LG SN10Y Technisches Datenblatt

SIMPLE MANUAL

Please read this manual carefully before operating your set and retain it for

future reference.

To view the instructions of advanced features, visit http://www.lg.com and

then download Owner’s Manual. Some of the content in this manual may differ

from your unit.

MODEL

SN10Y

www.lg.com

LG Wi-Fi

Sound Bar

ENGLISH

MFL71828403

SN10Y.DHKGLLK_SIMPLE_ENG_MFL71828403.indd 1 2021-04-12  1:00:27

Front Panel

1(Standby) ············Switches the unit ON or OFF.

F(Function) ··························Selects function.

p/o(Volume)······················ Adjusts volume.

/(Wi-Fi) ····················Selects Wi-Fi function.

Reset the Unit

Press and hold the /on the unit until you

hear the beep sound once.

Rear Panel

USB port ····················Connect to a USB device.

OPTICAL IN·············Connect to an optical device.

HDMI OUT (TV eARC/ARC) ······· Connect to a TV.

HDMI IN (1) / HDMI IN (2) ····················

Connect to device with HDMI OUT.

Make sure to properly align and connect

the optical cable; improper alignment may

cause damage to the jack.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and

follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar.

• The sound bar and wireless subwoofer will be

automatically connected. The subwoofer's

green LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make sound, try to

connect manually.

a Press Pairing on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless

subwoofer blinks quickly.

(If the green LED does not blink, press and

hold the Pairing.)

b Turn on the sound bar.

• Pairing is completed. The green LED on the

rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer

away from the device (ex. wireless router,

microwave oven, etc.) over 1 m to prevent

wireless interference.

!1 m

SN10Y.DHKGLLK_SIMPLE_ENG_MFL71828403.indd 2 2021-04-12  1:00:28

TV Connection

Connect the sound bar and TV using Optical ( ) or

HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

HDMI (TV eARC/ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

• HDMI connection is unavailable if your TV

does not support HDMI ARC.

• If this unit is connected by OPTICAL and

ARC at the same time, the ARC signal has

a higher priority.

Additional Device Connection

a Connect to the external device like as follow.

(Set-top Box,

Player etc.)

b Set the input source by pressing Frepeatedly.

Network Connection

a Check network condition. A router connected to

network should be installed.

b Connect your smart device to your home

network.

c Connect the sound bar to the power supply.

All devices should be connected to same

router.

Step.1 Install “Google Home” App

Download the Google Home App from the Google

Play or App Store.

Step.2 Set up the Wi-Fi connection with

app

a Connect your smart device to the Wi-Fi network

that you’ll use for your unit.

In case of iOS devices, it should be turned

on Bluetooth setting on your smart device.

b Launch the “Google Home” app.

c Follow the steps for Wi-Fi connection on the app.

• When the unit is properly connected to Wi-Fi,

“CONNECTED” will appear on the display

window with sound.

• When connect to Wi-Fi, this app may

request to create a Google Account. You

will need a Google account to use this app.

• “Google Home” app is provided by Google.

It might be revised by a change of Google

Policy.

SN10Y.DHKGLLK_SIMPLE_ENG_MFL71828403.indd 3 2021-04-12  1:00:29

Remote control

Replacement of Battery

SOUND EFFECT: Selects a sound effect mode.

- TV remote: Long press SOUND EFFECT and

press it again to use TV remote control.

FOLDER W/S:Searches a folder.

J:Displaystheinformationofale,aninput

source, a connected Bluetooth device name or an

application name.

- Auto Power ON/OFF: Long press Jand press

it again.

: Adjusts sound level of each speaker.

- Surround sound: Long press and press it

again.

REPEAT:Listenstoyourlesrepeatedlyorrandomly.

Additional

Download LG Sound Bar Application

You can manage the speaker settings and control the

speaker by using “LG Sound Bar”.

Download “LG Sound Bar” on the App Store or

Google Play Store.

AI Room calibration

AI Room Calibration is a sound tuning tool, which

adjusts the audio settings of the Sound Bar based on

the room acoustics and environment.

To access the AI Room Calibration it is necessary to

install the “LG Sound Bar” app. On [Sound Setting]

menu, choose [AI Room Calibration].

Additional Information

Specication

Power

requirements Refer to the main label.

Power

consumption Refer to the main label.

Dimensions

(W x H x D)

Approx.

1443.0 mm x 63.0 mm x

146.0 mm (with foot)

Bus Power

Supply (USB) 5 V 0500 mA

Amplier

(Total RMS

Output

power)

570 W RMS

Designandspecicationsaresubjecttochange

without notice.

Rear Speakers Ready

Ready for surround sound with Rear

Speakers Kit sold separately. (SPK8-S)

To enjoy content containing Dolby Atmos® and

DTS:X®, the connected device and content must

support Dolby Atmos® and DTS:X®.

SN10Y.DHKGLLK_SIMPLE_ENG_MFL71828403.indd 4 2021-04-12  1:00:29

OPEN SOURCE SOFTWARE NOTICE

INFORMATION

To obtain the source code under GPL, LGPL, MPL, and

other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to

you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of

media, shipping, and handling) upon email request to

opensourc[email protected].

This offer is valid for a period of three years after our

last shipment of this product. This offer is valid to

anyone in receipt of this information.

IMPORTANT SAFETY NOTICE

Thecordgripfortheplugttedtothisproductisbuilt

into the existing power cord as supplied. If, for any reason

you need to shorten the cord,

DO NOT RE-USE THE PLUG

A new plug must be used to ensure your continued safety

by securing the plug to the power cord in accordance with

Plug & Socket Regulations 1994.

Declaration of Conformity

Hereby, LG Electronics declares that the radio

equipment type Wi-Fi SOUND BAR is in compliance

with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following

internet address:

http://www.lg.com/global/support/cedoc/cedoc#

For consideration of the user, this device should be

installed and operated with a minimum distance of

20 cm between the device and the body.

SN10Y.DHKGLLK_SIMPLE_ENG_MFL71828403.indd 5 2021-04-12  1:00:29

SN10Y.DHKGLLK_SIMPLE_ENG_MFL71828403.indd 6 2021-04-12  1:00:29

Andere Handbücher für SN10Y

Inhaltsverzeichnis

Andere LG Lautsprechersystem Handbücher

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung