LG WD1070FH Bedienungsanleitung

Jumbo drum

LG’s jumbo drum can wash about 40% more per load than

conventional washing machine. A bigger durm improves the

wash performance.

More economical by Fuzzy Logic System

FUZZY Logic System detects the amount of load and water

temperature, and then determines the optimum water level

and washing time to minimize energy and water

consumption.

Child-Lock

The Child-Lock system has been developed to prevent

children from pressing any button to change the programme

during operation.

Low noise speed control system

By sensing the amount of load and balance, evenly

distributes load to minimize the spinning noise level.

Auto Restart

Although the washing machine is turned off by a power failure,

it restarts automatically in its stopped process when power is

supplied again. and it will be the same when the machine

unplugged in operation is plugged in again.

2. FEATURES & TECHNICAL EXPLANATION

2-1.FEATURES

40%

2-2.DETERMINE WASHING TIME BY FUZZY LOGIC

To get the best washing performance optimal time is determined by sensing of water temperature,

selected washing temperature and laundry amount.

2-3.WATER LEVEL CONTROL

This model adopts a pressure sensor which can sense the water level in the tub.

When the water level reaches to the preset level water supply is stopped, then washing program proceeds.

Spinning does not proceed until the water in the tub reduces to a certain level.

2-4.THE DOOR CAN NOT BE OPENED

While program is operating.

While Door Lock light turns on.

FUZZY

LOGIC

laundry

amount

selected

washing

temperature

water

temperature

washing time

rinse time

spin rhythm, time

the best

washing

performance

SENSING

PROCESSING

DETERMINATION

EFFECT

Before servicing ask troubles of customers

Check the adjustment(power supply is 220-240V, remove the transit bolts....)

Check the troubles referring to the trouble shooting.

Decide service steps referring to disassembly instructions.

And then, service and repair.

After servicing, operate the appliance whether it works OKor NOT.

STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE

BOLTS ON FLAT AND FIRM SURFACE HORIZONTAL

Remove the transit bolts Turn the leveling feet to

(4EA: )with supplied spanner. set the appliance horizontally.

Keep the transit bolts and

spanner for future use.

Insert the 4 caps provided

into the hole.

The appliance goes up by

rotating the feet clockwise.

The appliance come down by

rotating the feet counter

clockwise.

4. INSTALLATION

High

Low

HOW TO CONNECT INLET HOSE

Check that the rubber packing is inside of the

valve connector.

Connect the inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

CONNECT POWER PLUG

Make sure that the hose is not twisted.

The drain hose should be placed under 100cm from the floor.

Connect the power plug to the wall outlet. Avoid connecting several electric devices,

It may be the cause of the fire.

Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to In case of Coloureds program.

the outlet.

Connect the inlet hose.

Preparation for Press the power button. Press

the

START/PAUSE

washing. button.

Press the button TEMP Check if the drum rotates Check if water is supplied

and the present temperature will

clockwise and counterclockwise.

through the detergent dispenser.

be displayed.

Power off and then power on.

Check if the door can be

opened after Door Lock lamp

turns off.

Turn off Spin and Temp after

pressing the Start/Pause button

and start the machine again.

Check drain and Spin.

If SVC is needed during

check, remove

the remaining water by pulling

out the hose cap.

Check the water heating. Check automatic reverse Check the water supply.

turn.

Check drain and spin

Power off and open the

Water removal

door

6. WIRING DIAGRAM

(option)

GN/YL

■ WD(M)-8070F(H)B, WD(M)-1070(5)F(H)B, WD(M)-1170(5)F(H)B, WD(M)-1270(5)F(H)B, WD(M)-1370(5)F(H)B

■ WD-8070F(H), WD-1070(5)F(H)

❋

Pre Wash : If the laundry is heavily soiled, “Pre Wash”course is effective. Pre Wash is available in Coloureds, Whites and

Synthetic Program.

❋

Eco : By selecting Eco function, the water temperature is reduced and washing time is lengthened. So you can economize in your

consumption of energy.

❋

Rinse+ : If you wish to rinse more, the Rinse+ function will remove any trace of detergents.

❋

Bio : If you want to elimenate protein stains (milk, blood, chocolate...), you may select Bio function by pressing the option button.

❋

You can select Bio function and Eco function when temperature is higher than

60˚C

in Whites, Coloureds and Synthetic.

7. PROGRAM CHART

8-1. BEFORE SVC CHECKING

¡ÆBe careful of electric shock or disconnecting the parts while trouble shooting.

¡ÆVoltage of each terminal in 220-240V~ and DC while applying an electric current.

8-2. QC TEST MODE.

¤Pressing Spin, and Temp button simultaneously.

¤ŁPower supply ON with pressing upper two button. then buzzer sound twice.

¤ØPress the START/PAUSE button as follows.

