LG WM2411HW Bedienungsanleitung
100
WASHING MACHINE
SERVICE MANUAL
READ THIS MANUAL CAREFULLY TO DIAGNOSE
PROBLEMS CORRECTLY BEFORE SERVICING THE UNIT.
MODEL : WM2411HW / WM2011HS
WM2011HW / WM1811CW
WM2432HW / WM2032HS
WM2032HW / WM1832CW
CAUTION
Website:http://www.LGEservice.com
E-mail:http://www.LGEservice.com/techsup.html
CONTENTS
1. SPECIFICATIONS .........................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4
3. PARTS IDENTIFICATION ............................................................................................................ 6
4. INSTALLATION............................................................................................................................. 7
5. OPERATION................................................................................................................................10
6. WIRING DIAGRAM / PROGRAM CHART...................................................................................13
7. TROUBLESHOOTING.................................................................................................................15
7-1. BEFORE PERFORMING SERVICE...................................................................................15
7-2. QC TEST MODE.................................................................................................................15
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY......................................................15
7-4. ERROR DISPLAY...............................................................................................................16
8. ERROR DIAGNOSIS AND CHECK LIST....................................................................................18
8-1. DIAGNOSIS AND SOLUTION FOR ABNORMAL OPERATION ........................................18
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING ..............................................................21
9. DISASSEMBLY INSTRUCTIONS ...............................................................................................28
10. EXPLODED VIEW.....................................................................................................................36
10-1. CABINET & CONTROL PANEL ASSEMBLY....................................................................36
10-2. DRUM & TUB ASSEMBLY................................................................................................37
10-3. DISPENSER ASSEMBLY.................................................................................................38
3
1. SPECIFICATIONS
ITEM WM2411HW WM2011HS / WM2011HW WM1811CW
WM2432HW WM2032HS / WM2032HW WM1832CW
POWER SUPPLY 120V ~ 60Hz
PRODUCT WEIGHT 190 lbs. (86 kg)
WASHING 280W 235W
DRAIN MOTOR 80W
WASH HEATER 1000W
-
WASH 42 rpm
SPIN 0-1200 rpm 0-1000 rpm 0-900 rpm
CYCLES 9 7 5
WASH / RINSE TEMPERATURES 6 5 4
SPIN SPEEDS 6 5 5
OPTIONS
Prewash, Stain Cycle, Quick Cycle, Extra Rinse, Rinse+Spin, Delay Wash
CUSTOM PROGRAM Incorporated
WATER CIRCULATION Incorporated
-
OPERATIONAL WATER PRESSURE 4.5
-
145 psi (30-1000 kPa)
CONTROL TYPE Electronic
WASH CAPACITY 3.22 cu.ft (3.72 cu.ft.IEC)
DIMENSIONS 27”(W) X 29
-
1/2”(D) X 42
-
3/4”(H), 49
-
4/5”(D, door open)
DELAY WASH up to 19 hours up to 12 hours up to 9 hours
DOOR SWITCH TYPE PTC + Solenoid
WATER LEVEL 7 steps (by sensor)
LAUNDRY LOAD SENSING Incorporated
ERROR DIAGNOSIS Incorporated
AUTO POWER OFF Incorporated
CHILD LOCK Incorporated
ELECTRIC
POWER
CONSUMPTION
REVOLUTION
SPEED
4
2. FEATURES & TECHNICAL EXPLANATION
2-1.FEATURES
Direct Drive System
The advanced Brushless DC motor directly drives the drum
without belt and pulley.
Tilted Drum and Extra Large Door Opening
The tilted drum and extra large door opening make it possible
to load and unload easily.
Water Circulation (WM2411HW, WM2011HS, WM2011HW,
WM2432HW, WM2032HS, WM2032HW)
Spray detergent solution and water onto the load repeatedly.
Clothes are soaked more quickly and thoroughly during the wash cycle.
Detergent suds are eliminated more easily by the water shower
during rinse cycle. The water circulation system uses both
water and detergent more efficiently.
RollerJets (WM2411HW, WM2011HS, WM2011HW,
WM2432HW, WM2032HS, WM2032HW)
The washing ball enhances wash performance and reduces
damage to clothing.
The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
Built-in Heater (WM2411HW, WM2011HS, WM2011HW,
WM2432HW, WM2032HS, WM2032HW)
The internal heater automatically heats the water to the optimum
temperature on selected cycles.
Child Lock
The Child lock feature prevents children from pressing any buttons
to change the settings during operation.
5
2-2.FUZZY LOGIC WASHING TIME OPTIMIZATION
To get the best washing performance, optimal time is determined by the water temperature,
the selected washing temperature, and the size of the load.
2-3.WATER LEVEL CONTROL
This model incorporates a pressure sensor which can sense the water level in the tub.
The water supply is stopped when the water level reaches the preset level, the washing
program then proceeds.
Spinning does not proceed until the water in the tub drains to a certain level.
2-4.DOOR CONTROL
The door can be opened by pulling the door handle whenever washer is not in operation.
When the cycle is completed, the DOOR LOCKED light will turn off.
If a power failure has occurred while in operation, the door will lock for 5 minutes.
Clicking sounds can be heard when the door is locked / unlocked.
FUZZY
LOGIC
load
size
selected
washing
temperature
water
temperature
washing time
rinsing time
spin rhythm, time
the best
washing
performance
SENSING
PROCESSING
DETERMINATION
EFFECT
6
3. PARTS IDENTIFICATION
ACCESSORIES
• If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
authorized service
technician in order to
avoid a hazard.
7
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the transit bolts Turn the leveling feet to adjust
(4 EA: ) with the supplied wrench. the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
The appliance goes up by
rotating the feet clockwise.
The appliance come down by
rotating the feet counterclockwise.
4. INSTALLATION
8
HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leaks.
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
The end of the drain hose should be placed less than 96
”
from the floor.
Connect the power plug to the wall outlet. Avoid connecting several electric devices, as
doing so may cause a fire.
Make sure that the hose is not twisted. Avoid submerging the end of the hose.
9
TEST OPERATION
Connect the power plug to
the outlet.
Connect the inlet hose.
Press the POWER button twice
to restart.
Press the SPIN SPEED button.
Press the START / PAUSE button.
Check the drain and spin
functions.
Listen for clicking sounds to
determine if the door is
unlocking.
Listen for clicking sounds to
determine if the door has
locked.
If SVC is required, remove the
remaining water in the tub, by
pulling out the drain plug.
Preparation for Press the POWER button. Press
the
Start/Pause
washing. button.
Press the WASH / RINSE button Make sure that the drum rotates Verify that if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Check the water heating Check the automatic Check the water supply.
function. reversing rotation of the
drum.
Check the drain and spin
Press the
Water removal
functions.
START / PAUSE button.
10
5. OPERATION
• Use this button to turn the power
On / Off.
• Rotate the Cycle selector
knob to select the cycle
designed for different
types of fabric and soil
levels.
•
Allows you to store a customized wash cycle for future use.
• To create a Custom Program :
1) Select a cycle.
2) Select the other desired Wash / Rinse Temp., Spin Speed, Soil Level.
3) Select the desired Options.
4) Press and hold the Custom Program button for 3 seconds (2 beep sounds).
5) Press the Start / Pause button.
The Custom Program is now stored for future use.
• To reuse the program, select Custom Program and press Start / Pause.
• Lights whenever the door is locked.
• The door can be unlocked by pressing
the Start / Pause button to stop the
washer.
• Choose High / Low /
• Select a water temperature based on
load you are washing.
• To change the spin speed, select the
Spin Speed button until the desired s
displayed.
• To change the soil level, select the So
button until the desired setting is disp
Andere Handbücher für WM2411HW
2
Dieses Handbuch passt für folgende Modelle
21
Inhaltsverzeichnis
Andere LG Waschmaschine Handbücher
LG
LG F4J7JS(P)(0~9)W/S Bedienungsanleitung
LG
LG FH0C7FD3 Bedienungsanleitung
LG
LG WV5-1208W Bedienungsanleitung
LG
LG F4J6VY Series Bedienungsanleitung
LG
LG F14U1T Series Bedienungsanleitung
LG
LG WD14130RD6 Bedienungsanleitung
LG
LG WD-D1217RD6 Bedienungsanleitung
LG
LG Operating Guide Bedienungsanleitung
LG
LG WD-P1411RD6 Bedienungsanleitung
LG
LG WD-1255RD Bedienungsanleitung
LG
LG F2J7HM Series Bedienungsanleitung
LG
LG WM2150H Series Bedienungsanleitung
LG
LG WM3370H Bedienungsanleitung
LG
LG M2487HWMA Bedienungsanleitung
LG
LG WM3001HRA Installationsanleitung
LG
LG WM20WV26W Bedienungsanleitung
LG
LG WFT11G00TED Bedienungsanleitung
LG
LG T7588NEHPA Bedienungsanleitung
LG
LG WD-13060RD Bedienungsanleitung
LG
LG F2V9GWP Series Bedienungsanleitung
