LG WTG1434 HF Series Bedienungsanleitung

MODEL : WTG1434*HF, WTG1234*F,WTG1034*F

WASHING MACHINE

SERVICE MANUAL

CAUTION

Before servicing the washer, Read the safety precautions in the manual.

SAFETY PRECAUTION!

IMPORTANT SAFETY NOTICE!

QDISASSEMBLEPOWER CORD BEFORE SERVING

QRECONNECT ALL GROUNDING DEVICES

This service information is intended for individuals

possessing adequate backgrounds of electrical,

electronic and mechanical experience.

Any attempt to repair this appliance may result in

personal injury or property damage.

The manufacturer or seller can not beresponsible

for the interpretation of this information, nor can it

assume any liability in connection with its use.

CONTENTS

1.Specifications .............................................................................................................................. 3

2.Installation Instructions ................................................................................................................ 4

2-1.Installation Place Requirements................................................................................................ 4

2-2.Connecting the Supply Hose..................................................................................................... 5

2-3.Installing the Drain Hose ........................................................................................................... 7

2-4 Leveling the Appliance ............................................................................................................... 9

2-5.Assembling the Anti-Rat Cover (Optional)................................................................................. 9

3.OPERATION...............................................................................................................................10

3-1.Using the Appliance................................................................................................................. 10

3-2.Sorting Laundry....................................................................................................................... 11

3-3.Adding Cleaning Products....................................................................................................... 12

3-4.Function of Each Button.......................................................................................................... 14

3-5.Washing Programs.................................................................................................................. 16

3-6.Other Functions....................................................................................................................... 18

3-7.Cleaning and Maintenance...................................................................................................... 26

4.Service Information

4-1.Wiring Diagram........................................................................................................................ 30

4-2.Main PCB Picture.................................................................................................................... 32

4-3.Disassembly Instruction .......................................................................................................... 35

4-4.How to use Test Mode............................................................................................................. 42

4-5.Trouble Shooting byCommon Washing Problems.................................................................. 43

4-6.Trouble Shooting With Error Code .......................................................................................... 44

4-7 .How to Diagnose and Repair bySymptom ............................................................................ 47

5.Exploded View............................................................................................................................ 56

1. SPECIFICATIONS

Model WTG1434*HF, WTG1234*F, WTG1034*F

POWER SOURCE Refer to rating label on the backof Washer

INPUT Refer to rating label on the backof Washer

CAPACITYRefer to rating label on the backof Washer

INNER TUB Stainless

INLET WATER

PRESSURE 0.3kgf/cm2~ 8.0kgf/cm2

SPIN SPEED 950 rpm

DIM. Refer to rating label on the backof Washer

WEIGHT Refer to rating label on the backof Washer

*PROGRAM

Cotton Wash, Stain Care, Allergy Care, Extra Rinse, QuickWash,

Eco Cotton, Pre Wash+Cotton, Duvet, Delicates, Sports Wear, TubClean

Download Cycle

WATER LEVEL 10 Stages

RESERVATION Available for 3~18 Hr

UNBALANCE

SWITCH B.PSensor

LID INTERLOCK

SWITCH Magnet Sensor

CHILD LOCK Applied

SOFTENER

DISPENSER Applied

DETERGENT

DISPENSER Applied

BLEACH INILET Applied

AUTO POWER OFF Applied

Smart RinseTM

with Jet Spray Applied

Heater Applied Unapplied

* Program can be different according to the model.

2-1. Installation Place Requirements

2. INSTALLATION INSTRUCTIONS

Location

10 cm 2 cm 2 cm

Level floor : Allowable slope under the entire

appliance is 1°.

Power outlet : Must be within 1.5 meters of

either side of the location of the appliance.

ҟDo not overload the outlet with more than one

appliance.

Additional Clearance : For the wall, 10 cm:

rear/2 cm: right & left side.

ҟDo not place or store laundry products on top

of the appliance at any time. These products

may damage the finish or controls.

WARNING

ҟThe plug must be plugged into an appropriate

outlet that is properly installed and grounded

in accordance with all local codes and

ordinances.

Positioning

ҟInstall the appliance on a flat hard floor.

ҟMake sure that air circulation around the

appliance is not impeded by carpets, rugs,

etc.

ҟNever try to correct any unevenness in the

floor with pieces of wood, cardboard or similar

materials under the appliance.

ҟIf it is impossible to avoid positioning the

appliance next to a gas cooker or coal burning

stove, an insulation (85x60 cm) covered with

aluminum foil on the side facing the cooker or

stove must be inserted between the two

appliances.

ҟDo not install the appliance in rooms where

freezing temperatures may occur. Frozen

hoses may burst under pressure. The

reliability of the electronic control unit may be

impaired at temperatures below freezing point.

ҟEnsure that when the appliance is installed, it

is easily accessible for an engineer in the

event of a breakdown.

ҟIf the appliance is delivered in winter and

temperatures are below freezing, place the

appliance at room temperature for a few hours

before putting it into operation.

WARNING

ҟThis equipment is not designed for maritime

use or for use in mobile installations such as

caravans, aircraft etc.

Electrical Connection

ҟDo not use an extension cord or double

adapter.

ҟAlways unplug the appliance and turn off the

water supply after use.

ҟConnect the appliance to an earthed socket in

accordance with current wiring regulations.

ҟThe appliance must be positioned so that the

plug is easily accessible.

ҟRepairs to the appliance must only be carried

out by qualified personnel. Repairs carried out

by inexperienced persons may cause injury or

serious malfunctioning. Contact your local

service centre.

2-2. Connecting the Supply Hose

ҟBefore connecting the water supply hose to

the water tap, check the hose type and then

choose the correct instruction.

ҟThe water supply hose supplied may vary

from country to country. Make sure to connect

the blue supply hose to the COLD water tap,

and the orange supply hose to the HOT water

tap.

ҟWater supply pressure must be between 30

kPa and 800 kPa (0.3 - 8.0 kgf / cm²).

ҟDo not overtighten the water supply hose.

ҟIf the water supply pressure is more than 800

kPa, a decompression device should be

installed.

ҟPeriodically check the condition of the hose

and replace the hose if necessary.

Checking the Rubber Seal on the

Supply Hose

Two rubber seals are supplied with the water

supply hoses. They are used for preventing

water leaks. Make sure the connection to taps

is sufficiently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw the hose connector onto the water

supply tap.

Connecting Screw-Type Hose to Tap

Without Thread

1Loose the four fixing screws.

Upper

connector

Rubber

seal

Fixing screw

2Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

3Push the adapter onto the end of the tap so

that the rubber seal forms a watertight

connection. Tighten the four fixing screws.

4Push the supply hose vertically upwards so

that the rubber seal within the hose can

adhere completely to the tap and then

tighten it by screwing it to the right.

Plate

Supply

hose

Connecting One Touch Type Hose to

Tap Without Thread

1Unscrew the adapter ring plate and loose

the four fixing screws.

Ring plate

2Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

3Push the adapter onto the end of the tap so

that the rubber seal forms a watertight

connection. Tighten the four fixing screws

and the adapter ring plate.

4Pull the connector latch plate down, push

the supply hose onto the adapter, and

release the connector latch plate. Make

sure the adapter locks into place.

Latch plate

NOTE

ҟAfter connecting the supply hose to the water

tap, turn on the water tap to flush out foreign

substances (dirt, sand, sawdust, and etc.) in

the water lines. Let the water drain into a

bucket, and check the water temperature.

Connecting Hose to Appliance

Pump Model

Attach the hot water line to the hot water inlet

on the back of the washing machine. Attach the

cold water line to the cold water inlet on the

back of the washing machine.

NOTE

ҟAfter completing connection, if water leaks

from the hose, repeat the same steps. Use

the most conventional type of tap for the water

supply. In case the tap is square or too big,

remove the guide plate before inserting the

tap into the adaptor.

Before connecting the drain hose, check your

drain hose model and choose the correct

instruction.

35" ~47" ( 0.9~1.2m)

Cable Tie Cable Tie

35" ~47" ( 0.9~1.2m)

 Connect the drain hose to the outlet of the drain



pump located at the rear of the washing machine.

Attach the clip to the drain hose.

And then push it toward the body of the washing

machine as indicated bythe arrow.



The drain hose should always beproperly

secured to the drain or standpipe. Failure to

secure

the drain hose properly can result in flooding and

property damage.

The end of the drain hose should beplaced 39"

(99 cm) above the floor.

The drain must beinstalled in accordance with

any applicable local codes and regulations.

Makesure that the water lines are not stretched,

pinched, crushed, or kinked.

Donot insert the drain hose more than 12” (30

cm) into the drain pipe to avoid siphoning and

odor build-up.



Check that the drain hose is hung up over the

edge of the laundry tub.

Donot use an extension hose.

2-3. Installing the Drain Hose

Non-pump Model

1Push the elbow hose toward the body of the

washing machine.

2To change the direction of the hose, pull out

the elbow hose and change the direction.

Repeat Step 2.

Positioning the Drain Hose

ҟThe length of the drain hose should not

exceed 3 m.

ҟDo not place the drain hose on a threshhold

of 6 cm or more.

max. 6 cm

max. 3 m

ҟMake sure the drain hose is not kinked.

ҟThe outlet of the drain hose should not be

submerged in water.

ҟMake sure the drain hose is not kinked.

If the floor is uneven, turn the adjustable feet as

required (Do not insert pieces of wood etc.

under the feet). Make sure that all four feet are

stable and resting on the floor and then check

that the appliance is perfectly level.

Diagonal Check

ҟWhen pushing down the edges of the

appliance top plate diagonally, the appliance

should not move up and down at all (Check

both directions). If the appliance rocks when

pushing the machine top plate diagonally,

adjust the feet again.

NOTE

ҟTimber or suspended type flooring may

contribute to excessive vibration and

unbalance.

ҟIf the washing machine is installed on a raised

platform, it must be securely fastened in order

to eliminate the risk of falling off.

ҟIf the washing machine is installed on a

uneven, weak or tilted floor causing excessive

vibration, spin failure or “UE” error can occur.

It must be placed on a firm and level floor to

prevent spin failure.

Insert the Anti-Rat cover to the assembling hole

from the front or back of the washing machine.

Type 1

Type 2

2-4. Leveling the Appliance 2-5. Assembling the Anti-Rat

Cover (Optional)

3-1. Using the Appliance

3. OPERATING

Before the first wash, select a washing

programme (Normal, add a half load of

detergent), allow the washing machine to wash

without clothing. This will remove residue and

water from the drum that may have been left

during manufacturing.

1Sort laundry and load items.

ҟSort laundry by fabric type, soil level,

colour and load size as needed. Open the

door and load items into the washing

machine.

2Add cleaning products and/or detergent and

softener.

ҟAdd the proper amount of detergent to the

detergent dispenser drawer. If desired,

add bleach or fabric softener to the

appropriate areas of the dispenser.

3Turn on the washing machine.

ҟPress the Power button to turn on the

washing machine.

4Choose the desired wash programme.

ҟPress the Programa button repeatedly

until the desired programme is selected.

5Begin programme.

ҟPress the Start/Pause button to begin the

programme. The washing machine will

agitate briefly without water to measure

the weight of the load. If the Start/Pause

button is not pressed within 60 minutes,

the washing machine will shut off and all

settings will be lost.

6End of programme.

ҟWhen the programme is finished, a

melody will sound. Immediately remove

your clothing from the washing machine to

reduce wrinkling.

NOTE

ҟThe Auto Restart function allows the

programme to restart by itself in case of

power failure. lt does from the stage where it

stopped.

Andere Handbücher für WTG1434 HF Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Waschmaschine Handbücher

LG F1496ADT4 Bedienungsanleitung

LG F1450HPRB Bedienungsanleitung

LG WD-1050FH Bedienungsanleitung

LG F4J9JH Series Bedienungsanleitung

LG WD-1435RD Bedienungsanleitung

LG F1607BD Bedienungsanleitung

LG WFT15C65EF Bedienungsanleitung

LG FH4U1JBHK1N Bedienungsanleitung

LG WM3499HVA Gebrauchsanweisung

LG F70E1UDNK12 Bedienungsanleitung

LG F16WD128GH Bedienungsanleitung

LG WM3070HRA Bedienungsanleitung

LG T2311VS2M Bedienungsanleitung

LG WM4200HBA.ABLEEUS Bedienungsanleitung

LG T2175VS2M Bedienungsanleitung

LG F8056QD Bedienungsanleitung

LG WM3988H*A Series Bedienungsanleitung

LG F14A8FD Series Bedienungsanleitung

LG WM5000HVA Bedienungsanleitung

LG FWV7 TSE Series Bedienungsanleitung

LG F4J8VH Series Bedienungsanleitung

LG TG2402NTW Bedienungsanleitung

LG F4J5VNP Series Bedienungsanleitung

LG WTR24DHM Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung

Samsung

Samsung WF16J9800K Series Bedienungsanleitung

Whirlpool

Whirlpool FRONT-LOADINGAUTOMATIC WASHER Bedienungsanleitung