¡aPress the START/PAUSE button more 4 times until stop spinning¡b

8-3. HOW TO KNOW THE WATER LEVEL FREQUENCY

ƒRPress the

Option and Spin button simultaneously.

ex) 241 : Water level frequency = 241¡¿10-1§

=24.1§

8. TROUBLE SHOOTING

The digits means water level frequency(10-1

)

Pressing number of

£START/PAUSE£button

Checking Point Display Status

None All lamps turn on

1 time Clockwise spin(right) Motor rpm(About 45)

2 times Low speed Spin Motor rpm(About 63~67)

3 times High speed Spin Motor rpm(About 79~85) : WD(M)-8070F(H)(B)

Motor rpm(About 100~106) : WD(M)-1070(5)F(H)(B)

Motor rpm(About 107~103) : WD(M)-1170(5)F(H)B

Motor rpm(About 114~120) : WD(M)-1270(5)F(H)B

Motor rpm(About 122~127) : WD(M)-1370(5)F(H)B

4 times Inlet valve for pre-wash operation Water level frequency(25~65)

5 times Inlet valve for main-wash operation Water level frequency(25~65)

Hot inlet valve in case of hot water fill

6 times Inlet valve for main-wash operation Water level frequency(25~65)

7 times Counterclockwise spin(left) Motor rpm(About 45)

8 times A Heater is in operation for 3 sec. Water Temperature

9 times Draining pump operation Water level frequency

10 times Auto off operation

8-4. ERROR DISPLAY.

If you press the Start/Pause button in error condition, any error except ‘’will disappear and the

machine will change into pause status.

In case of if the error is not resolved within 20 sec., and in case of other errors, if

the error is not resolved within 4 min., power will be turned off automatically and the error only will be

blinked. But in case of , power will not be turned off.

ERROR SYMPTOM CCAAUUSSEE

1WATER INLET §Water has not reached to the pre-set level within 4 min. since

ERROR inlet valve operated or water has not reached to the normal

level within 25 min.

2IMBALANCE §The appliance is tilted.

ERROR §Laundry is gatherd to one side.

§Non distributable things are put into the drum.

3DRAIN ERROR §Water has not drained enough within 5 min.

4OVER FLOW §Water is automatically being pumped out because too much

ERROR water is in the tub.

SENSOR PRESSURE

§The sensor pressure switch is out of order.

S/W ERROR

6DOOR OPEN §The

¡aStart/Pause¡b

button is pressed with the door open.

ERROR §The door switch is out of order.

7HEATING

ERROR §The thermistor is out of order.

8SENSOR §The connector (5pin, male, white) in the Wire Harness is not

ERROR connected to the connector (5 pin, female) of Hall Sensor in

the MOTOR.

ƒ_’reconnect or repair the contact in the connector

ERROR SYMPTOM CAUSE

•The electric contact between the connectors

(5 pin, male in the Wire Harness and 5 pin female in the Hall Sensor) is

bad or unstable.

ƒ_Reconnect or repair the contact in the connector

•The connector (6 pin, male, natural) in the Wire Harness is not

connected to the connector (6 pin, female, natural) of PWB

ASSY(Main) or the electric contact of connectors is bad/unstable.

ƒ_Reconnect or repair the contact in the connector

•The electric contact between the connectors¡a6 pin, male in the Wire

Harness and 6 pin female in the controller(Main)¡bis bad or unstable.

ƒ_Reconnect or repair the contact in the connector

•The Wire Harness between Hall Sensor in the MOTOR and PWB

ASSY(Main) is cut(open circuited).

ƒ_Repair/replace the damaged WIRE HARNESS

•The Hall Sensor is out of order/defective.

ƒ_Replace the Motor

•The controller(Main) is out of order/defective.

ƒ_Replace the PWB ASSY(Main)

•PWB ASSY(Main) is out of order

ƒ_Replace the PWB ASSY(Main)

•Winding in the MOTOR is short-circuited.

ƒ_Replace the MOTOR

•The Connector(3 pin, male, white) in the Wire Harness is not

connected to the Connector(3 pin, female, white) of MOTOR.

ƒ_Reconnect or repair the connector

•The electric contact between the connectors¡a3 pin, male, white in the

Wire Harness and 6 pin, female, white in the PWB ASSY(Main)¡bis bad

or unstable.

ƒ_Reconnect or repair the contact in the connector

•The Wire Harness between the MOTOR and PWB ASSY(Main) is

cut(open circuited).

ƒ_Repair the damaged(open-circuited) WIRE HARNESS

•The hall sensor is out of order/defective.

ƒ_Replace the PWB ASSY(Main)

SENSOR

ERROR

CURRENT

ERROR

LOCK

ERROR

Inhaltsverzeichnis

Andere LG Waschmaschine Handbücher

LG THDV11ST Series Bedienungsanleitung

LG T2312VSAV Bedienungsanleitung

LG TR1107AEP Bedienungsanleitung

LG FH4A8FDH9N Bedienungsanleitung

LG T2193EFHSK5 Bedienungsanleitung

LG F4V510 S Series Bedienungsanleitung

LG T2165VSA Series Bedienungsanleitung

LG F8092Q/TD Series Bedienungsanleitung

LG WM2301H Series Bedienungsanleitung

LG WF-T10(~3)0(~2 Bedienungsanleitung

LG WM4080H A Series Bedienungsanleitung

LG F4J8JHW Bedienungsanleitung

LG WD-16220FD Bedienungsanleitung

LG F1473ND Bedienungsanleitung

LG P7000R Bedienungsanleitung

LG T1993EFHSKL Bedienungsanleitung

LG WSC0805WH Bedienungsanleitung

LG WD-1255RD Bedienungsanleitung

LG WT7700H*A Bedienungsanleitung

LG F2514NTGW Bedienungsanleitung

LG FH0D7DD K 2 Series Bedienungsanleitung

LG F1243KDS Series Bedienungsanleitung

LG WD14030D Bedienungsanleitung

LG TH2518SSAV Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung

Samsung

Samsung WF16J9800K Series Bedienungsanleitung

Whirlpool

Whirlpool FRONT-LOADINGAUTOMATIC WASHER Bedienungsanleitung