LG LSC27918 series Bedienungsanleitung

REFRIGERATOR

REFRIGERADOR

LSC27918**

Owner´s Manual

website: http://us.lge.com

1-800-243-0000

24 HOURSADAY, 7 DAYSAWEEK FOR LG CUSTOMER SERVICE

para el servicio LG (Atención al Cliente) 24 horas al día, 7 días a la semana

Entry

Important Safety Instruction

Identification of Parts

Where to Install

Door Removal

Door Replacement

Water Pipe Installation

Water Connection Instruction Guide

Operation Instruction Guide

Height Adjustment

Starting

Adjusting the Temperatures and functions

(Dispenser/Automatic Icemaker)

Shelf

Location of Foods

Storing Foods

How to Dismantle Parts

General Information

Cleaning

Troubleshooting

Table of Contents

Introduction

Installation

Operation

Suggestion on

Food Storage

Care and

Maintenance

Introduction

the

If you are getting rid of your old refrigerator, please follow

the instructions at right to help prevent accidents.

Introduction

IdentiﬁcationofParts

•

If you nd some parts missing from your unit,

they may be parts only used in other models.

Where to install

Unstable installation may cause vibration and

noise. If the oor to install the refrigerator on

is not even, make the refrigerator level by

rotating the height adjusting screw. Carpet

or oor covering on which a refrigerator is

installed may be discolored by heat from the

bottom of the refrigerator.

If our refrigerator causes this kind of

damage, there is something wrong with it.

Customers will not stand for this.

Strong

and even ﬂoor

A proper

distance from

adjacent items

Please keep the refrigerator at a proper

distance from other things. Too small a

distance from adjacent items may result in

lowered freezing capability and increased

electricity consumption charges .

2”(5.08 cm)

Installation

Where water

supply can be

easily connected

in a dry place

Where it is free

from heat

Select a place where a water supply can be

easily connected between the automatic ice

maker and dispenser.

Installing the refrigerator in a wet or damp

area may cause rust and may be an electrical

hazard.

If this refrigerator is installed where the

ambient temperature is high, the freezing

capacity is deteriorated and the cost of

electricity used increases.

•

Install the refrigerator at a place where the ambient temperature is 5˚C ~ 43˚C

(41˚F~110˚F).

Ambient temperature outside this range may cause product malfunction. Also, the

tube between the dispenser and automatic ice maker may freeze.

NOTE

Bottom Pad

Tools Required

Door removal

Failure to do so could result in death or serious injury.

If your entrance door is too narrow for the

refrigerator to pass through, remove the

refrigerator door and pass the refrigerator laterally.

Electric Shock Hazard

Disconnect electrical supply to refrigerator before installing.

Remove the lower cover by lifting upward, and

then pull up the water feed tubes while pressing

area shown in the to the right.

Remove Lower

Cover and

Water Feed Tube

WARNING

Remove the

Freezer

Compartment

Door

Remove the

Refrigerator

Door

Installation

1) Remove the hinge cover by loosening the

screws. Disconnect all connections except

the ground line.

2) Remove the keeper by rotating it counter

clockwise and then lifting the upper

hinge up

3) Remove the freezer compartment door by

lifting it upward. This time, the door should

be lifted enough for the water feed tube to

be completely pulled out.

1) Loosen the hinge cover screws and remove

the cover. Remove connection wire.

2) Remove keeper by rotating it clockwise

and then remove the upper hinge by lifting

it up .

3) Remove the refrigerator compartment door

by lifting it up.

•

If a tube end is deformed or abraded, trim the part away.

Disconnecting the tube under the door causes about 1.5 litters water to out. Please

put a large container at end of tube to prevent water from draining on to the .

NOTE

•

When removing the upper hinge, be careful that the door does not fall forward .

NOTE

•

After removing the door, take it into the kitchen where you are installing the

refrigerator. Lay it down on a blanket and be careful to avoid damaging the water

feed tube.

NOTE

Lower Cover

Lower hinge

Lower Hinge

Keeper

Water Feed Tube

Connection

Wires

Connection

Wires

Hinge

Cover

Upper Hinge

Keeper Upper Hinge

Door replacement

Feed water tube installation

Push the refrigerator sideways through the

entrance door as shown in the right picture.

Automatic icemaker operation needs water pressure of 21.3~121psi(lb/inch2) (That

is, a 7oz. paper cup will be lled within 3 sec.).

If water pressure does not reach the rated 21.3psi(lb/inch2) or below, it is necessary

to purchase a separate pressure pump for normal automatic icemaking and cool

water feed.

Keep the total length of the water feed tube within 40 feet and be careful not to

bend or kink the tube. If the tube is longer than 40 feet, the icemaker and water

dispenser will not operate properly.

Install the water feed tube at a place free from heat.

Connect to potable water supply only.

Refer to instructions with water lter kit for installation.

Mount the doors in the reverse order of

removal after the refrigerator is brought to

the installation area.

Move the

Refrigerator

Before

Installation

WARNING

Installation

Water Connection Instruction Guide

Read all directions carefully before you begin.

Connecting

the Refrigerator

to a Water Source

•

If operating the refrigerator before installing the water connection, turn icemaker

to theOFF position to prevent operation without water.

•

All installations must be in accordance with local plumbing code requirements.

•

Use copper tubing and check for leaks.

•

Install copper tubing only in areas where temperatures will remain above freezing.

•

It may take up to 24 hours for your icemaker to begin producing ice.

IMPORTANT

Standard screwdriver

7/16-inch and 1/2-inch open-end wrenches or two adjustable wrenches

1/4-inch nut driver

1/4-inch drill bit

Hand drill or electric drill (properly grounded)

Tools Required

•

Your refrigerator dealer has a kit available with a 1/4-inch saddle-type shut-o valve,

a union, and copper tubing. Before purchasing, make sure a saddle-type valve

complies with your local plumbing codes. Do not use a piercing-type or 3/16-inch

saddle valve which reduces water ow and clogs more easily.

NOTE

Screwdriver

Adjustable wrenches

Electric drill

NOTE:

Check the direction of the level hinge.

Correct Incorrect

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn on the nearest faucet to relieve the pressure on the

line. It may help to open an outside faucet to allow the water to drain from the line in

the house.

3. Find a 1/2-inch to 1-1/4-inch vertical COLD water pipe near the refrigerator.

Connect

the Tubing to

Water Line

•

Horizontal pipe will work, but the following precaution must be taken: Drill on the top of the pipe

not the bottom. This will help keep water away from the drill. This also keeps normal sediment

from collecting in the valve.

NOTE

4. To determine the length of copper tubing you will need, measure from the connection

on the lower left rear of the refrigerator to the water pipe. Add 7 feet (2.1m) to allow

for moving refrigerator for cleaning. Use 1/4-inch O.D. (outside diameter) copper

tubing. Be sure both ends of copper tubing are cut square.

5. Using a drill, drill a 1/4-inch hole in the cold water pipe you have selected.

6. Fasten shut-off valve to cold water pipe with pipe clamp. Be sure outlet end is solidly

in the 1/4-inch drilled hole in the water pipe and that the washer is under the pipe

clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so

washer makes a watertight seal. Do not overtighten or you may crush the cooper

tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect

copper tubing.

7. Slip compression sleeve and compression nut on copper tubing as shown. Insert end

of tubing into outlet end squarely as far as it will go. Screw compression nut onto

outlet end with adjustable wrench. Do not over tighten.

8. Place the free end of the tubing into a container or zinc, and turn ON main water

supply and flush out tubing until water is clear. Turn OFF shutoff valve on the water

pipe. Coil the copper tubing as shown below.

Cold Water Pipe

Pipe Clamp

Coil of Polyethylene or

Copper Tubing

Compression Nut

Compression Sleeve

Shut Off Valve

Packing Nut

Installation

Coil of Polyethylene or

1/4" Cooper Tubing

Tubing Clamp

1/4"

Compression

Nut

Ferrule

(sleeve)

Refrigerator Connection

Operation Instruction Guide

Before making the connection to the refrigerator, be sure the refrigerator

power cord is not plugged into the wall outlet.

• If your refrigerator does not

have a water filter, we

recommend installing one. If

your water supply has sand or

particles that could clog the

screen of the refrigerator’s

water valve. Install the filter in

the water line near the

refrigerator.

1. Remove the plastic flexible

cap from the water valve.

2. Place the compression nut and

ferrule (sleeve) onto the end of

the tubing as shown.

3. Insert the end of the copper tubing into the connection as far as possible. While

holding the tubing, tighten the fitting.

Connect the Tubing

to the Refrigerator

Inhaltsverzeichnis

Andere LG Kühlschrank Handbücher

LG LMXS30776S Bedienungsanleitung

LG VT40MPP Bedienungsanleitung

LG LMXC23746S Bedienungsanleitung

LG LSC27910 Series Bedienungsanleitung

LG BOTTOM FREEZER REFRIGERATOR Bedienungsanleitung

LG G A702H Series Bedienungsanleitung

LG LBNC12251V.APZCNA0 Bedienungsanleitung

LG LSC27921 Series Bedienungsanleitung

LG LMX25985ST - 25 Cu. Ft. Bottom Freezer... Bedienungsanleitung

LG GN-Y201SLBB Bedienungsanleitung

LG LFC22770* Bedienungsanleitung

LG GR-P247STSL Bedienungsanleitung

LG LMX25988SB Bedienungsanleitung

LG LMX25981 Series Bedienungsanleitung

LG LFX25992ST Bedienungsanleitung

LG LRBN20512WW Bedienungsanleitung

LG LDN2272 Series Bedienungsanleitung

LG REFRIGERATOR Bedienungsanleitung

LG G-4 Series Bedienungsanleitung

LG GR-B772GSPN Bedienungsanleitung

LG LRMVC1803 Series Bedienungsanleitung

LG GN-B202SLC Bedienungsanleitung

LG GN-B352RQCL Bedienungsanleitung

LG GR-D31FTKHL Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung

Matsui

Matsui MTT50W12E Bedienungsanleitung