Lightmaxx Vector Haze 1.7 Bedienungsanleitung

ENGLISH

Important safety instructions! Please read before connection!

DANGER! (Electrical shock due to high voltages in the device)

The housing must not be removed! There are no parts to be maintained in the device.

Inside the unit there are components which are under high electrical voltage.

Before each use, check the device for damage or the absence of components, protective

devices or housing parts. If this is the case, the device must not be used!

Leave maintenance and repair work to a qualified service workshop or contact your

dealer. In the case of a malfunction of the device, operation must also be stopped

immediately until the device has been repaired by a specialist!

DANGER! (Electric shock due to short circuit)

Modifications to the power cord or plug are prohibited. If the power cord is damaged, it

must be replaced immediately with an original spare part from the manufacturer. Failure

to do so may result in fire or death due to electric shock!

DANGER! (For babies and children)

Dispose of or store any packaging material properly! Packaging material must be kept out

of the reach of babies and children due to the risk of suffocation.

Ensure that children never use the appliance unattended! In addition, make sure that

children do not remove (small) parts from the device, as they could suffocate by

swallowing parts!

Hint! (Fire and injure hazard due to overheating)

The maximum permissible ambient temperature of this device is 40°C.

Ensure that the unit is placed in a well-ventilated location away from direct heat sources,

naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.

Do not tape or cover the ventilation slots of the unit.

The units' surface temperature may reach up to 85C. Don't touch the housing with bare

hands during its operation.

Allow the device about 10 minutes to cool down before you start servicing.

Hint! (Operating conditions)

Due to its structural characteristics, the device is designed for indoor operation (IP20).

Never expose the device to rain, moisture or liquids as this may cause damage.

Vibrations, dust or sunlight can also cause damage, avoid them!

ENGLISH

Hint! (Power supply)

It is essential that you check that the device voltage matches your local mains voltage. It

is highly recommended that you fuse your mains socket with a residual current circuit

breaker (FI).

If you do not use your device for a longer period of time or carry out maintenance work,

disconnect the device from the mains in order to minimize danger. The same applies to

storm conditions such as thunderstorms, floods, etc.

Hint! (Error during data transmission)

Never connect the DMX input or output to audio devices such as power amplifiers or

mixing consoles!

DMX cables enable trouble-free operation and the highest possible transmission reliability

of signal data. Do not use microphone cables!

Hint! (Condensation)

To avoid condensation in the unit, the unit should adapt to the ambient temperature

before commissioning.

Hint! (Unwanted odours)

A new product can sometimes lead to unwanted odours. This reaction is normal and

disappears after a few minutes.

Symbols on device and packaging:

The lightning flash symbol warns the user of uninsulated voltages and the risk

of electric shock.

The exclamation mark symbol draws the user’s attention to important maintains

and operating instructions in the manual.

Only suitable for indoor use.

Read the manual.

ENGLISH

Installation:

Be sure to check the unit for damage before use. Use the original packaging or a suitable

transport or storage packaging to protect the product from dust, moisture, etc. when not in use.

Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the

same type and electrical specifications!

Make sure to always place the unit on a stable surface, never install the fogger above the

audience, a little liquid can always drip from the fog output.

WARNING! (Risk of injury due to falling down)

Improper installation can cause considerable injury and damage!

The installation of the device should always be carried out by experienced personnel and

must be carried out in compliance with the mechanical and electrical safety regulations in

your country.

Hint! (Fog fluid)

Disconnect the device from the mains before filling!

Do not fill with hot liquids!

Only use high-quality water-based fog fluids recommended by your dealer. Other fog

fluids can lead to clogging or dripping of the device.

Suitable fog fluid:

lightmaXX Premium HAZE FLUID 5L, Hazer Fluid –LIG0010218-000

The fog fluids recommended by the manufacturer are environmentally harmless and can

be disposed of via the sewer.

Make sure that there is always a sufficient amount of fog fluid in the tank.

A too low tank level can lead to pump damage and overheating of the heating element

during operation!

ENGLISH

Congratulations on your new LightmaXX Vector Haze 1.7!

Thank you for choosing a LightmaXX product. Through efficient development and economical

production, LightmaXX enables high quality products at a fantastic price.

Please read the instruction manual carefully to learn about all the features of this

product and keep it for future use.

Have fun with your new product!

Your LightmaXX Team

Guarantee:

The current general terms and guarantee conditions

of the Music Store professional GmbH apply.

You can view it at: www.musicstore.de

If you have any questions or suggestions, please

Music Store professional GmbH

Istanbulstr. 22-26

51103 Cologne

Managing Director: Michael Sauer

WEEE-Reg.-No. DE 41617453

Tel: +49 221 8884-0

Fax: +49 221 8884-2500

info@musicstore.de

Intended use:

The product LightmaXX Vector Haze 1.7 is used exclusively for the generation of artificial fog

by vaporizing the filled fog fluid. The device may only be used for this purpose and in accordance

with the operating instructions. Other purposes as well as operation under other operating

conditions are expressly not intended and can lead to damage to property or personal injury! No

liability is assumed for damage resulting from improper use.

It must be ensured that the device is operated exclusively by trained and competent users who are

in full possession of their mental, physical and sensory abilities. The use of other persons is

expressly only permitted at the request of a person responsible for their safety, who instructs or

supervises the use.

Content

Quantity

lightmaXX Vector Haze 1.7

Power cable

Manual

Scope of delivery:

ENGLISH

Set up:

Connect the product to the power supply and then turn it on. Wait until the heating element has

reached the operating temperature. The control is now carried out either by DMX, remote control

or by operation on the device itself.

Display and menu buttons:

The device has 4 operating keys and an LCD display on which

all settings can be addressed and read.

Button

Function

Description

Interval Set

(5-200sec)

Duration Set

(5-200sec)

Timer-mode-setting

Timer Out

(1-100%)

Volume Out

(1-100%)

Fan Speed

(1-100%)

DMX Add

(001-512)

Fluid sensor on/off

Timer/

Up/Activate Timer function

Volume/

Down

Down/Activate Volume

function

Stop

Stop/Exit

ENGLISH

Set interval

To set the interval, press "Menu" until "Interval set" appears on the display.

Then use the Up/Down buttons to set the fog pause from 5 to 200 seconds.

This setting is required if you want to use the timer mode.

Setting the fog duration

To set the duration, press "Menu" until the display shows "Duration set".

Use the Up/Down buttons to set the fog duration from 1 to 200 seconds.

This setting is required if you want to use the timer mode.

Setting the Fog Level for Timer Mode

To set the fog quantity for the timer mode, press "Menu" until the display shows "Timer out".

Use the Up/Down buttons to set the fog quantity from 1 to 100%.

This setting is required if you want to use the timer mode.

Setting the Fog Level for Volume Mode

To adjust the fog quantity, press "Menu" until the display shows "Volume out".

Use the Up/Down buttons to adjust the fog volume from 1 to 100%.

This setting is required if you want to use the option Volume (Continuous Mode).

Setting the fan speed

To set the fan speed, press "Menu" until the display shows "Fan Speed".

Use the Up/Down buttons to set the fan speed between 1 and 100%.

Setting the DMX address

To set the DMX address, press "Menu" until the display shows "DMX ADD xxx".

Then use the Up/Down buttons to set the value from 001 to 512.

Activating/deactivating the liquid sensor

Press "Menu" until "Fluid sensor" appears in the display.

Use the Up/Down buttons to activate or deactivate the fluid sensor (On/off).

When the Fluid sensor is activated, the display shows "Ready to Fazer S".

If the Fluid sensor is deactivated, the display shows "Ready to Faze".

ENGLISH

Timer Mode

In the timer mode, the fog machine will automatically emit fog. The time intervals, duration and

fog volume depend on the corresponding menu settings. Press the TIMER button, to activate the

timer mode. The display indicates the set time interval:

Interval xxx s

The unit counts down to 0 seconds and emits fog. To deactivate the timer mode, press the Stop

button.

Volume (Continuous Mode)

Press the VOLUME button, to activate continuous fog output. The display indicates Volume

followed by the value that was set in menu item “Volume Out”:

Duration xxx s

To stop the fog output, press the Stop button.

ENGLISH

DMX mode:

Configuration of the DMX connector:

Resistance 120 ohm // ¼ w between pin 2 (DMX-) and pin 3 (DMX+) oft he last fixture.

Connect the DMX input of your device to the DMX output of your DMX controller, your DMX

software or the DMX output of a device already in your DMX chain. Always use a DMX cable with

a 110 Ohm resistor for this connection. Address the device according to your DMX configuration.

The following table shows the respective DMX modes of the individual devices with the

corresponding values and functions:

Channel

Value

Function

000-005

Off

006-255

1-100% Fan Speed

000-005

Off

006-255

1-100% Fog Output

ENGLISH

Connections and controls:

ENGLISH

No.

Designation

No.

Designation

Output nozzle

Fuse

Fan

Power input (Power Twist)

Air baffle (adjustable)

DMX-Out (3-pol)

Castors

DMX-In (3-pol)

Butterfly lock for removable cover

Display

Carrying handle

Menu buttons

Fluid tank compartment

Andere Handbücher für Vector Haze 1.7

Inhaltsverzeichnis

Andere Lightmaxx DJ-Equipment Handbücher

Lightmaxx

Lightmaxx COMPLETE PAR 56 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega BAR RGBW Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega BAT-1 Bedienungsanleitung

Lightmaxx

Lightmaxx Vector Haze 1.0 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Hyper Spot Bedienungsanleitung

Lightmaxx

Lightmaxx LIG0009432-000 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Haze 900 Bedienungsanleitung

Lightmaxx

Lightmaxx LED Mega PAR 64 144 Watt RGBW Bedienungsanleitung

Lightmaxx

Lightmaxx COMPLETE PAR 56 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega spot 60 Bedienungsanleitung

Lightmaxx

Lightmaxx VECTOR Spot 200 Bedienungsanleitung

Lightmaxx

Lightmaxx Platinum UV BAR LED Bedienungsanleitung

Lightmaxx

Lightmaxx Vega BAT LED Bedienungsanleitung

Lightmaxx

Lightmaxx Slim Spot ARC Bedienungsanleitung

Lightmaxx

Lightmaxx VEGA SPOT 90 Bedienungsanleitung

Lightmaxx

Lightmaxx CLS FX Laser Bar System Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Pixel BAR Bedienungsanleitung

Lightmaxx

Lightmaxx Vega PAR RGB Bedienungsanleitung

Lightmaxx

Lightmaxx TRICORNO LED LIG0009559-000 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega PAR FX II Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Beam 1.0 Bedienungsanleitung

Lightmaxx

Lightmaxx Cannon Shot FX FOUR Bedienungsanleitung

Lightmaxx

Lightmaxx VEGA ARC Pro II MKII Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung