Light Emotion DERBY3 Bedienerhandbuch

www.lightemotion.com.au

DERBY3

3-in-1 Entertainment Lighting Effect.

User’s instruction manual

This manual contains important information about the safe installation and use of this product

Please read this instruction manual carefully before installing or operating

Please keep these instructions in a safe place for future reference

V1.01

Contents

1. Safety Instructions 2

2. Installation 3

3. Features 3

4. Menu Operation 4

5. IR Remote Control 6

6. DMX Control 7

7. DMX Connections 9

8. DMX Address Setting 9

9. DMX Terminator 10

10. Cleaning and Maintenance 10

11. Technical Data 10

12. Warranty 11

Introduction

Thank you for the purchase of your DERBY3 3-in-1 Lighting Effect by Light Emotion. We are confident you will

be satisfied with your purchase and enjoy many years of use from this Professional Light Emotion product. Please

read these instructions carefully to ensure the product is well look after and used correctly to avoid any potential

problems.

Please note that as part of our ongoing commitment to continuous improvement and product development, the

specifications in this manual are subject to change without notice. Whilst every care has been taken in the

preparation of this manual we reserve the right to change specifications in the course of product improvement.

What is in the box:

- 1 x DERBY3 fixture

- Power cable

- Laser safety switch key

- IR remote control

- This user manual

1. Safety Instructions:

Please read these instructions carefully. It includes important information about the installation usage and

maintenance of this product.

- Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also

receive this instruction booklet.

- Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is

not higher than that stated on the sticker of the fixture.

- This product is intended for indoor use only. To prevent risk of fire or shock, do not expose fixture to rain or

moisture.

- Make sure there are no flammable materials close to the unit while operating.

- The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surface. Be sure that

no ventilation slots are blocked.

- Always disconnect from power source before servicing.

- Secure fixture to stands, trussing and the like using a safety chain.

- Maximum ambient temperature is 40˚C. Do not operate fixture at temperatures higher than this.

- In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself.

Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized

technical assistance centre.

- Make sure power cord is never crimped or damaged.

- Never disconnect power cord by pulling or tugging on the cord.

- Never carry the fixture directly from the cord. Carry by holding the unit directly or via the hanging bracket.

- Avoid direct eye exposure to the light source while it is on.

2. Installation:

Caution: For safe mounting of this product, please read the following carefully.

- Use a suitable clamp to attach to lighting stand, trussing or bar, together with safety chain.

- When mounting the product, do not stand directly underneath the product

- Always use a safety chain when mounting the product on stands, trussing or bars. Make sure the breaking strain

rating of the chain is at least 10 times the weight of the product.

- Make sure there is adequate ventilation around the product.

- Never look directly into the LED light or laser sources of the product.

- For indoor use only – do not use outdoors.

- To avoid electrical shock, keep away from rain and moisture.

3. Features

This product is designed as entertainment effect lighting fixture and is only intended to be used as an effect for

entertainment and production applications. Due to our ongoing commitment to constantly reviewing and improving

products, features and specifications are subject to change without prior notice.

It features a Derby effect, RGB mini laser which produces patterns and a unique 105 SMD LED panel round flood

area that can be used for patterns, strobing and flood light applications. All three built-in effects can be controlled

independently or used together to create interesting lighting effect shows. Like most lighting effects, the beams of

the Derby in particular are enhanced in an environment where a smoke / fog or haze machine is used, but the use of

an effects machine is not necessary for this light to provide a great and effective light show.

- Derby LED: 2 x 10w RGBW 4-in-1 10W LED

- SMD LED Panel: 105 x 0.2W RGB 30-in-1 SMD LED

- Laser: Red 100mW/650nm + Green 30mW/532nm + Blue 80mW 450nm

- Control: Sound activated, auto, DMX, master/slave, IR remote control

- DMX channels: 2 / 14 ch selectable profile

- Power input: 100-240VAC, 50/60Hz.

- Power consumption: 50W

- DMX connections: 3 pin male and female XLR

- Dimensions: 510 x 290 x 295mm

- Weight: 6.5kg

4. Operation

Because this light features a laser, there is the mandatory key operated laser safety switch on the rear of the unit.

This is independent of the power on/off switch. The laser will not operate until the safety switch is placed into the

on position using the included key. All other functions of the product will work regardless, when the power switch

is on.

The four button LED menu control on the rear of the product allows you to access all features of the product

including how it is to be controlled.

LED Four Digit Display:

Menu Up Down Enter

Using the four button LED menu control, press the menu button repeatedly until you reach your desired mode. You

can also scroll though the modes using the up and down buttons. Press enter to access being able to vary the settings

for that mode or feature. Using the up and down buttons, adjust to the desired setting, then press enter again to save

your setting.

The following table shows each of the modes and the settings able to be varied in each mode:

Explanation of Menu items.

Addr – DMX address

ChMd – DMX profile 2 or 14 channel mode

ShNd – Built in show selection

SPEE – Speed setting for shows 1-7 if not sound activated

SLMD – Chose between master or slave mode

SoUn – Sound activation on or off

SoSe – Sets sound sensitivity

NodM – Sets what the light does if there is loss of DMX signal

LED – LED display on or off – When you chose off, the LED display will turn itself off after 10

seconds of not being used. Pressing mode turns on the LED display.

Ver – shows the software version of the light

TEST – Test mode.

Notes:

- DMX takes priority over all other mode settings. If there is a DMX lead connected and a DMX

signal received, the light will immediately be controlled by DMX.

- After using the LED menu, hold down the menu button for 2 seconds for the light to resume

normal operation. Otherwise normal operation will resume after 10 seconds (as in light effects

output).

MENU UP/DOWN Default

Value

Function

1 Addr 1-512 1

DMX Address setting

2 ChMd 14Ch 14Ch

14 channel setting

2Ch

2 channel setting

3 ShNd

Sh 1 Sh 7

Show

1 Derby Only

Sh 2

Show

2 SMD LED Panel Only

Sh 3

Show

3 Laser Only

Sh 4

Show

4 Derby and Laser

Sh 5

Show

5 Derby and SMD LED Panel

Sh 6

Show

6 Laser and SMD LED Panel

Sh 7

Show

7 Combined 3 effects

4 SPEE 0-100 90 Sh 1-Sh 7

speed setting

5 SLMD MASt MASt

Master mode

SLAV Slave mode

6 SoUn ON/OFF ON

Sound activation on or off

7 SoSE 0-100 90

Sound sensitivity setting

8 NodM

Prom Prom

If no DMX, use master mode

BLAC

If no DMX, enter standby mode

HoLd

If no DMX, use last show

9 LED ON/OFF ON

LED Display on/off

10 Ver

V10

Version

11 Test

Test mode

5. Infra Red remote control.

Number

Button Function

1 Stand By Stand by

2 DMX Hold on

3-10 Show 1-Show 8 Show1-Show7 (Show 8 hold on)

11 LED Colour LED colour select

12 LED Random LED colour randomly

13 Sound ON Sound on

14 Laser Colour Laser colour select

15 Laser Random Laser colour randomly

16 Sound OFF Sound off

17 Speed - Show 1 - Show 7 speed down

18 Speed Show 1 - Show 7 speed default

19 Speed+ Show 1 - Show 7 speed up

6. DMX Control

Using DMX you can control each of the three effects built into this light individually. You can also

use DMX to call upon built in programs and shows. This fixture has 2 DMX profiles – 2 and 14

channels modes. The 14 channel mode allows individual control of all the effects while the 2

channel mode is a simpler way to control the light by DMX simply calling upon built in programs

and features.

14 Channel DMX chart:

DMX Value Range

Function

CH1

Access to b

uilt-in

shows via DMX

0-9 No function

10-44 Show 1 Derby only

45-79 Show 2 SMD LED panel only

80-114 Show 3 Laser only

115-149 Show 4 Derby and Laser only

150-184 Show 5 SMD LED panel and Derby only

185-219 Show 6 Laser and SMD LED panel only

220-255 Show 7 All three effects together

CH2

RGBW Derby

colour select

(CH1 set 0-9)

0-9 black-out

10-198 Choose colours（15 groups),

13 DMX values for

each colour.

199-225 Colour chase1 (single colour) from slow to fast

226-255 Colour chase2 (multiple colour) from slow to fast

Sound active

on/off（CH1 set

0-9）

0-247 Sound control off for Show 1 -

Show 7 from slow

to fast

248-255 Sound control on for Show 1 - Show 7

CH3 Derby LED

Strobing

0-9 No strobing

10-244 Derby LED strobe speed from slow to fast

245-255 Derby LED strobe by sound

CH4

LED Motor setting

0-127 Derby LED motor position select

128-255 Derby LED motor scan speed from slow to fast

CH5 SMD LED Setting

0-9 SMD LED off

10-255 Strobe, LED chase effect select

CH6 Strobe chase

speed

0-127 No strobe, LED chase speed from slow to fast

127-255 With strobe, LED chase speed from slow to fast

CH7 Laser colour

select

0-9 Laser off

10-127 Laser colour fixed

128-255 Colour chase speed from slow to fast

CH8 Laser pattern

select 0-255 Laser pattern select

CH9 Laser pattern size

0-63 Choose patterns size

64-127 From small to large, speed up rate

128-191 From large to small, speed up rate

192-255 Large – small – large, speed up rate

CH10

Laser pattern

rotation

0-127 Rotation angle select

128-191 positive rotation speed

192-255 Inverted rotation speed

CH11

Laser pattern pan

position

0-127 Horizontal position

128-255 Horizontal move, speed up rate

CH12

Laser pattern tilt

position

0-127 Choose vertical position

128-255

Vert

ical move, speed up rate

CH13

Laser scan track

choose 0-255 Track choose

CH14

Laser track scan

speed choose 0-255 Laser track scan speed from slow to fast

Note: In 14 channel mode, channel 1 needs to be set between 0 and 9 to be able to control the

feature of the light individually. When channel 1 is set between 10 and 255, the light will perform

one of the 7 inbuilt shows in accordance to what the DMX setting is on channel 1. Also note that

channel 2, when channel 1 is set between 10 and 255 playing shows, controls sound activation and

the speed of the shows

2 channel DMX Chart:

DMX Value Range Function

CH1 Show mode

0-9 No function

10-44 Show 1 Derby LED only

45-79 Show 2 SMD LED Panel only

80-114 Show 3 Laser only

115-149 Show 4 Derby and Laser only

150-184 Show 5

Derby and SMD LED panel

185-219 Show 6 Laser and SMD LED panel

220-255 Show 7 Three effect combined

CH2

Show

speed/Sound

active

0-247 Show 1-Show 7 speed from slow to

fast

248-255 Show 1-Show 7 Sound active

7. DMX-512 Control Connection

Using a 3 pin XLR cable, you can connect the product to a DMX controller and then to other fixtures

with 3 pin XLR inputs and outputs. When not using DMX, multiple fixtures can be connected together

and operate under master/slave control. The signal cable should have two core with shielded cable, the

signal connectors are XLR input and output connectors. Please refer to the below diagram:

8. DMX Address Setting

When being used in conjunction with a DMX controller, each fixture must be set a specific starting

address. When receiving signal, fixture will receive channel control signals of this address from the

DMX controller.

For simplicity, the user can use the same address for multiple fixtures but this will result in each fixture

providing exactly the same output and fixtures with the same DMX address cannot be individually

controlled.

To control each fixture individually via DMX, each fixture must have its own unique DMX address. If

this fixture is in 14 channel DMX mode then each address must be 14 channels apart. For example, if

the first unit is on DMX channel 1, the 2

must be on DMX channel 15, the 3

on channel 29 and so on.

Similarly, for 2 channel DMX mode, the DMX channels would be 1,3,5,7 and so on.

Some DMX controllers may group fixtures in lots of 16 channels – so in that case, fixture 1 on channel 1,

fixture 2 on channel 17, 3 on 33, and so on. Refer to your DMX controllers’ instruction manual on how

best to manage your DMX channel allocation.

DMX Out

addr 001

addr 015 3

addr 029

Inhaltsverzeichnis

Andere Light Emotion Beleuchtungsausrüstung Handbücher

Light Emotion

Light Emotion DERBY2 Leitfaden

Light Emotion

Light Emotion FLAT1012 Bedienerhandbuch

Light Emotion

Light Emotion LX90SPOT Bedienungsanleitung

Light Emotion

Light Emotion DMXDIM4LED Bedienerhandbuch

Light Emotion

Light Emotion thunderboltg2 Bedienerhandbuch

Light Emotion

Light Emotion Phantomrgb1700 Bedienungsanleitung

Light Emotion

Light Emotion QUARK2GBC Bedienungsanleitung

Light Emotion

Light Emotion STROBA Bedienerhandbuch

Light Emotion

Light Emotion MILKYWAY3 Bedienerhandbuch

Light Emotion

Light Emotion PARBAR4 QUAD Bedienungsanleitung

Light Emotion

Light Emotion LEDBAR1803 Bedienerhandbuch

Light Emotion

Light Emotion PARBAR Bedienerhandbuch

Light Emotion

Light Emotion UVLED Bedienungsanleitung

Light Emotion

Light Emotion QUARK2RBP Bedienungsanleitung

Light Emotion

Light Emotion VIVID0312 Bedienerhandbuch

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung