LG SQC4R Bedienungsanleitung

OWNER’S MANUAL

Wireless

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

SQC4R (SQC4R, SPQ1C-W), SPQ4-S (SPQ4-S, S67S3-S)

www.lg.com

2308_Rev02

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings should never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

NOTICE: For safety marking information including

product identication and power supply ratings,

please refer to the main label on the bottom or the

other surface of the product.

CAUTION: Be careful to make sure children do not

put their hands or any objects into the *speaker duct.

* speaker duct: A hole for plentiful bass sound on

speaker cabinet. (enclosure)

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

Install this apparatus in a location where the power

plug can be easily unplugged and plugged in. If there

is a re or problem with this apparatus, unplug it

quickly.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorised service centre.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

CAUTION: Only use the AC adapter supplied with

this device. Do not use a power supply from another

device or another manufacturer. Using any other

power cable or power supply may cause damage to

the device. The LG limited warranty does not cover

damage caused by the use of third party accessories.

For models using a battery

This device is equipped with a portable battery or

accumulator.

CAUTION: Risk of re or explosion if the battery is

replaced by an incorrect type.

For models using a built-in battery

Do not store or transport at pressures lower than

11.6 kPa and at above 15,000 m altitude.

yreplacement of a battery with an incorrect type

that can defeat a safeguard (for example, in the

case of some lithium battery types);

ydisposal of a battery into re or a hot oven, or

mechanically crushing or cutting of a battery, that

can result in an explosion;

yleaving a battery in an extremely high temperature

surrounding environment that can result in an

explosion or the leakage of ammable liquid or

gas; and

ya battery subjected to extremely low air pressure

that may result in an explosion or the leakage of

ammable liquid or gas.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

11 Installing the sound bar

12 Mounting the main unit on a wall

14 Rear speakers Installation

2 Connecting

15 Connecting the AC Adapter

15 Wireless subwoofer connection

17 – Rear speakers connection

18 – Surround sound

21 Connecting to your TV

21 – Using an OPTICAL cable

21 Optional equipment connection

21 – OPT. IN connection

22 – PORT. IN connection

22 – USB connection

22 – Compatible USB devices

23 – USB device requirement

23 – Playable file

3 Operating

25 Basic operations

25 – USB operation

25 Other operations

25 – DRC (Dynamic Range Control)

25 – Turn off the sound temporarily

25 – Using your TV remote control

26 – Auto display Dimmer

26 – Auto power down

26 – AUTO POWER On/Off

27 – Auto function change

28 Using BLUETOOTH® technology

28 – Listening to music stored on the Bluetooth

devices

29 – BLUETOOTH connection lock (BT lock)

30 Sound adjustment

30 – Setting the surround mode

30 – Adjust the woofer level settings

30 – Adjust t he rear speakers level settings

4 Troubleshooting

31 Troubleshooting

31 – General

32 – NOTES to use wireless

5 Appendix

33 Trademarks and licenses

34 Specifications

36 Maintenance

36 – Handling the unit

Getting Started6

Getting Started

Unique features

Auto power down

This unit supports to turn off by itself for saving

energy consumption.

Portable In

Listen to music from your portable device.

(MP3 player, Notebook, Smart phone, etc..)

BLUETOOTH®

Listen to music stored on your Bluetooth device.

USB playback

Listen to music stored on your USB device.

Surround sound

You can enjoy surround sound by using Wireless Rear

Speaker kit. (SPQ4-S)

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert battery with and matched

correctly.

Risk of re or explosion if the battery is replaced by

an incorrect type.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1(Standby) : Switches the unit ON or OFF

F (Function) : Selects the function.

BASS BLAST ON / OFF : Press the button to turn

BASS BLAST on or off. (Page 30)

[ (Mute) : Mutes the sound.

DRC ON/OFF :

- Turns on or off DRC function.

(Page 25)

- Controls this unit using TV remote.

(Page 25)

VOL (Volume) o/p: Adjusts speaker volume.

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

C/V (Skip/Search) :

- Skips Fast backward or Forward.

- Searches for a section within a le.

N (Play/Pause) :

- Starts playback.

- Pauses playback.

REAR LEVEL o/p:

- Adjusts sound level of rear speakers.

- Turns on or off Surround function. (Page 18)

WOOFER LEVEL o/p: Adjusts sound level of

subwoofer.

AUTO POWER ON/OFF :

- Turns on or off AUTO POWER function. (Page

26)

- Turns on or off the Bluetooth connection lock

function. (Page 29)

Getting Started8

Getting Started

Front panel

Rear panel

Ao/p (Volume) : Adjusts volume level

F (Function) : Selects the function.

1(Standby)

B (USB) : Connect to a USB device.

CPORT.IN (Portable) : Connect to a Portable

device.

DOPT. IN (Optical) : Connect to an Optical device.

EDC IN : Connect to the AC adapter.

Standby LED (Red)

Function LED (White)

Remote sensor

The buttons are located on the rear.

Getting Started 9

Getting Started

About LED condition

LED Condition Description

OPTICAL LED turns on. OPTICAL function is selected.

USB LED turns on. USB function is selected.

USB LED blinks. Paused USB playback.

Bluetooth LED turns on. Paired with Bluetooth device.

Bluetooth LED blinks. Waiting for Bluetooth connection.

PORTABLE LED turns on. PORTABLE function is selected.

yWhen you press any button, standby LED (Red) on the main unit blinks.

yWhen you press [ (Mute) button, standby LED (Red) blinks slowly.

yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.

yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.

yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.

, Note

Getting Started10

Getting Started

Useful functions for using the unit

Function Description To do Do this

TV Remote On/

Off

(Page 25)

It allows you to control the

volume of this unit by your TV

remote control even by other

company’s product.

Initial setting of this function

was set to on.

ON Press and hold DRC ON on the remote

control for about 2 seconds.

The standby LED (Red) blinks once.

OFF Press and hold DRC OFF on the remote

control for about 2 seconds.

The standby LED (Red) blinks once.

BT Lock On/Off

(Page 29)

It allows you to connect a

Bluetooth device only on

Bluetooth functions.

Initial setting of this function

was set to off.

ON Press and hold AUTO POWER ON on the

remote control for about 2 seconds in

Bluetooth function.

The standby LED (Red) blinks once.

OFF Press and hold AUTO POWER OFF on

the remote control for about 2 seconds in

Bluetooth function.

The standby LED (Red) blinks once.

Auto Power

On/Off

(Page 26)

It allows the unit to turn on

and off automatically by input

signals :

Optical or Bluetooth.

Initial setting of this function

was set to on.

ON Press AUTO POWER ON on the remote

control.

The standby LED (Red) blinks once.

OFF Press AUTO POWER OFF on the remote

control.

The standby LED (Red) blinks once.

Andere Handbücher für SQC4R

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung