LG WD-1070FD Bedienungsanleitung

ow to use washer

•Push the Power button to start.

•Push the Start/Pause button.

•Initial condition

- Wash : Only main wash

- Rinse : 3 times

- Spin : 800 rpm

- Water temperature : 40˚C

- Program : Coloureds

•Push the Power button to start.

•Select the conditions which you want to

use, by pressing each button.

For selecting the each conditions, please

refer to the page15~page20

•Push the Start/Pause button.

1. For use in the initial

programme (Coloureds) 2. Manual Selecting

ow to use washer

(1) Button : Option

(2) Button : Spin

(3) Button : Temp.

(4) Child lock

(5) Button : Time Delay

(6) Button : Rapid

(7) Button : Start/Pause

(8) Dial : Program

(9) Button : Power

(1) (2) (3) (4) (5) (6) (7) (8) (9)

1. Bio

2. Rinse+

Option

•By pressing the Option

button, the Option function

can be selected.

- Bio

- Rinse+

- Eco

- Pre Wash

•

If you want to elimenate protein stains(milk, blood,

chocolate...), you may select Bio function by

pressing the option button.

[You can select Bio function when temperature is

higher than 60 C in Whites, Coloureds and

Synthetic.]

•If you wish to rinse more, Rinse+function

will remove any trace of detergents.

•By selecting Rinse+function, the Rinse

Time and the Rinse water are increased.

4. Pre Wash

3. Eco

•By selecting Eco function, the water

temperature is reduced and washing time is

lengthened. So you can economize in your

consumption of energy.

[You can select Eco function when

temperature is higher than 60 C in Whites,

Coloureds and Synthetic.]

•If the laundry is heavily soiled, “Pre Wash”

course is effective.

•Pre Wash is available in Whites,

Coloureds and Synthetic.

If lamp turns on, that function has been

selected.

ow to use washer

1. Spin selection

Spin

•By pushing the Spin button, the spin rpm

can be chosen.

[WD-1070(5)F(H)(B)] [WD-1170(5)F(H)B]

•Spin speed is available according to the

program as follows.

•WD-8070F(H)(B)

- Whites / Coloureds / Synthetic

800URinse HoldUNo SpinU400U600

- Delicate / Wool / Hand Wash

400U600U800URinse HoldUNo Spin

•WD-1070(5)F(H)(B)

- Whites / Coloureds/Synthetic

800U1000URinse HoldUNo

SpinU400U600

- Delicate

400U600U800URinse HoldUNo Spin

- Wool / Hand Wash

400U600U800U1000URinse HoldUNo

Spin

•WD-1170(5)F(H)B

- Whites / Coloureds/Synthetic

800U1100URinse HoldUNo

SpinU400U600

- Delicate

400U600U800URinse HoldUNo Spin

- Wool / Hand Wash

400U600U800U1100URinse HoldUNo

Spin

•WD-1270(5)F(H)B

- Whites / Coloureds

800U1000U1200URinse HoldU

No SpinU400U600

- Synthetic

800U1000URinse HoldUNo SpinU

400U600

- Delicate

400U600U800URinse HoldUNo Spin

- Wool / Hand Wash

400U600U800U1000URinse HoldUNo

Spin

[WD-8070F(H)(B)]

[WD-1270(5)F(H)B] [WD-1370(5)F(H)B]

ow to use washer

2. No spin

•WD-1370(5)F(H)B

- Whites / Coloureds

800U1100U1300URinse HoldU

No SpinU400U600

- Synthetic

800U1100URinse HoldUNo SpinU

400U600

- Delicate

400U600U800URinse HoldUNo Spin

- Wool / Hand Wash

400U600U800U1100URinse HoldUNo

Spin

3. Rinse Hold

•If you desire to leave fabrics in the machine

without spinning after rinse to prevent them

from getting wrinkled, you may select rinse

hold by pressing the spin button.

•If you want to drain and spin, when Rinse

Hold function is proceed, Push the

Start/Pause button to cancel the Rinse Hold

function and select spin speed or program.

Push the Start/Pause button again to start

program.

•If you want to drain only, select the no spin

or pump program.

If lamp turns on, that function has been selected.

•If no spin is selected, the washer stops after

draining water.

If lamp turns on, that function has been

selected.

1. Water Temperature

Water Temp.

•By pushing the Temp

button, the water

temperature can be

selected.

- Cold

- 30˚C / 40˚C / 50˚C / 60˚C /

95˚C

•Water temperature can be selected as

below according to the program.

- Whites

95˚C

40˚C

50˚C

60˚C

- Coloureds & Synthetic

40˚C

50˚C

60˚C

Cold

30˚C

- Delicate & Wool

30˚C

40˚C

Cold

- Hand Wash

Cold

30˚C

40˚C

Selected temperature’s lamp turns on.

For the more detailed information, please refer

to the page13.

ow to use washer

Child lock

Time Left

Change

the desired

program

If you want to lock all the buttons to prevent

operation by a child or infirm persons, this

function can be used.

•Child lock can be set by pressing the Temp.

button and Time Delay button simultaneously.

•

When child lock is set, all buttons are inoperable.

•To deactivate Child lock system, push Temp. and

Time Delay button simultaneously again.

•If you want to change the program when Child

lock is active,

1. Press both Temp. and Time Delay together.

2. Press the Start/Pause button.

3. Change the desired program and press the

Start/Pause button.

•The child lock can be set at any time and it is

automatically canceled when operational errors

occur. Also Child lock works when power is off.

1. Child lock

Time Left Time Left

Time Delay

1. Time Delay

Preparing washing before starting “Time

Delay”

- Turn on the water tap.

- Load laundry and close the door.

- Place the detergent and fabric softener in

the drawer.

•How to set “Time Delay”

- Push Power button.

- Turn the Programme dial to select

the program you require.

- Push Time Delay button and set the

desired time.

- Push the Start/Pause button.

(“:”blinks.)

•If Time Delay button is pushed, “3:00”is

displayed. The maximum delayed time is

19:00 hours and the minimum time is 3:00

hours.

•Each pushing of the button advances on

time delay by one hour.

•To cancel the time delay, push the Power

button.

•Time Delay is ‘expected time’from the

present to the completion of washing cycle

or selected process (Wash, Rinse, Spin).

• According to the condition of water supply and

temperature, the delayed time and the actual

washing time may vary.

ow to use washer

Rapid

1. Rapid

•By pressing the Rapid

button, Rapid function is

selected.

•Rapid function reduces the whole time

including the washing and rinsing time

about by half an hour.

•Rapid is available in Whites, Coloureds

program.

If lamp turns on, that function has been selected.

Start/Pause

•This Start/Pause button is used to start

wash cycle or pause the cycles.

•If temporary stop of wash cycle is needed,

push “Start/Pause”button.

•After the pause button is pressed, the power

is turned off automatically 4 minutes later.

1. Start

2. Pause

Programme

•9 programs

are available

according to

the laundry

type.

1. Program

2. Course

•When Start/Pause button is pushed,

Coloureds program is automatically selected.

- By turning the Program dial, the program is

selected in orders of “Coloureds

Synthetic

Delicate

Wool

Hand Wash

Rinse+Spin

Spin

Pump

Whites”.

Regarding to the laundry type for each program

Please refer to the page13.

- Whites

- Coloureds

- Synthetic

- Delicate

- Wool

- Hand Wash

- Rinse+Spin

- Spin

- Pump

(Programme)

1. Power

2. Initial Program

Power

•Press the Power button to turn power on

and off

•To cancel the Time Delay function, it

can also be used.

•When the Power button is pushed, the

washer is ready for Coloureds program.

And the other initial conditions as follows.

•So, if you want to advance into the

washing cycle without selecting the

program, just push Start/Pause button

and then the washer will proceed.

Initial program

- Coloureds Program / Main wash /

Normal Rinse/800 rpm / 40˚C

ow to use washer

•If the washer has a trouble, the trouble

type is displayed.

“”: Sensing water pressure error

“”: Problem of overfilling water

“”: Door is not closed

“”: Over load in moter.

“”: Water inlet trouble

“”: Drainage trouble

“”: Imbalance trouble

“”: Water temperature trouble

If this error letters are displayed, please refer

to the troubleshooting page24 and follow the

guide.

Display

•When child lock is selected, the

“”is displayed.

•When time delay is selected, it shows

the remaining times to finish the selected

program.

•When washing cycle is completed,

“”is displayed on the “Multi

display”.

•During washing cycle, the remaining

washing time is displayed.

•Recommended program by

manufacturer.

- Whites : around 2 hours and 38 minutes

- Coloureds : around 1 hour and 55 minutes

- Synthetic : around 1 hour and 28 minutes

- Delicate : around 58 minutes

- Wool : around 58 minutes

- Hand Wash : around 57 minutes

- Rinse+ Spin : around 19 minutes

- Spin : around 11 minutes

- Pump : around 1 minute

•The washing time may vary by the

amount of laundry, water pressure,

water temperature and other washing

conditions.

•If the imbalance is detected or if the

suds removing program works, the

wash time shall be longer.

(Max. increasing time is 45minutes.)

1. Special function display

3. Completion of washing

4. Time left

2. Self diagnose display

Inhaltsverzeichnis

Andere LG Waschmaschine Handbücher

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

Bosch

Bosch WAN2829BSN Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung

Samsung

Samsung WF16J9800K Series Bedienungsanleitung