Please read and follow all instructions carefully and keep them in a safe
place for future reference. Do not allow anyone who has not read these
instructions to assemble, adjust or operate the heater.
This heater is an electric heater with a ventilator/fan
motor. It can be used in the home, warehouse, workshop
or greenhouse. It has a mounted thermostat and a back-
up safety cut-o thermostat. The mounted thermostat
takes the temperature of the air going into the heater
and controls the temperature of the room. The cut-o
thermostat will switch o the heater if overheating, to
ensure safety. The fan motor is not controlled by the
thermostats and when the heating element is cut o, the
ventilator stays on.
When operating the heater for the first time, you may
notice a slight emission of smoke. This is quite normal
and it stops after a short time. The heating element is
made of stainless steel and is coated with protection
oil at production. The smoke is caused by the left oil
when heating.
Technical specifications
Voltage/frequency: AC 220-240 V ~ 50Hz
Power rating: 2025 W
Settings: 3 (fan only, 1000 W and 2000 W)
Temperature: Continuously adjustable 0-85 °C
Dimensions: 230 x 198 x 320mm
Weight: 3.5kg
Requires at least a 10 A fuse
Housing of steel plate and heat-resistant lacquer
Supplied complete with cord and plug
IPX4
Special safety regulations
Warning: In order to avoid overheating, DO NOT COVER the heater during use.
When using an electrical appliance, basic precautions should always be followed including below:
• The fan heater is not suitable for use outdoors in damp weather, in bathrooms, shower stalls or in other
wet or damp environments.
• The fan heater can become very hot and should, therefore, be placed at a safe distance from flammable objects
such as furniture, curtains, tent fabrics and similar.
• Do not cover the fan heater.
• Do not place the fan heater immediately under a wall socket.
• Do not connect the fan heater using an on/o timer or other equipment which can automatically switch the device on.
• The fan heater must not be placed in rooms where flammable liquids or gases are used or stored.
• If an extension cord is used, it must be as short as possible and always be fully extended.
• You must not connect other appliances to the same mains socket as the fan heater.
• If the cord of the heater is damaged, it must be repaired by manufacturer or qualified electrician.
• Make sure heater is always under surveillance, do not leave it for a considerable amount of time when in use.
• Keep children and animals away from the heater.
• Do not place the appliance on moving vehicles or somewhere it can to be tipped over.
• Unplug the appliance when not in use for a long period of time.
• Never remove the plug by pulling on the cord.
• Keep the heater away from curtains, fabric or other places where the air inlet can easily be blocked.
• The power coupler is waterproof when not in use. In order to prevent possible electric shock or leakage current, never
use the appliance with wet hand or operate the appliance when there is water on the power cord.
• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your
local government for information regarding the collection systems available.
• The heater should not be used by children or those of restricted ability, without proper supervision and instruction.
Description of Control Panel
Function selector with
three power settings
Thermostat dial
