LG SJ4R Bedienungsanleitung
OWNER’S MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
SJ4R (SJ4R, SPJ4B-W), SPJ4-S (SPJ4-S, S65S3-S)
Copyright © 2017 LG Electronics Inc. All Rights Reserved
www.lg.com
*MFL70205209*
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
This device is equipped with a portable battery or
accumulator.
How to Safely remove the battery or the battery
pack from the equipment:
To remove the old battery or battery pack, follow
the assembly steps in reverse order. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do not
dispose of batteries or battery pack together
with other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
For models using an adapter
Only use the AC adapter supplied with this device.
Do not use a power supply from another device or
another manufacturer. Using any other power cable
or power supply may cause damage to the device and
void your warranty.
Getting Started4
Getting Started
1
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping and handling) upon email request
to [email protected]om. This offer is valid for three
(3) years from the date on which you purchased the
product.
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
7 Remote control
8 Front panel
8 Rear panel
9 About LED condition
10 Installing the sound bar
10 Mounting the main unit on a wall
12 Positioning the speakers
2 Connecting
13 Connecting the AC Adapter
13 Wireless subwoofer and rear speaker
connection
13 – Wireless subwoofer connection
15 – Rear speakers connection
16 – Surround sound
17 – How to Affix the Ferrite Core
18 Connecting to your TV
18 – Using an OPTICAL cable
18 – LG Sound Sync
20 – Using an HDMI cable
21 – Additional information for HDMI
22 Optional equipment connection
22 – HDMI connection
23 – OPTICAL IN connection
23 – PORTABLE IN connection
24 – USB connection
24 – Compatible USB devices
24 – USB device requirement
25 – Playable file
3 Operating
26 Basic operations
26 – USB operation
26 Other operations
26 – Turn off the sound temporarily
26 – Using your TV remote control
27 – Auto power down
27 – AUTO POWER On/Off
28 – Auto function change
28 – Quick Start
29 Using BLUETOOTH® technology
29 – Listening to music stored on the
BLUETOOTH devices
31 Using BLUETOOTH App
31 – Install “Music Flow Bluetooth” App onto
Your BLUETOOTH Device
31 – Activate Bluetooth with “Music Flow
Bluetooth” App
33 Sound adjustment
33 – Setting sound effect
33 – Adjust the subwoofer level settings
33 – Adjust the rear speakers level settings
4 Troubleshooting
34 Troubleshooting
34 – General
35 – NOTES to use wireless
36 – NOTES to release Demo mode
5 Appendix
37 Trademarks and licenses
38 Specifications
40 Maintenance
40 – Handling the unit
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit will turn off by itself for energy saving
consumption.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Surround sound
You can enjoy surround sound by using Wireless Rear
Speakers kit. (SPJ4-S)
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started 7
Getting Started
1
Remote control
Replacement of Battery
Remove the battery cover on the rear of the remote
control, and insert the battery with and
matched correctly.
• • • • • • • • • • • • • • a• • • • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
F: Selects the function and the input source.
ASC : Analyzes the property of input sound and
provides the sound optimized for the content in real
time.
BASS BLAST :
- Selects reinforced bass sound.
- Turns on using your tv remote control function
(Refer to the page 26.)
CINEMA :
- Selects cinematic surround sound.
- Turns off using your tv remote control function
(Refer to the page 26.)
VOL o/p: Adjusts speaker volume.
(Mute) : Mutes the sound.
• • • • • • • • • • • • • • b• • • • • • • • • • • • •
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a le.
dM (Play/Pause) : Starts playback. / Pauses playback.
REAR LEVEL o/p:
- Adjusts sound level of rear speakers.
- Turns on or off Surround function. (Refer to the
page 16.)
WOOFER LEVEL o/p: Adjusts sound level of
subwoofer.
AUTO POWER ON/OFF :
- Turns on or off AUTO POWER function. (Refer to
the page 27)
- Turns on or off the Bluetooth connection lock.
(Refer to the page 30.)
Getting Started8
Getting Started
1
A
Remote sensor
B
Standby LED (Red)
C
Function LED (White)
D
The buttons are located on the rear.
Front panel
Ao/p: (Volume) : Adjusts volume level
F (Function) : Selects the function and input
source.
1/! (Standby/On)
BDC IN : AC adapter input
COPTICAL IN : Optical input
DPORTABLE IN : Portable input
EUSB
FHDMI OUT (TV ARC) / IN : HDMI output / input
Rear panel
Getting Started 9
Getting Started
1
About LED condition
LED Condition Description
OPTICAL LED turns on. OPTICAL function is selected.
OPTICAL LED blinks twice and
turns on.
LG sound sync (Optical) function is
selected.
USB LED turns on. USB function is selected.
USB LED blinks. Paused USB playback.
BT (Bluetooth) LED turns on. Paired with Bluetooth device.
BT (Bluetooth) LED blinks. Waiting for Bluetooth connection.
LG TV LED turns on. LG Sound Sync (Wireless) function is
selected.
HDMI IN LED turns on. HDMI IN function is selected.
LG TV and HDMI IN LEDs turn
on. PORTABLE function is selected.
USB and BT (Bluetooth) LEDs
turn on. ARC function is selected
yWhen you press any button, standby LED (Red) on the main unit blinks.
yWhen you press (Mute) button, standby LED (Red) blinks slowly.
yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.
yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.
yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.
, Note
Getting Started10
Getting Started
1
Installing the sound bar
You can hear the sound by connecting the unit to the
other device : TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the
device you want. (Refer to pages 18 - 25.)
yFor best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yBe careful not to make scratches on the
surface of the Unit / Subwoofer when
installing or moving them.
> Caution
Mounting the main unit
on a wall
You can mount the main unit on a wall.
Because it is difcult to make a connection after
installing this unit, you should connect the cables
before installation.
> Caution
Preparation materials
Unit
Wall bracket install guide
Screws
Screws (A)
Wall plug
Wall brackets
(Not supplied)
Andere Handbücher für SJ4R
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere LG Lautsprechersystem Handbücher
LG
LG SL8YG Bedienungsanleitung
LG
LG MUSIC flow HS6 Bedienungsanleitung
LG
LG NB3532A Bedienungsanleitung
LG
LG MUSIC FLOW LAC850M HS7 Bedienungsanleitung
LG
LG LK72B Technisches Datenblatt
LG
LG SN6Y Technisches Datenblatt
LG
LG RN5 Technisches Datenblatt
LG
LG DSN5Y Technisches Datenblatt
LG
LG SP2 Bedienungsanleitung
LG
LG S80QR Bedienungsanleitung
LG
LG BB5535K Bedienungsanleitung
LG
LG MusicFlow DSH8 Bedienungsanleitung
LG
LG SN8YG Bedienungsanleitung
LG
LG GX Bedienungsanleitung
LG
LG SPP11M-SR Technisches Datenblatt
LG
LG GX Bedienungsanleitung
LG
LG NB5540 Technisches Datenblatt
LG
LG SNC5A Technisches Datenblatt
LG
LG SK1D Technisches Datenblatt
LG
LG SJ3 (SJ3, SPJ4B-W) Bedienungsanleitung
Beliebte Lautsprechersystem Handbücher anderer Marken
JVC
JVC NX-PN7 Bedienungsanleitung
Marshall Amplification
Marshall Amplification AR-DM61-BT Bedienungsanleitung
Yamaha
Yamaha NX-A01 - Speaker Sys Bedienungsanleitung
SE Audiotechnik
SE Audiotechnik I-LINE Bedienungsanleitung
Gemini
Gemini WRX-843 Series Bedienungsanleitung
TCL
TCL 6100 Series Bedienungsanleitung