LG SPQ8-S Bedienungsanleitung

OWNER’S MANUAL

Wireless

Rear Speakers Kit

Please read this manual carefully before operating your set and retain it for future

reference.

Model

SPQ8-S (SPQ8-S, S78S2-S)

2201_Rev01

www.lg.com

Wireless Receiver Quick Guide

Installing and using the Product

A Rear Speakers

B Wireless Receiver

Wireless Receiver Quick Guide

a Connect the rear speakers to the wireless receiver via a speaker cable. When connecting the rear speakers

to the wireless receiver, connect the black striped cable to the negative terminal of each speaker and the

remaining cable to the positive terminal of each speaker.

b Connect to power in the following order: wireless receiver [sound bar. Then, turn on the sound bar. When

the connection is automatically established with the sound bar, the LEDs on the wireless receiver will light up

green.

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not

connected to the speakers. If this is the case, connect them in the following order.

A Press the Power button on the sound bar to turn it off.

B Press the PAIRING button on the back of the disconnected wireless receiver. Check if each LED blinks

green.

C Press the Power button on the sound bar to turn it on.

D When the connection is established, you will see a green LED light on the front of the wireless receiver

light up green.

Table of Contents

Wireless Receiver Quick Guide

2Installing and using the Product

Installation

5Supported LG Sound Bar models

6Connecting the Product

Setting up surround sound

9Turning surround sound on/off

Safety Precautions

10 Safety and Regulatory

Before Reporting Product

Malfunction

13 Troubleshooting

Appendix

14 Specications

15 Registered Trademarks and Licenses

16 Handling the Product

Installation

Supported LG Sound Bar models

SPQ8-S can only be connected to some LG sound bar models and is not compatible with sound bars from other

companies.

For more information on compatible models, please scan the following QR code.

(Compatible LG Sound Bar)

Installation

Connecting the Product

Connecting the rear speakers to the wireless receiver

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the

sound bar to the wireless receiver in the following order.

a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the

black striped cable to the negative terminal and the other cable to the positive terminal.

b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Colour Speaker Position

Blue LLeft rear

Grey RRight rear

c Plug the power cable into the wireless receiver.

d Plug the power cable connected to the wireless receiver into an outlet.

e Press the Power button on the sound bar to turn it on.

f When the connection is automatically established, you will see the LED on the front of the wireless receiver

light up green.

Note

• Please only use the speakers provided with the product. Using other speakers may cause malfunction.

• Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive

terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound

or produce no bass.

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour Status

Blinking green Connecting In progress

Green Connected successfully

Red Bad connection, or the receiver is in standby

Off Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the

receiver. If this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless

receiver is blinking green.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the front of the wireless receiver light up

green.

Note

• Keep the rear speakers at least 30 cm away from the TV or monitor.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless

receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,

microwave ovens, etc.).

Attaching the ferrite core (optional)

A ferrite core may not be provided depending on national standards.

Attaching the ferrite core to the speaker cables

Attach the ferrite core to the cables to reduce radio noise.

a Pull Part [a] to open the ferrite core.

b Wind the wireless receiver's speaker cables twice around the ferrite core. A distance of about 18 cm is

required between the wireless receiver and the ferrite core.

c Close the ferrite core until you hear a click.

Setting up surround sound

Turning surround sound on/off

a Press Settings button. The product enters the setting mode and you can see “OFF-AUTO POWER” or

“ON-AUTO POWER”.

OFF-AUTO POWER

b While the “OFF-AUTO POWER” or “ON-AUTO POWER” is scrolling in the status display, press Left/

Right button to select the surround sound setting. You can see the status of the surround sound, “OFF-

SURROUND” or “ON-SURROUND”.

OFF-AUTO POWER

OFF-SURROUND

OFF-NIGHT TIME

OFF-TV REMOTE

c While the “OFF-SURROUND” or “ON-SURROUND” is scrolling in the status display, press Up/Down

button to turn on or off the surround sound.

OFF-SURROUND ON-SURROUND

Setting up surround sound

Safety Precautions

Safety and Regulatory

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-

SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Thislightningashwitharrowheadsymbolwithinanequilateraltriangleisintendedto

alert the user to the presence of uninsulated dangerous voltage within the product’s

enclosurethatmaybeofsufcientmagnitudetoconstituteariskofelectricshockto

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

WARNING:

• TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• Donotinstallthisequipmentinaconnedspacesuchasabookcaseorsimilarunit.

CAUTION:

• Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due

to electrical shock.

• Nonakedamesources,suchaslightedcandles,shouldbeplacedontheapparatus.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and

openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to

protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or

other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s instruction has been adhered to.

• Theapparatusshouldnotbeexposedtowater(drippingorsplashing)andnoobjectslledwithliquids,suchas

vases, should be placed on the apparatus.

• Forsafetymarkinginformationincludingproductidenticationandsupplyratings,pleaserefertothemain

label on the bottom or the other surface of the product.

• Be careful to make sure children do not put their hands or any objects into the *speaker duct.

- * speaker duct: A hole for plentiful bass sound on speaker cabinet. (enclosure)

Safety Precautions

Andere Handbücher für SPQ8-S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung