LG SH4D, SPJ4B-W Bedienungsanleitung

MODEL

SH4D (SH4D, SPJ4B-W)

Please read this manual carefully before operating

your set and retain it for future reference.

OWNER’S MANUAL

Wireless

Sound Bar

www.lg.com

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In

case of an emergency, the Power Plug must

remain readily accessible. Check the specication

page of this owner’s manual to be certain of the

current requirements. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged wall

outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

device, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the battery or the battery

pack from the equipment: To remove the old

battery or battery pack, follow the assembly steps

in reverse order. To prevent contamination of the

environment and bring on possible threat to human

and animal health, the old battery or the battery

put it in the appropriate container at designated

collection points. Do not dispose of batteries

or battery pack together with other waste. It is

recommended that you use local, free reimbursement

systems batteries and accumulators. The battery

shall not be exposed to excessive heat such as

sunshine, re or the like.

For models using an adapter

Only use the AC adapter supplied with this device.

Do not use a power supply from another device or

another manufacturer. Using any other power cable

or power supply may cause damage to the device

and void your warranty.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

10 Installing the sound bar

2 Connecting

11 Connecting the AC Adapter

11 Wireless subwoofer connection

13 Connecting to your TV

13 – Using an OPTICAL cable

13 – LG Sound Sync

15 Optional equipment connection

15 – OPTICAL IN connection

3 Operating

16 Operations

16 – Turn off the sound temporarily

16 – Using your TV remote control

16 – Auto power down

17 – AUTO POWER On/Off

18 – Auto function change

19 Using BLUETOOTH® technology

19 – Listening to music stored on the

BLUETOOTH devices

21 Using BLUETOOTH App

21 – Install “Music Flow Bluetooth” App onto

Your BLUETOOTH Device

21 – Activate BLUETOOTH with “Music Flow

Bluetooth” App

23 Sound adjustment

23 – Setting sound effect

23 – Adjust the woofer level settings

23 – Night mode

4 Troubleshooting

24 Troubleshooting

24 – General

25 – NOTES to use wireless

25 – NOTES to release Demo mode

5 Appendix

26 Trademarks and licenses

27 Specifications

29 Maintenance

29 – Handling the unit

Getting Started6

Getting Started

Unique features

Auto power down

This unit will turn off by itself for energy saving

consumption.

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync.

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Remote control

Replacement of Battery

Remove the battery cover on the rear of the remote

control, and insert the battery with and

matched correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Power) : Switches the unit ON or OFF.

F: Selects the function and the input source.

ASC : Analyzes the property of input sound and

provides the sound optimized for the content in real

time.

STANDARD : Selects standardized sound.

CINEMA : Selects cinematic surround sound.

VOL o/p: Adjusts speaker volume.

(Mute) : Mutes the sound.

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

C/V (Skip) : Skips Fast backward or Forward.

dM (Play/Pause) : Starts playback. / Pauses

playback.

You can control Bluetooth device using

C/V (Skip) and dM (Play/Pause) buttons

on the remote control.

, Note

NIGHT ON/OFF :

- Turns on or off Night mode.

- Controls this unit using TV remote. (Page 16)

WOOFER LEVEL o/p: Adjusts sound level of

subwoofer.

AUTO POWER ON/OFF :

- Turns on or off AUTO POWER function. (Page 17)

- Turns on or off the Bluetooth connection lock.

(Page 20)

Getting Started8

Getting Started

A Remote sensor

B Standby LED (Red)

C Function LED (White)

D The buttons are located on the rear.

Front panel

Ao/p (Volume) : Adjusts volume level

F (Function) : Selects the function and input

source.

1/! (Standby/On)

BDC IN : AC adapter input

COPTICAL IN : Optical input

DUSB (Service only) : S/W download connector

Rear panel

Getting Started 9

Getting Started

About LED condition

LED Condition Description

OPTICAL LED turns on. OPTICAL function is selected.

OPTICAL LED blinks twice and

turns on.

LG Sound Sync (Optical) function is

selected.

BT (Bluetooth) LED turns on. Paired with Bluetooth device.

BT (Bluetooth) LED blinks. Waiting for Bluetooth connection.

LG TV LED turns on. LG Sound Sync (Wireless) function is

selected.

yWhen you press any button, standby LED (Red) on the main unit blinks.

yWhen you press (Mute) button, standby LED (Red) blinks slowly.

yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.

yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.

yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.

, Note

Getting Started10

Getting Started

Installing the sound bar

You can hear the sound by connecting the unit to the

other device : TV, Blu-ray disc player, DVD player, etc.

Place the unit in front of the TV and connect it to the

device you want. (Pages 13 - 15)

yFor best performance of wireless connection

such as Bluetooth or wireless subwoofer,

do not install the unit on Metallic furniture

because wireless connection communicates

through a module positioned on the bottom

of the unit.

yBe careful not to make scratches on the

surface of the Unit / Subwoofer when

installing or moving them.

> Caution

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung