LG ThinQ WK7 Technisches Datenblatt

SIMPLE MANUAL

MODEL

WK7 / WKM7

www.lg.com

MFL70405137

1903_Rev01

Safety Information

AUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK) NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage within the

product’s enclosure that may be of sufcient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

WARNING:

yTO PREVENT FIRE OR ELECTRIC SHOCK

HAzARD, DO NOT ExPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

yDo not install this equipment in a conned

space such as a book case or similar unit.

yThis unit contains magnets which can

be harmful to some kind of object (Ex:

Magnetic card, Pacemaker etc..).

CAUTION:

yDo not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings should never be blocked by

placing the product on a bed, sofa, rug or other

similar surface. This product shall not be placed

in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the

manufacturer’s instruction has been adhered to.

yThe apparatus should not be exposed

to water (dripping or splashing) and no

objects lled with liquids, such as vases,

should be placed on the apparatus.

yNo naked ame sources, such as lighted

candles, should be placed on the apparatus.

yTo avoid re or electric shock, do not open the

unit. contact to qualied personnel only.

yDo not leave the unit in a place near the

heating appliances or subject to direct

sunlight, moisture, or mechanical shock.

yThe Power Plug is the disconnecting

device. In case of an emergency, the Power

Plug must remain readily accessible.

yTo clean the unit, use a soft, dry cloth. If

the surfaces are extremely dirty, use a

soft cloth lightly moistened with a mild

detergent solution. Do not use strong

solvents such as alcohol, benzine, or

thinner, as these might damage the

surface of the unit.

yDo not use volatile liquids such as

insecticide spray near the unit. Wiping with

strong pressure may damage the surface.

Do not leave rubber or plastic products in

contact with the unit for a long period of

time.

yDo not place the unit over the vehicle’s

air bag. When the air bag deploys, it may

result in injury. Before using in the car, x

the unit.

yDo not use the handsfree function during

driving a car.

yDo not leave the unit on an unstable place

such as high shelves. it may fall down

because of the vibration of the sound.

yDo not use high voltage products around this

product. (ex. Electrical swatter) This product

may malfunction due to electrical shock.

CAUTION when using this product in

environments of low humidity.

yIt may cause static electricity in environments

of low humidity.

yIt is recommended to use this product after

touching any metal object which conducts

electricity.

NOTICE: For safety marking information

including product identication and supply

ratings, please refer to the main label on the

bottom or the other surface of the product.

CAUTION: Only use the AC adapter supplied

with this device. Do not use a power supply

from another device or another manufacturer.

Using any other power cable or power supply

may cause damage to the device and void your

warranty.

Symbols

Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

FCC Compliance Statement

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the following

measures:

yReorient or relocate the receiving antenna.

yIncrease the separation between the

equipment and the receiver.

yConnect the equipment to an outlet on

a circuit different from that to which the

receiver is connected.

yConsult the dealer or an experienced

radio/TV technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) this device may not cause

harmful interference and (2) this device must

accept any interference received, including

interference that may cause undesired

operation. Any changes or modications in

construction of this device which are not

expressly approved by the party responsible

for compliance could void the user’s authority

to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be

co-located or operating in conjunction with

any other antenna or transmitter.

This equipment should be installed and

operated with minimum distance 20 cm (7.8

inches) between the antenna and your body.

Users must follow the specic operating

instructions for satisfying RF exposure

compliance.

FCC Radio Frequency Interference

Requirements: High power radars are

allocated as primary users of the 5.25 to 5.35

GHz and 5.65 to 5.85 GHz bands. These

radar stations can cause interference with

and/or damage this device. This device cannot

be co-located with any other transmitter

Supplier’s Declaration of Conformity

Trade Name LG

Responsible Party

LG Electronics USA, Inc.

Address

1000 Sylvan Ave Englewood

Cliffs, NJ 07632

Telephone (201)266-2215

IMPORTANT SAFETY

INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or the

third prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus,

the apparatus has been exposed to rain

or moisture, does not operate normally,

or has been dropped.

USA Only (Product with embedded

rechargeable battery ONLY)

In case rechargeable battery is included in

this product, the entire device should be

recycled in compliance with rechargeable

battery recycling standards because of the

internal battery.

To dispose of properly, call (800) 822-8837

or visit www.call2recycle.org.

OPEN SOURCE

SOFTWARE NOTICE

INFORMATION

To obtain the source code under GPL, LGPL,

MPL, and other open source licenses, that is

contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred

license terms, warranty disclaimers and

LG Electronics will also provide open source

code to you on CDROM for a charge covering

the cost of performing such distribution (such

as the cost of media, shipping and handling)

upon email request to opensource@lge.

com. This offer is valid for a period of three

years after our last shipment of this product.

This offer is valid to anyone in receipt of this

information.

Disclaimers

yGoogle, Google Home, Google Play,

Chromecast built-in and other related marks

and logos are trademarks of Google LLC.

yGoogle Assistant requires an internet/data

connection. Data rates may apply.

yThe Google Assistant is not available in

certain languages and countries.

ySubscriptions may be required, and additional

terms, conditions and/or charges may apply.

yControlling certain devices and features

in your home requires a compatible smart

device.

Set up

Step 1. Connect the AC

adapter

After connecting the AC adapter, the

speaker starts booting. Then Function

LED rotates for 10 seconds (Approx. 30

~ 50 seconds) during booting.

Step 2. Install "Google

Home" App

Download the Google Home App from

the Google Play or App Store.

Google Home

The speaker is not compatible with the

“Smart ThinQ” app. So it can not be

used for setup or for control by using

the “Smart ThinQ” app.

NOTE

Step 3. Set up the

Wi-Fi connection with app

aConnect your smart device to the

Wi-Fi network that you’ll use for

your speaker.

In case of iOS devices, it should be

turned on Bluetooth setting on your

smart device.

NOTE

bLaunch the “Google Home” app.

Andere Handbücher für ThinQ WK7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung