LG MultiVision AB-VL200X Bedienungsanleitung
Owner's Manual
MultiVision Mounting Bracket
Please read the safety information carefully before using the product.
AB-VL200X
AB-VP200X
P/NO : MFL63640509 (1112-REV01)
2
Accessories
4 Guide Spacer
Owner's Manual
4 Guide Spacer Fixing
Screws
(M8X32mm)
3 Bracket
Fixing Screws
(M8X100mm)
MultiVision Mounting Bracket-Landscape
AB-VL200X
MultiVision Mounting Bracket-Portrait
AB-VP200X
3 Nuts
Wrench
MultiVision Mounting Bracket
3
ENGLISH
After reading the manual, please keep it handy for future reference.
- If you are a professional installer, please read this manual carefully before installing the product.
- After installing the product according to the manual, ensure that the user also reads the manual carefully.
Safety Precautions
Warning
The product should be installed by a qualified professional
specified by the retail store.
Installing the product without a qualified professional is dangerous and may
cause injury.
The product should be installed where its weight can be
supported.
If the product is installed on a weak surface, the product may fall and cause
injury.
When moving or replacing the product after installation,
contact a qualified installer specified by the retail store.
Installation or movement of the product must be carried out by a skilled
professional. If an unqualified person moves and installs the product, this
may cause safety issues.
Prior to installing the product, arrange the power cable and
signal cable to prevent damage during installation.
Damaged cables may result in a fire, electric shock or damage to the product.
Do not hang on the product or apply shock to the product.
The product may fall and cause injury.
Do not clean the product with wet towels, and do not use a heater or
humidifier underneath the product.
Moisture permeating into the product, including through steam and heat, may
result in a fire, electric shock or damage to the product.
Make sure that the power cord is removed from the outlet before installing
the product.
Otherwise, it may cause an electric shock or a fire.
Keep the product away from sprinklers, sprinkler sensors, high-tension
wires and power sources. Do not install the product in a location where
vibrations or shock impacts are likely to occur.
Wear working gloves when installing the product. Do not use bare hands.
Otherwise, it may cause injury.
Caution
Follow the instructions in the manual to install the product.
If you do not follow the instructions, the product may not be installed properly,
causing serious injury or damage to the product.
To install or adjust the height of the product, two or more people are
needed.
If you try to install or move the product alone, it may fall and cause injury or damage to
the product.
Before installing the product, check whether the wall is strong enough to
hold the product.
Installing the product on a wall that cannot hold its weight may cause safety issues.
When sets are built in to a wall, the internal temperature may rise to such an extent that it
causes overheating, which may lead to a fire. To prevent the set from overheating, please
follow the instructions below.
Avoid completely sealed installation.
To ensure adequate ventilation, keep the top, the bottom and the sides of the set a
minimum of 20 cm from the wall. (The back of the set should be a minimum of 15 cm
from the wall.)
If there is not enough space, a separate ventilation device is required.
If you install four or more sets on top of one another, you will need to ensure a ventilator is
used. (for example, a forced draft fan.)
20cm
20cm 15cm
4
When moving or lifting the monitor, read the
following to prevent the monitor from being
scratched or damaged and for safe transportation
regardless of its type and size.
It is recommended to move the monitor in
the box or packing Cover that the monitor
originally came in.
Before moving or lifting the monitor,
disconnect the power cord and all cables.
Hold the top and bottom of the monitor frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
Avoid touching the screen at all times, as this
may result in damage on the screen.
CAUTION
When transporting the monitor, do not expose
the monitor to jolts or excessive vibration.
When transporting the monitor, keep the
monitor upright, never turn the monitor on its
side or tilt towards the left or right.
When transporting the monitor by hand,
hold the monitor as shown in the following
illustration.
When the product is carried upright, 2 persons
carry by holding the bottom and top of the
front, and when it is being put down, put down
carefully for the panel not to be touched.
When the product is carried laid down, 2
persons carry by holding the bottom of the
back, and when it is being put down, put down
carefully for the panel not to be touched.
Transportation method for panel protection
5
ENGLISH
<Correct method>
Panel Cushion
If the product needs to be
set upright, hold both sides
of the product, and tilt back-
ward carefully for the panel
not to touch the floor. (The
setting upright of the set is
possible with the outer frame)
When laying down the prod-
uct, lay a cushion on a flat
floor, and put the product on
it with the panel of the prod-
uct facing down.
<Incorrect method>
Panel
Panel
If the product is tilted to the
side of the panel, the bottom
of the panel may be dam-
aged.
If the product is tilted to the
edge of the panel, the edge
of the panel may be dam-
aged.
Handle the product with care. The product may be damaged by shocks.
NOTE
Storage method for panel protection
6
How to Install
Attach the brackets using two bracket fixing screws (M8 x 100mm) and nuts. The procedure is based on 2X2 installation.
Assembling the MultiVision Bracket
1
Nut
SCALE 0.100 SCALE 0.100
Before Installation
* Do not use this product for purposes other than to attach the monitor to the wall.
* Be careful when installing and using the bracket to prevent product damage and safety hazards.
* If the instructions in the manual are unclear, stop the installation and contact the service center.
If you are still having problems understanding the instructions after contacting the center, seek a professional to install the product.
* An individual with experience in mechanical and architectural fields may not have any difficulty understanding this manual or installing the product,
even if they are not a professional.
* When installing the bracket on a concrete wall or on any other walls capable of holding the strength specified in the manual, you may detach the
standard gap bracket for stud wall mounting then follow the instructions for attaching the bracket to make the installation easier.
* Only install the bracket on vertical walls. Do not install the bracket on a wall inclined at an angle, exceeding the standard range or on the ceiling. LG
Electronics is not liable for problems that occur due to the installation of the product on a slanted wall or on the ceiling.
* Check the accessories provided with the product before installing. LG Electronics is not liable for any damage to or loss of the accessories after the
package has been opened.
* Make sure that the accessories are kept out of reach of children to prevent safety accidents, such as choking due to swallowing small parts.
* Make sure that the screws are fixed tightly. Applying excessive force to screws may impair the performance or reduce the strength of the product, or
cause it to become damaged.
* Make sure that the monitor to be installed does not exceed the specified tension load and that no external force is applied.
* In order to prevent accidents, take care when handling tools during installation of the product.
<Tools for Installation>
Philips screwdriver (manual or electric)/8mm spanner/drill/level meter
Bracket Fixing Screw
(M8 x 100mm)
The illustration depicts a landscape installation, but the procedure is identical to that of a portrait installation.)
Check the direction of the arrows shown in the figure above to avoid placing the bracket upside down.
CAUTION
7
ENGLISH
r
MultiVision Wall Bracket-Landscape
AB-VL200X
MultiVision Wall Bracket-Portrait
AB-VP200X
Refer to the following illustration to fix the brackets according to the type.
2Verifying Where the Brackets Are Fixed
A bolt
The bracket may be distorted, depending on the
flatness of the wall. Adjust the flatness of the bracket
using the A bolts attached to it.
SCALE 0.100
Use a bolt that is capable of holding the weight of the product.
(The combined weight of the set and the bracket is approx. 50kg.
We recommend using an bolt & Nut.)
3Attaching the Guide Spacers
If the screws are not fully tightened when you fix the guide spacers, check the length of the screws and refer to the technical
service manual.
<How to Fix Guide Spacers>
Fix the guide spacers and the guide spacer fixing screws in the order shown in the picture.
Lay the set down and fix the guide spacers to the set using the screws.
- Place the product on a table with its screen facing downward. Make sure that you place it on soft clothing or a cushion on the flat surface
to protect the screen.
- Tighten the screw until the set, the guide spacer and the screw are joined together securely.
- Use a Philips driver (manual or electric) to tighten the screws.
Guide Spacer
4 Guide Spacer Fixing Screws (M8X32mm)
8
5
6
How to Attach the Product and Bracket
Connecting Cables
- Two or more people are needed to install the product.
- It is recommended to arrange cables using the bracket firat to install the set.
- For information on how to connect cables, please refer to the set's owner's manual.
Place the product assembled with the guide spacers, as illustrated with the arrow.
- Make sure that the product is fixed securely by checking attachement.
4Dip switch setting
OFF
ON
1234 1234
1234 1234
1234 1234
monitor #3
1234 1234
monitor #4
1234 1234
monitor #5
1234 1234
monitor #1
monitor #2
Factory reset
DVI-D OUT DVI-D IN RGB OUT
RGB IN
SPEAKER
(8)
(SERVICE ONLY)
USB
HDMI 2
HDMI1/DVI COMPONENT IN
RX TX
1
9
ENGLISH
7Set Arrangement
The procedure is based on 3X3 installation.
Set Arrangement step : 8 → 5 → 2, 7 → 4 → 1, 9 → 6 → 3
1. Mount set 8, then loosen the horizontal alignment screws to lower the set by approximately 30mm.
(Caution: Otherwise, when set 5 is mounted the sets may collide and cause damage.)
Once the set is lowered, use the horizontal alignment screws to align the set horizontally. Tighten the right/left
screws.
SCALE 0.100
7
9
46
1
3
8
5
2
<Horizontal Alignment Screw>
Loosen the screw to lower the set.
(Loosen the right and left screws gently in turn.)
<Right/Left Fixing Screw>
Tighten the screws to fix the left and right slides.
10
2. Mount set 5, then remove the module-protecting Cover on sets 8 and 5.
Insert Guide pins as shown in the figure below.
3. Loosen the horizontal alignment screws on bracket 5, then attach set 5 to set 8.
(Caution: Loosen the right and left horizontal alignment screws gently in turn to prevent the set from tilting and causing damage.)
Fasten the right and left slides of set 5 using the right/left fixing screws.
Remove the module-protecting Cover.
(The protective Cover is attached on all four sides; only re-
move first the Cover on the sides where the sets meet.)
5
5
8
8
<Horizontal Alignment Screw>
Loosen the screw to lower the set.
(Loosen the right and left screws gently in turn.)
<Right/Left Fixing Screw>
Tighten the screws to fix the left and right slides.
Stopper
<Warning>
Push the top set to the bottom set until the stopper slightly
touches the bottom set. Pushing the product with force may
cause damage to the product.
4
CAUTION
Loosen the left and right leveling screws slowly in turns. Otherwise, this may make
the set tilted, which may cause damage to the set.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere LG TV-Halterung Handbücher
LG
LG WB21LMB Bedienungsanleitung
LG
LG OSW100 Handbuch
LG
LG LSW600B Bedienungsanleitung
LG
LG WB21LMB Bedienungsanleitung
LG
LG MultiVision SPM42C4-WP Bedienungsanleitung
LG
LG LSW350B Handbuch
LG
LG LSW400BG Bedienungsanleitung
LG
LG OLW480B Bedienungsanleitung
LG
LG WM-L640V Bedienungsanleitung
LG
LG LBK1000W Bedienungsanleitung
LG
LG WM-B640S Bedienungsanleitung
LG
LG LSW200BG Bedienungsanleitung
LG
LG LSW230B Bedienungsanleitung
LG
LG LSW430B Bedienungsanleitung
LG
LG LSW840B Handbuch
LG
LG LSW240B Bedienungsanleitung
LG
LG WB21LGB Bedienungsanleitung
LG
LG LSW200B Bedienungsanleitung
LG
LG LSW440B Bedienungsanleitung
LG
LG LSW400BG Bedienungsanleitung
