Liebert 350-500 VA Bedienungsanleitung

POWER AVAILABILITY

PowerSure™ PST

USER MANUAL

350-500 VA

120V

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 1

INTRODUCTION AND SYSTEM DESCRIPTION . . . . . . . . . . . . . . . 4

Top and Side Views of UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

MAJOR COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Transient Voltage Surge Suppression (TVSS) & EMI / RFI

Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Transfer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

WHAT’SINCLUDED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

CONTROLS AND INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . 10

ON/OFF/Alarm Silence Button . . . . . . . . . . . . . . . . . . . . . . . . 10

Status Indicators: Utility/Battery, Fault . . . . . . . . . . . . . . . . . 11

Utility/Battery Indicator (Green) . . . . . . . . . . . . . . . . . . . . . . . . . 11

Site Wiring Fault Indicator (Amber) . . . . . . . . . . . . . . . . . . . . . . . 11

Fault Indicator (Red) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Location and Status of Indicators . . . . . . . . . . . . . . . . . . . . . . . . . 11

MODES OF OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Normal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Battery Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

COMMUNICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

USB Interface Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Data Line Protection Connectors . . . . . . . . . . . . . . . . . . . . . . . 13

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cleaning the UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Maintaining Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Guide to Status Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Battery Run Times. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Product Warranty Registration. . . . . . . . . . . . . . . . . . . . . . . . . 18

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety instructions that should be fol-

lowed during the installation and maintenance of the Uninterruptible

Power System (UPS) and its batteries. Please read this manual thor-

oughly before attempting to install or operate this UPS.

Read all safety, installation, and operating instructions before operat-

ing the UPS. Adhere to all warnings on the unit and in this manual.

Follow all operating and user instructions.

This equipment is designed for Commercial, Industrial or Residential

use. Liebert Corporation neither recommends nor knowingly sells this

product for use in life support applications or with other designated

critical devices.

This equipment can be installed and operated by individuals without

previous training.

!WARNING

SAFETY PRECAUTIONS

• To prevent the risk of fire or electric shock, install the UPS

in a temperature and humidity controlled room, free of

conductive contaminants, moisture, flammable liquids,

gases and corrosive substances.

• Operate the UPS only from a properly grounded (earthed)

120VAC, 60Hz AC supply.

• To reduce the risk of electric shock, do not remove the

cover, as it has no user-serviceable parts inside except the

internal battery pack. Some components are live, even

when AC power is disconnected. For service, contact a

qualified technician.

Provided is a USB cable for connection to a computer. Store in a safe

place if not required at this time.

!CAUTION

Although your UPS has been designed and manufactured to

assure personal safety, improper use may result in electrical

shock or fire. To ensure safety, please observe the following

rules:

• Turn off and unplug your UPS before cleaning. Do not use

liquid or aerosol cleaners. A dry cloth is recommended to

remove dust from the surface of your UPS.

• Do not install or operate your UPS in or near water.

• Do not place your UPS on an unstable cart, stand or table.

• Do not place your UPS in direct sunlight or near heat

emitting sources.

• Never block or insert any objects into the ventilation holes

or other openings of the UPS. Keep all vents free of dust

accumulation that could restrict airflow.

• Do not place UPS power cord in any area where it may be

damaged by heavy objects.

• Placing magnetic storage on the top of the UPS may result

in data corruption.

!CAUTION

If your UPS demonstrates any of the following conditions,

turn off and unplug your UPS from the outlet and contact

your local dealer, Liebert representative, or Liebert

Worldwide Support Group.

• The power cord is damaged.

• Liquid has been spilled on the UPS.

• The circuit breaker or fuse opens frequently.

• The UPS does not operate in accordance with the user

manual.

CONDITIONS OF USE: The input receptacle must be within 6 feet

(1.8 meters) of the UPS.

Your UPS provides conditioned power to connected equipment. Maxi-

mum load must not exceed that shown on UPS rating label. If uncer-

tain, consult your local dealer, Liebert representative or the Liebert

Worldwide Support Group.

The equipment can be installed and operated by individuals without

previous training.

!CAUTION

BATTERY HANDLING PRECAUTIONS

Servicing of batteries should be performed or supervised by

personnel knowledgeable of batteries and required

precautions. Keep unauthorized personnel away from the

batteries.

A battery can present a risk of electrical shock and high

short-circuit current. The following precautions should be

observed when working on batteries:

• Remove watches, rings, and other metal objects.

• Use tools with insulated handles.

• Do not dispose battery or batteries in a fire. The battery

may explode.

• Do not open or mutilate the battery or batteries. Released

electrolyte is harmful to skin and eyes. It may be toxic.

• When replacing the battery, use same number and type of

battery as the suitable recommended type of battery listed

in specification table in back of this manual.

• Handle, transport and recycle batteries in accordance with

local regulations.

INTRODUCTION AND SYSTEM DESCRIPTION

Congratulations on your choice of the Liebert PowerSure™ PST Unin-

terruptible Power System (UPS). It provides filtered AC power to sen-

sitive electronic equipment and other critical loads.

The PowerSure PST is an off-line UPS designed for desktop applica-

tions. It provides perfect one-to-one power protection for electronic

equipment such as PCs, point-of-sale displays, home office equipment

and similar electronic gear. The PowerSure PST is available in two (2)

sizes: 350 and 500VA at 120VAC.

PowerSure PST models are available for 120VAC and 230VAC supply

voltages and loads. Please verify that this model matches your AC

Utility and load voltage requirements.

NOTE

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

This equipment uses, generates and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference with

radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the UPS and the receiver.

• Connect the UPS into an outlet on a circuit different from

the one on which the receiver is connected.

Top and Side Views of UPS

Refer to Bottom for

Cautionary Markings

Orange output receptacles

Battery backup + surge protection

Black output receptacles

Surge protection only

USB

interface

port

Data Line

Protection

Connectors

(IN, OUT, OUT)

Phone/fax/

modem/DSL

Circuit Protector

TOP OF UPS

LEFT SIDE OF UPS

RIGHT SIDE OF UPS

Power Cord

6.5 ft (2 m)

Utility/Battery Indicator

(Green)

Site Wiring Fault

Indicator (Amber)

Fault Indicator (Red)

MAJOR COMPONENTS

Transient Voltage Surge Suppression (TVSS) & EMI / RFI

Filters

These UPS components provide surge protection and filter electro-

magnetic interference (EMI) and radio frequency interference (RFI).

They minimize surges or interference present in the utility line and

keep the sensitive equipment protected.

Transfer Switch

In Normal mode the Transfer Switch passes utility AC power to the

connected load. When input utility voltage or frequency is outside

acceptable limits, the transfer switch activates and transfers the UPS

to battery.

Battery Charger

In Normal mode, the Battery Charger converts utility AC power into

regulated DC power to float charge the battery. It is continuously

charging the battery whenever the UPS is plugged into a power outlet

and utility power is within acceptable limits—even if the UPS is

turned OFF.

Battery

The PowerSure PST utilizes a valve-regulated, nonspillable, lead acid

battery. To optimize battery life, operate the UPS in an ambient tem-

perature of 68°-77°F (20°-25°C).

Inverter

When utility power fails, the Inverter draws energy from the battery

and inverts it into a regulated stepped sinewave supplying power for

equipment connected to the orange receptacles.

Input Output

TVSS &

EMI/RFI

Filters

Battery

Charger Battery Inverter

Transfer

Switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Liebert UPS Handbücher

Liebert

Liebert UPStation S VCR232C Kurzanleitung

Liebert

Liebert PowerSure PS250-60S Bedienungsanleitung

Liebert

Liebert GXT2 - 3X1 Bedienungsanleitung

Liebert

Liebert GXT Bedienungsanleitung

Liebert

Liebert PSITM Bedienungsanleitung

Liebert

Liebert Series 300 Gebrauchsanweisung

Liebert

Liebert NfinityTM Bedienungsanleitung

Liebert

Liebert NXC Bedienungsanleitung

Liebert

Liebert PowerSure PSI 1000 - 3000VA 60 Hz 120V Bedienungsanleitung

Liebert

Liebert GXT240VBATT Bedienungsanleitung

Liebert

Liebert Nfinity 208 V / 240 V 60Hz Bedienungsanleitung

Liebert

Liebert PowerSure PSA 350VA to 1000VA Bedienungsanleitung

Liebert

Liebert 700-3000 VA Bedienungsanleitung

Liebert

Liebert Series 300 Bedienungsanleitung

Liebert

Liebert UPSTATION GXT3X1-6000 Bedienungsanleitung

Liebert

Liebert PSP Bedienungsanleitung

Liebert

Liebert SERIES 610 Bedienungsanleitung

Liebert

Liebert GXT3 RT120 Bedienungsanleitung

Liebert

Liebert UPStation GXT Bedienungsanleitung

Liebert

Liebert UPStation GXT 2U Bedienungsanleitung

Liebert

Liebert UPStation GXT 2U Bedienungsanleitung

Liebert

Liebert UHA1R-0100 Bedienungsanleitung

Liebert

Liebert UD1400 Bedienungsanleitung

Liebert

Liebert NXL Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung