LG LK72B Bedienungsanleitung

OWNER’S MANUAL

Multimedia

Speaker System

Please read this manual carefully before operating

your set and retain it for future reference.

MODELS

LK72B (LK72B, LK72B-S)

LK72BE (LK72BE, LK72BE-S)

www.lg.com

1807_Rev02

MFL70428612

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the batteries or the battery

pack from the equipment:

To Remove the old batteries or battery pack, follow

the assembly steps in reverse order. To prevent

contamination of the environment and bring on

possible threat to human and/or animal health, the

old batteries or the battery pack must be put in an

appropriate container at designated collection points.

Do not dispose of batteries or battery pack together

with other waste. It is recommended that you use

local, free reimbursement systems batteries or

battery packs, (may not be available in your area). The

batteries or the battery pack should not be exposed

to excessive heat such as sunshine, re or the like.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information

6 Unique Features

7 Playable file Requirement

7 – Music file requirement

7 – Compatible USB Devices / SD cards

7 – USB device / SD card requirement

8 Remote control

9 Front panel

10 Rear panel

2 Connecting

11 Power Cord Connection

11 Speaker Connection

12 Optional Equipment Connection

12 – AUX IN Connection

12 – PORT. IN Connection

13 – USB Connection

13 – SD card Connection

Table of Contents 5

3 Operating

14 Basic Operations

14 – USB/SD Operations

16 Using BLUETOOTH® wireless technology

16 – Listening to music stored on the Bluetooth

devices

18 Radio Operations

18 – Listening to the radio

18 – Presetting the Radio Stations

18 – Deleting all the saved stations

19 Other Operations

19 – Turn off the sound temporarily

19 – Auto power down

19 – Adjusting Bass level

4 Troubleshooting

20 Troubleshooting

20 – General

5 Appendix

21 General specifications

22 Trademarks and Licenses

22 Maintenance

22 – Handling the Unit

Getting Started6

Getting Started

Unique Features

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Portable In

Listens to music from your portable device. (MP3,

Notebook, etc.)

Getting Started 7

Getting Started

Playable file

Requirement

Music file requirement

MP3 le compatibility with this unit is limited as

follows.

ySampling frequency : within 32 to 44.1 kHz

yBit rate : within 32 to 320 kbps

yMaximum les : 999

yMaximum folders : 999

yFile extensions : “.mp3”

yCertain MP3 les may not be played depending on

the type or format of the le.

Compatible USB Devices / SD

cards

yMP3 Player : Flash type MP3 player.

yUSB Flash Drive :

Devices that support USB2.0 or USB1.1.

ySD card : SD, SDHC, SDXC

yThe USB / SD function of this unit does not

support all USB devices and SD cards.

USB device / SD card

requirement

yDevices which require additional program

installation when you have connected it to a

computer, are not supported.

yDo not extract the USB device / SD card while in

operation.

yFor a large capacity USB or SD card, it may take

longer than a few minute to be searched.

yTo prevent data loss, back up all data.

yIf you use a USB extension cable or USB hub, the

USB device is not recognized.

yUsing NTFS le system is not supported.

(FAT(16 / 32) and ExFAT le systems are

supported.)

yThis unit recognizes up to 999 les.

yExternal HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

yUSB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

ySome USB / SD cards may not work with this unit.

Getting Started8

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert the battery with 4and 5

matched correctly.

• • • • • • • • • • • • • • a• • • • • • • • • • • • •

1(Standby) : Turns the power on or off.

F (Function) : Selects the function and input source.

Input source /

Function Display

USB USb

SD card Sd

AUX input AUdIO

Portable input POrtAbLE

AUdIO

Bluetooth bt

Radio * 87.50

* : Displays current radio frequency.

VOL (Volume) +/- : Adjusts speaker volume.

[(Mute) : Mutes the sound.

REPEAT : Listens to your les repeatedly or

randomly.

BASS +/- : Adjusts bass level.

• • • • • • • • • • • • • • b• • • • • • • • • • • • •

C/V(Skip/Search)

- Skips backward or forward.

- Searches for a section within a le.

N (Play/Pause) : Starts or pauses playback.

TUNING-/+ : Selects the radio stations.

PRESETW/S: Chooses a preset number for a radio

station.

MEMORY : Stores radio stations. (Page 18)

DELETE: Deletes all the saved stations. (Page 18)

? : This button is not available.

Getting Started 9

Getting Started

Front panel

Remote sensor

SD card slot

You can play sound les by connecting the SD

card.

c1(Standby)

Turns the power on or off.

F (Function)

Selects the function and input source.

Input source /

Function Display

USB USb

SD card Sd

AUX input AUdIO

Portable input POrtAbLE

AUdIO

Bluetooth bt

Radio * 87.50

* : Displays current radio frequency.

dVOL (Volume) -/+

Adjusts speaker volume.

C/V(Skip/Search)

- Skips backward or forwards.

- Searches for a section within a le.

- Selects the radio stations.

N(Play/Pause)

Starts or pauses playback.

BASS -/+

Adjusts bass level.

eUSB port

You can play sound les by connecting the USB

device.

PORT. (Portable) IN

Connect a portable device.

fDisplay window

Getting Started10

Getting Started

aAUX IN (L/R)

Connect an auxiliary device.

bFRONT SPEAKERS (FL/FR) connector

cPOWER IN

dFM ANTENNA

Rear panel

Andere Handbücher für LK72B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung