the

National Electrical Code, ANSI/NFPA

Antenna Lead in Wire

Grounding Conductor

(NEC Section 810-21)

Antenna Discharge Unit

(NEC Section 810-20)

Power Service

GroundingElectrode

System (NEC Art 250,

Part H)

NEC: National Electrical Code

Ground Clamp

Electric Service

Equipment

Ground Clamp

For USA

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the

CATV system installer’s attention to

Article 820 - 40 of the National Electric

Code (U.S.A.). The code provides

guidelines for proper grounding and,

in particular, speciﬁes that the cable

ground shall be connected to the

grounding system of the building, as

close to the point of the cable entry as

practical.

10 SAFETY INSTRUCTIONS

FCC NOTICE

Federal Communications Commission

(FCC) Statement

You are cautioned that changes or

modiﬁcations not expressly approved

by the part responsible for compliance

could void the user’s authority to

operate the equipment.

This equipment has been tested and

found to comply with the limits for

a Class B digital device, pursuant to

part 15 of the FCC rules. These limits

are designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio

or television reception, which can be

determined by turning the equipment

off and on, the user is encouraged to

try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving

antenna.

- Increase the separation between the

equipment and receiver.

- Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced

radio/projector technician for help.

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions:

1) This device may not cause harmful

interference, and

2) This device must accept any

interference received, including

interference that may cause

undesired operation of the device of

the device.

Andere Handbücher für PB63U

Inhaltsverzeichnis

Andere LG Projektor Handbücher

LG HS201 - LED Projector Slim Line Design Just 1.8... Bedienungsanleitung

LG AN110B Bedienungsanleitung

LG HX300G Bedienungsanleitung

LG HECTO Bedienungsanleitung

LG PB63G Bedienungsanleitung

LG CineBeam Al ThinQ HU710PW Bedienungsanleitung

LG PF85U Bedienungsanleitung

LG CineBeam Laser 4K HU80KS Bedienungsanleitung

LG MiniBeam PH150B Bedienungsanleitung

LG PA1000 Bedienungsanleitung

LG BS275 Installations- und Betriebshandbuch

LG HF60LS Bedienungsanleitung

LG CineBeam HF65LA Bedienungsanleitung

LG Minibeam PW800 Bedienungsanleitung

LG PW700 Bedienungsanleitung

LG BX220-JD Bedienungsanleitung

LG HU715QW -GL Bedienungsanleitung

LG HF80J Bedienungsanleitung

LG CineBeam HU715QW Bedienungsanleitung

LG RL-JA20 Bedienungsanleitung

LG PF1000UW Bedienungsanleitung

LG CineBeam HU915QB Bedienungsanleitung

LG PA1000T Bedienungsanleitung

LG HS101 Handbuch

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung