LIFX Neon Flex Technisches Datenblatt
Download the
LIFX app to begin.
Get started
I'm not reading this whole thing
1 Turn on your LIFX light
2 Download and login to
the LIFX app
3 Press the + button to add
your product.
Technical Stu:
You'll need a device running iOS 14.0+ or Android
8.0+ and a 2.4 GHz Wi-Fi internet connection.
Not sure what that is? See the page ‘Your Wi-Fi’.
We get it—Don't worry, these are the basics...
Connect all the pieces
in this kit together
securely then plug it
into your power outlet.
Want install tips & videos?
Text here annoyingly small?
How do I turn it on?
Be safe! Make sure you read the
cautions notes.
S C A N F O R
SETUP VIDEOS,
INSPIRATION
PICS, DIGITAL
MANUALS &
MORE
Press the button
for 5 seconds. You
might do this if the
flex isn't lighting up
or counting pieces.
This puts it back
to original factory
settings.
Need to
reset?
Press the button on the
control in for 2-3 seconds.
A light will run down the full
length of the Neon Flex as it
detects it. If it was connected
before you plugged in the
controller, it will automatically
run this count.
Did you connect your
flex after powering
the control?
Cautions:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
• Do not mount or place near
gas or electric heaters,
fireplace, candles, or other
similar sources of heat.
• Do not secure the wiring
of the product with staples
or nails, or place on sharp
hooks or nails.
• Do not use this product for
other than its intended use.
• Do not hang ornaments or
other objects from the cord,
wire, or flex.
• Do not close doors or
windows on the product or
extension cords as this may
damage the wire insulation.
• Do not use with an extension
cord unless the plug can be
fully inserted. Do not alter or
replace the plug.
• This product should be
installed out of the reach of
children.
• Do not secure Neon Flex
using nails, staples or other
sharp, conducting materials
that could pierce the casing.
• DO NOT DAMAGE THE WIRE.
Warning: To avoid risk of
shock, always make sure the
product is unplugged from
the electrical outlet before
assembling, disassembling,
installing, relocating, extending,
servicing or cleaning it.
1 Power on your LIFX light
2 Open the Apple Home App
3 Use the camera on your iOS
device to scan the Homekit
QR code on the back of this
manual.
Open the Apple Home App and
click or “add accessory”.
Setting up using Apple Home™
on iOS?
Keep your user manual for the HomeKit
QR code in the future.
OR
With Apple HomeKit technology, you
can control your home’s lighting,
locks, and more from your iPhone®,
iPad®, HomePod mini®, Apple
Watch®, or Mac®.
Apple, Apple
Home, Apple
Watch, HomeKit,
HomePod,
HomePod mini,
iPad, iPad Air,
iPhone, and tvOS
are trademarks
of Apple Inc.,
registered in the
U.S. and other
countries and
regions.
Technical Requirements:
To control this HomeKit-enabled accessory, the
latest version of iOS or iPadOS is recommended.
An internet / data connection is required while
setting up Apple HomeKit as you will need to
connect your LIFX product to your Wi-Fi access
point / router. Controlling this HomeKit-enabled
accessory automatically and away from home
requires a HomePod, HomePod mini, or Apple
TV set up as a home hub. It is recommended
that you update to the latest software and
operating system.
Use of the Works with Apple badge means
that an accessory has been designed to work
specifically with the technology identified
in the badge and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards.
Your Wi-Fi:
LIFX lights connect to your 2.4 Ghz Wi-Fi
frequency network, which all routers can be set
up for. This oers better range and stability for
devices. You may also have a 5 Ghz connection,
so if you’re not sure which is which, check the
current Wi-Fi you’re connected to by pressing the
Wi-Fi icon on your phone while connected and
look at the listed details to find the frequency.
Connection troubles?
Wi-Fi waves can be interrupted by materials like
concrete or mirrors. If your signal is weak, try moving
your product near your router for setup as it will
need a stable connection to complete. If you have
lots of devices connected to your router, check the
recommended amount. Some routers can handle
many devices, others can only support a few.
802.11 b/g/nRouter WPA2 security compatible
Quick FAQS
How do I reset a light if I need to?
To take a light back to it’s original settings, turn it o
and on at the switch 5 times, at a rate of about one
switch a second (not too fast). The lights will cycle
through four colors and stop on white when the reset
has been successful. This is how you would remove a
light from a network to then add it to a new one.
I’ve set up a new network / changed my password,
how do I re-connect my lights ?
If you’ve changed your Wi-Fi password or set up a
new router with a new password, you’ll need to reset
your lights (as above) and reconnect them with the
new Wi-Fi information and security. If you’ve moved
house but your network is named the same and has
the same password, your lights are all ready to go!
Need more help?
Visit the LIFX Help Center at support.lifx.com
Regulations &
Compliance.
Changes & modification
Changes or modifications made to this
device may void certification of the
device. Changes or modifications made
to this unit not expressly approved by the
party responsible for compliance could
void the user‘s authority to operate the
equipment.
Frequency Information
Frequency Range (Europe & Australia):
2412-2472 MHz;
Maximum radio-frequency power
transmitted: 18.75 dBm;
Modulation type : IEEE 802.11 b/g/n20
Installation requirements
& recommendation
This device should only be installed in light
fittings and fixtures that are designed
to accept each fitting. Lamps, fittings
and fixtures that are designed to accept
smaller or lower wattage light bulbs
may result in the LIFX bulb operating
below its optimal capacity. For optimal
performance it is recommended that LIFX
bulbs be fitted into fixtures that provide
sucient air flow through and around
the bulb. It is recommended that the LIFX
bulb be installed away from other devices
designed to receive or transmit radio
signals. It is recommended LIFX bulb/s
be installed and operated at a minimum
distance of 30 cm from the body. For
lamps with a weight significantly higher
than that of lamps for which they are a
replacement, attention should be drawn
to the fact that the increased weight may
reduce the mechanical stability of certain
luminaires and may impair contact
making and lamp retention.
Interference
LIFX has been designed to minimise
interference with other radio, broadcast
or receiving devices. The manufacturer
is not responsible for any interference
caused as a result of modifications to
the product or by failure to adhere to
the recommendations in this document
and at support.lifx.com. This device
generates radio frequency energy and,
if not installed in accordance with the
“recommended installation requirements”
may cause harmful interference to
radio communication devices. If the
device is causing radio interference it is
recommended that the user try:
a. relocating the device to a dierent place;
b. adjust the antenna on the receiving
device;
c. consult a technician experienced in radio
interference.
Inhaltsverzeichnis
Andere LIFX Beleuchtungsausrüstung Handbücher
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
