LG SPJ4BM-W Bedienungsanleitung

OWNER’S MANUAL

Wireless

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

SJ3 (SJ3, SPJ4BM-W)

www.lg.com

2203_Rev01

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In

case of an emergency, the Power Plug must

remain readily accessible. Check the specication

page of this owner’s manual to be certain of the

current requirements. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged wall

outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

device, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and power supply ratings,

please refer to the main label on the bottom or the

other surface of the product.

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery from the

equipment: Remove the old battery or battery pack,

follow the steps in reverse order than the assembly.

To prevent contamination of the environment and

bring on possible threat to human and animal health,

the old battery or the battery put it in the appropriate

container at designated collection points. Do not

dispose of batteries or battery together with other

waste. It is recommended that you use local, free

reimbursement systems batteries and accumulators.

The battery should not be exposed to excessive heat

such as sunshine, re or the like.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

10 Installing the sound bar

2 Connecting

11 Wireless subwoofer connection

12 Connecting to your TV

12 – Using an OPTICAL cable

12 – LG Sound Sync

14 Optional equipment connection

14 – OPTICAL IN connection

14 – PORT. IN connection

15 – USB connection

15 – Compatible USB devices

15 – USB device requirement

16 – Playable file

3 Operating

17 Basic operations

17 – USB operation

17 Other operations

17 – Turn off the sound temporarily

17 – Using your TV remote control

18 – Auto power down

18 – AUTO POWER On/Off

19 – Auto function change

20 Using BLUETOOTH® technology

20 – Listening to music stored on the Bluetooth

devices

22 Using BLUETOOTH App

22 – Install “LG Sound Bar” App onto Your

BLUETOOTH Device

22 – Activate BLUETOOTH with “LG Sound Bar”

App

24 Sound adjustment

24 – Setting the surround mode

24 – Adjust the woofer level settings

24 – Night mode

4 Troubleshooting

25 Troubleshooting

25 – General

26 – NOTES to use wireless

27 – NOTES to release Demo mode

5 Appendix

28 Trademarks and licenses

29 Specifications

30 Maintenance

30 – Handling the unit

Getting Started6

Getting Started

Unique features

Auto power down

This unit supports to turn off by itself for saving

energy consumption.

Portable In

Listen to music from your portable device.

(MP3 player, Notebook, Smart phone, etc..)

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible

with LG Sound Sync.

BLUETOOTH®

Listens to music stored on your Bluetooth device.

USB playback

Listens to music stored on your USB device.

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert battery with and matched

correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Power) : Switches the unit ON or OFF

F: Selects the function and the input source.

ASC : Analyzes the property of input sound and

provides the sound optimized for the content in real

time.

STANDARD : Selects standardized sound.

CINEMA : Selects cinematic surround sound.

VOL o/p: Adjusts speaker volume.

(Mute) : Mutes the sound.

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

C/V (Skip/Search) :

- Skips Fast backward or Forward.

- Searches for a section within a le.

dM (Play/Pause) : Starts playback. / Pauses playback.

NIGHT ON/OFF :

- Turns on or off Night mode.

- Controls this unit using TV remote. (Refer to the

page 17.)

WOOFER LEVEL o/p: Adjusts sound level of

subwoofer.

AUTO POWER ON/OFF :

- Turns on or off AUTO POWER function. (Refer to

the page 18.)

- Turns on or off the Bluetooth connection lock

function. (Refer to the page 21.)

Getting Started8

Getting Started

A1/! (Standby/On)

BF (Function)

Selects the function and input source.

Cp/o (Volume)

Adjusts volume level.

DStandby LED

It lights up in red on standby mode.

E Remote sensor

F Function LED

G Speakers

Front panel

Rear panel

APORT.IN : Portable input

BOPTICAL IN : Optical input

CUSB

A B C

D E F

Getting Started 9

Getting Started

About LED condition

LED Condition Description

OPTICAL LED turns on. OPTICAL function is selected.

OPTICAL LED blinks twice and

turns on.

LG Sound Sync (Optical) function is

selected.

USB LED turns on. USB function is selected.

USB LED blinks. Paused USB playback.

Bluetooth LED turns on. Paired with Bluetooth device.

Bluetooth LED blinks. Waiting for Bluetooth connection.

USB and Bluetooth LEDs turn

on. PORTABLE function is selected.

OPTICAL and USB LEDs turn

on.

LG Sound Sync (Wireless) function is

selected.

yWhen you press any button, standby LED (Red) on the main unit blinks.

yWhen you press (Mute) button, standby LED (Red) blinks slowly.

yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.

yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.

yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.

, Note

Getting Started10

Getting Started

Installing the sound bar

You can hear the sound by connecting the unit to the

other device : TV, Blu-ray disc player, DVD player, etc.

Place the unit in front of the TV and connect it to the

device you want. (Refer to pages 12 - 16)

yFor best performance of wireless connection

such as Bluetooth or wireless subwoofer,

do not install the unit on Metallic furniture

because wireless connection communicates

through a module positioned on the bottom

of the unit.

yBe careful not to make scratches on the

surface of the Unit / Subwoofer when

installing or moving them.

> Caution

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung