LG SN1 Bedienungsanleitung

OWNER’S MANUAL

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

SN1

www.lg.com

1806_Rev01

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked wire

insulation are dangerous. Any of these conditions

could result in electric shock or re. Periodically

examine the cord of your device, and if its appearance

indicates damage or deterioration, unplug it,

discontinue use of the device, and have the cord

replaced with an exact replacement part by an

authorized service center. Protect the power cord

from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall outlets,

and the point where the cord exits the device.

NOTICE: For safety marking information including

product identication and power supply ratings,

please refer to the main label on the bottom or the

other surface of the product.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the batteries or the

battery pack from the equipment: To Remove the

old batteries or battery pack, follow the assembly

steps in reverse order. To prevent contamination of

the environment and bring on possible threat to

human and/or animal health, the old batteries or the

battery pack must be put in an appropriate container

at designated collection points. Do not dispose

of batteries or battery pack together with other

waste. It is recommended that you use local, free

reimbursement systems batteries or battery packs,

(may not be available in your area). The batteries or

the battery pack should not be exposed to excessive

heat such as sunshine, re or the like.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

11 Installing the sound bar

2 Connecting

12 Connecting to your TV

12 – Using an OPTICAL cable

12 – LG Sound Sync

14 Optional equipment connection

14 – OPTICAL IN connection

14 – PORT. IN connection

15 – USB connection

15 – Compatible USB devices

15 – USB device requirement

16 – Playable file

3 Operating

17 Basic operations

17 – USB operation

17 Other operations

17 – Turn off the sound temporarily

17 – Using your TV remote control

18 – DRC (Dynamic Range Control)

18 – Auto power down

18 – AUTO POWER On/Off

19 – Auto function change

20 Using BLUETOOTH® technology

20 – Listening to music stored on the Bluetooth

devices

21 – BLUETOOTH connection lock (BT lock)

22 Using BLUETOOTH App

22 – Install “Music Flow Bluetooth” App onto

Your BLUETOOTH Device

22 – Activate Bluetooth with “Music Flow

Bluetooth” App

24 Sound adjustment

24 – Setting the surround mode

24 – Night mode

4 Troubleshooting

25 Troubleshooting

25 – General

26 – NOTES to use wireless

5 Appendix

27 Trademarks and licenses

28 Specifications

29 Maintenance

29 – Handling the unit

Getting Started6

Getting Started

Unique features

Auto power down

This unit supports to turn off by itself for saving

energy consumption.

Portable In

Listen to music from your portable device.

(MP3 player, Notebook, Smart phone, etc..)

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible

with LG Sound Sync.

BLUETOOTH®

Listens to music stored on your Bluetooth device.

USB playback

Listens to music stored on your USB device.

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert battery with 4and 5 matched

correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Power) : Switches the unit ON or OFF

F (Function): Selects the function and the input

source.

ASC : Analyzes the property of input sound and

provides the sound optimized for the content in real

time.

[ (Mute) : Mutes the sound.

VOL (Volume) o/p: Adjusts speaker volume.

BASS BLAST : Selects reinforce the treble, bass and

surround sound.

CINEMA : Selects cinematic surround sound.

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

C/V (Skip/Search) :

- Skips Fast backward or Forward.

- Searches for a section within a le.

N (Play/Pause) : Starts playback. / Pauses playback.

NIGHT ON/OFF :

- Turns on or off Night mode.

- Controls this unit using TV remote. (Page 17)

DRC ON/OFF : Dynamic Range Control optimizes

the volume level of compatible Dolby Digital content.

AUTO POWER ON/OFF :

Turns on or off AUTO POWER function. (Page 18)

- Turns on or off the Bluetooth connection lock

function. (Page 21)

Getting Started8

Getting Started

A1/! (Standby/On)

BF (Function)

Selects the function and input source.

Cp/o (Volume)

Adjusts volume level.

DStandby LED

It lights up in red on standby mode.

E Remote sensor

F Function LED

G Speakers

Front panel

A B C

D E F

Rear panel

APORT.IN : Connect to a Portable device.

BOPTICAL IN : Connect to an Optical device.

CUSB : Connect to a USB device.

Getting Started 9

Getting Started

About LED condition

: LED is staying on. : LED is blinking. : LED is off.

LED Condition Description

OPTICAL LED turns on. OPTICAL function is selected.

OPTICAL LED blinks twice and

turns on.

LG Sound Sync (Optical) function is

selected.

USB LED turns on. USB function is selected.

USB LED blinks. Paused USB playback.

Bluetooth LED turns on. Paired with Bluetooth device.

Bluetooth LED blinks. Waiting for Bluetooth connection.

PORTABLE LED turns on. PORTABLE function is selected.

LG TV LED turns on. LG Sound Sync (Wireless) function is

selected.

yWhen you press any button, standby LED (Red) on the main unit blinks.

yWhen you press [ (Mute) button, standby LED (Red) blinks slowly.

yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.

yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.

yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.

, Note

Getting Started10

Getting Started

Useful functions for using the unit

Function Description To do Do this

TV Remote On/

Off

(Page 17)

It allows you to control the

volume of this unit by your TV

remote control even by other

company’s product.

Initial setting of this function

was set to on.

ON Press and hold NIGHT ON on the remote

control for about 2 seconds.

The standby LED blinks once.

OFF Press and hold NIGHT OFF on the remote

control for about 2 seconds.

The standby LED blinks once.

BT Lock On/Off

(Page 21)

It allows you to connect a

Bluetooth device only on

Bluetooth and LG TV functions.

Initial setting of this function

was set to off.

ON Press and hold AUTO POWER ON on the

remote control for about 2 seconds in

Bluetooth function.

The standby LED blinks once.

OFF Press and hold AUTO POWER OFF on

the remote control for about 2 seconds in

Bluetooth function.

The standby LED blinks once.

Auto Power

On/Off

(Page 18)

It allows the unit to turn on

and off automatically by input

signals :

Optical, LG TV or Bluetooth

Initial setting of this function

was set to on.

ON Press AUTO POWER ON on the remote

control.

The standby LED blinks once.

OFF Press AUTO POWER OFF on the remote

control.

The standby LED blinks once.

Andere Handbücher für SN1

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung