LG SJ1 Bedienungsanleitung

OWNER’S MANUAL

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

SJ1

www.lg.com

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and power supply ratings,

please refer to the main label on the bottom or the

other surface of the product.

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery from the

equipment: Remove the old battery or battery pack,

follow the steps in reverse order than the assembly.

To prevent contamination of the environment and

bring on possible threat to human and animal health,

the old battery or the battery put it in the appropriate

container at designated collection points. Do not

dispose of batteries or battery together with other

waste. It is recommended that you use local, free

reimbursement systems batteries and accumulators.

The battery should not be exposed to excessive heat

such as sunshine, re or the like.

For models using an adapter

Only use the AC adapter supplied with this device.

Do not use a power supply from another device or

another manufacturer. Using any other power cable

or power supply may cause damage to the device and

void your warranty.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

The symblo indicates polarity of DC

Power connector.

For indoor use only.

The symbol indicates energy effeciency

marking with level Ⅵ

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

10 Installing the sound bar

11 Mounting the main unit on a wall (Optional)

2 Connecting

13 Connecting the AC Adapter

13 Connecting to your TV

13 – Using an OPTICAL cable

14 Optional equipment connection

14 – OPTICAL IN connection

14 – PORT. IN connection

3 Operating

15 Operations

15 – DRC (Dynamic Range Control)

15 – Turn off the sound temporarily

15 – Using your TV remote control

15 – Auto power down

16 – AUTO POWER On/Off

16 – Auto function change

17 Using BLUETOOTH® technology

17 – Listening to music stored on the Bluetooth

devices

19 Sound adjustment

4 Troubleshooting

20 Troubleshooting

20 – General

21 – NOTES to use wireless

5 Appendix

22 Trademarks and licenses

23 Specifications

24 Maintenance

24 – Handling the unit

Getting Started6

Getting Started

Unique features

Auto power down

This unit supports to turn off by itself for saving

energy consumption.

Portable In

Listen to music from your portable device.

(MP3 player, Notebook, Smart phone, etc..)

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert battery with and matched

correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Power) : Switches the unit ON or OFF

STANDARD : Selects standardized sound.

BASS BLAST: Reinforces the treble, bass and

surround sound effect.

OPTICAL : Selects the optical function and source.

j(Bluetooth) : Selects the Bluethooth function and

source.

PORT.IN (Portable in): Selects the portable function

and source.

VOL o/p: Adjusts speaker volume.

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

DRC ON/OFF :

- Turns on or off DRC function.

(Page :15.)

- Controls this unit using TV remote.

(Page :15.)

(Mute) : Mutes the sound.

AUTO POWER ON/OFF :

- Turns on or off AUTO POWER function.

(Page :16.)

- Turns on or off the Bluetooth connection lock

function. (Page :18.)

?: This button is not used.

Getting Started8

Getting Started

A1 (Standby/Standby LED)

- Switches to power on or standby mode.

- Standby LED lights up in red on standby mode.

Bp/o (Volume)

Adjusts volume level.

CF (Function)

Selects the function and input source.

DOPTICAL LED

Ej(Bluetooth) LED

FPORTABLE LED

G Remote sensor

H Speakers

Front panel

Rear panel

APORTABLE IN : Portable input

BOPTICAL IN : Optical input

CDC IN : AC adapter input

DPassive Radiator : Make the bass sound

improved

EWall mount hole : You can mount the sound bar

on a wall. (page : 11-12)

A B C

D E F

H H

CDE ED

Getting Started 9

Getting Started

About LED condition

LED Condition Description

OPTICAL LED turns on. OPTICAL function is selected.

j(Bluetooth) LED turns on. Paired with Bluetooth device.

j(Bluetooth)LED blinks. Waiting for Bluetooth connection.

PORTABLE LED turns on. PORTABLE function is selected.

yWhen you press any button, standby LED (Red) on the main unit blinks.

yWhen you press (Mute) button, standby LED (Red) blinks slowly.

yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.

yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.

yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.

, Note

Getting Started10

Getting Started

Installing the sound bar

You can hear the sound by connecting the unit to the

other device : TV, Blu-ray disc player, DVD player, etc.

Place the unit in front of the TV and connect it to the

device you want. (Page : 13)

yFor best performance of wireless connection

such as Bluetooth do not install the unit on

Metallic furniture because wireless connection

communicates through a module positioned

on the bottom of the unit.

yBe careful not to make scratches on the

surface of the unit when installing or moving

them.

yUse caution when handling this unit.

The speaker on the rear is exposed. Avoid

making contact with the exposed speaker.

> Caution

Andere Handbücher für SJ1

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung