LG SK3D Bedienungsanleitung

OWNER’S MANUAL

Wireless

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

SK3D (SK3D, SPH4B-W)

www.lg.com

MFL69681811

1 Getting Started

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The device shall not be exposed to water

(dripping or splashing) and no objects lled with

liquids, such as vases, shall be placed on the device.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the device.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and power supply ratings,

please refer to the main label on the bottom or the

other surface of the product.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the batteries or the battery

pack from the equipment:

To Remove the old batteries or battery pack, follow

the assembly steps in reverse order. To prevent

contamination of the environment and bring on

possible threat to human and/or animal health, the

old batteries or the battery pack must be put in

an appropriate container at designated collection

points. Do not dispose of batteries or battery pack

together with other waste. It is recommended that

you use local, free reimbursement systems batteries

or battery packs, (may not be available in your area).

The batteries or the battery pack should not be

exposed to excessive heat such as sunshine, re or

the like.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 – Auto power down

6 – Portable In

6 Introduction

6 – Symbols used in this manual

6 Accessories

7 Remote control

8 Front panel

8 Rear panel

9 Installing the sound bar

10 Mounting the main unit on a wall

2 Connecting

12 Wireless subwoofer connection

13 Connecting to your TV

13 – Using an OPTICAL cable

14 Optional equipment connection

14 – OPTICAL IN connection

14 – PORT. IN connection

3 Operating

15 Operations

15 – Night mode

15 – Turn off the sound temporarily

15 – Using your TV remote control

16 – AUTO POWER On/Off

16 – Auto function change

17 Using BLUETOOTH®technology

17 – Listening to music stored on the

BLUETOOTH devices

18 Sound adjustment

18 – Setting the surround mode

18 – Adjust the woofer level settings

4 Troubleshooting

19 Troubleshooting

20 NOTES to use wireless

5 Appendix

21 Trademarks and licenses

22 Specifications

23 Maintenance

23 – Handling the unit

Getting Started

Unique features

Auto power down

This unit supports turning off by itself for energy

consumption saving.

Portable In

Listen to music from your portable device. (MP3

player, Notebook, Smart phone, etc..)

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Batteries (2)

Wall Bracket Install

guide (1) Wall bracket (1)

Optical cable (1)

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the Remote

Control, and insert the (size AAA) battery with

and matched correctly.

• • • • • • • • • • • • • • a• • • • • • • • • • • • •

1 (Power) : Switches the unit ON or OFF

F: Selects the function and the input source.

ASC :Analyzes the property of input sound and

provides the sound optimized for the content in

real time.

BASS BLAST : Selects reinforced bass sound.

CINEMA : Selects cinematic surround sound.

VOL o/p: Adjusts speaker volume.

(Mute) : Mutes the sound.

• • • • • • • • • • • • • • b• • • • • • • • • • • • •

C/V (Skip) : Skips Fast backward or Forward.

dM (Play/Pause) : Starts playback. / Pauses playback.

NIGHT ON/OFF :

- Turns on or off Night mode.

- Controls this unit using TV remote. (Refer to the

page 16)

WOOFER LEVEL o/p: Adjusts sound level of

subwoofer.

AUTO POWER ON/OFF: Turns on or off AUTO

POWER function. (Refer to the page 16.)

Getting Started

A1/! (Standby/On)

BF (Function)

Selects the function and input source.

Cp/o (Volume)

Adjusts volume level.

DStandby LED

It lights up in red on standby mode.

ERemote sensor

FFunction LED

yYou can check current function through

the LED.

yThis unit turns o LED If there is no key

input for 20 seconds. To display LED,

press any button.

yStandby LED quickly blinks when you

press any button, and slowly blinks in

Mute or Minimum volume status.

yBluetooth LED blinks when you select

Bluetooth function. If you connect a

Bluetooth device, the LED will turn on.

, Note

GSpeakers

Front panel

Rear panel

APORT. IN : Portable input BOPTICAL IN : Optical input

ABC

D E F

Getting Started

Installing the sound bar

You can hear the sound by connecting the unit to

another device: TV, Blu-ray disc player, DVD player, etc.

Place the unit in front of the TV and connect it to the

device you want. (Refer to pages 13 - 14.)

yFor best performance of wireless

connection such as Bluetooth or wireless

subwoofer, do not install the unit on

Metallic furniture because wireless

connection communicates through a

module positioned on the bottom of the

unit.

yBe careful not to make scratches on the

surface of the Unit or Sub-Woofer when

installing or moving them.

> Caution

Getting Started

Mounting the main unit

on a wall

You can mount the main unit on a wall.

Because it is difcult to make a connection after

installing this unit, you should connect the cables

before installation.

> Caution

Prepare screws and brackets.

Unit

Wall bracket

Wall Bracket Install

guide

1. Match the TV’s BOTTOM EDGE of Wall Bracket

Install guide with the bottom of TV and attach to

the position.

2. When you mount it on a wall (concrete), use the

wall plugs (Not supplied). You will need to drill

some holes. A guide sheet (Wall Bracket Install

guide) is supplied showing you where to drill. Use

the sheet to check the points where you should

drill.

Screws and Wall Plugs are not supplied for

mounting the unit. We recommend the Hilti

(HUD-1 6 x 30) for the mounting. Please

purchase it locally.

, Note

Andere Handbücher für SK3D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung