Lightmybricks 75954 Bedienungsanleitung

The following page is the instructions for the Light My Bricks LEGO Hogwarts

Great Hall (75954) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO Hogwarts Great Hall (75954) LED

Light My Bricks: LEGO Hogwarts Great Hall

75954 Lighting Kit

light kit , please click here to view the product page

Package Contents:

8x White 30cm Bit Lights

4x White 15cm Micro Bit Lights

3x Green Strip Lights

1x White Strip Light

1x Flicker Effects Boards

1x Micro 4-Port Expansion Board

2x 6-Port Expansion Boards

2x 5cm Connecting Cables

3x 15cm Connecting Cables

2x 30cm Connecting Cables

1x AA Battery Pack (Requires 3x AA Batteries)

6x Adhesive Squares

LEGO Pieces:

6x Black Plate 1×6

4x Black Tile 1×1 with Clip

4x Black 1×1 Modiﬁed Plate Rounded with Handle

1x Black Round Plate 1×1 with open stud

1x Black Plate 1×2 modiﬁed with stud jumper

3x Trans Clear Plate w Rounded Bottom 2×2

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will begin with installing spot lights to the exterior of the Great Hall. First,

take out the following provided LEGO pieces to make up an angled spot light.

2x Black Plate 1×6

1x Black Tile 1×1 with Clip

1x Black 1×1 Modiﬁed Plate Rounded with Handle

Take a Green Strip Light and using it’s adhesive backing, stick it onto the base

of the black 1×6 plate for the spot light

2.) Repeat the previous step to build another 3 spot lights using provided

pieces and Green Strip Lights as per below:

4x Black Plate 1×6

2x Black Tile 1×1 with Clip

2x Black 1×1 Modiﬁed Plate Rounded with Handle

2x Green Strip Lights

3.) Take a 15cm Connecting Cable and connect it between two of the spot

lights, then take a 30cm Connecting Cable and connect one end to the right

strip light as shown below:

Connect the two spot lights to the front of the great hall in the below positions,

then tuck the 15cm connecting cable underneath the base of the hall.

4.) Take the other end of the 30cm Connecting Cable and connect it to the

third spot light (green strip light’s left port), then bring it around to the right

side of the hall. Disconnect and discard the following grey angled tile and

connect the spot light to this position.

Hide the 30cm cable in between the spot lights underneath the base of the hall

as shown below.

5.) Take the AA Battery Pack and insert 3x AA Batteries to it. Connect the

battery pack cable to the left port on the spot light on the left of the Hall. Turn

ON the battery pack to test the spot lights are working OK.

6.) Take a new 15cm Connecting Cable and connect it to the third green Strip

Light. Connect the other end of the cable to a 6-Port Expansion Board.

Inhaltsverzeichnis

Andere Lightmybricks Beleuchtungsausrüstung Handbücher

Lightmybricks

Lightmybricks LEGO HOGWARTS CASTLE AND GROUNDS LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO TRANQUIL GARDEN 10315 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Winter Village Post Office 10222 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks 75969 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO ORCHID Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO HOCUS POCUS THE SANDERSON SISTERS' COTTAGE 21341 LIGHT... Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO VENETIAN HOUSES 910023 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO CONCORDE Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO PALACE CINEMA 10232 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO MARVEL SPIDER-MAN CARNAGE Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO 75274 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO AVENGERS TOWER Bedienungsanleitung

Lightmybricks

Lightmybricks Blade Runner Spinner Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO OBI-WAN KENOBI VS. DARTH VADER Bedienungsanleitung

Lightmybricks

Lightmybricks 75322 Bedienungsanleitung

Lightmybricks

Lightmybricks 10266 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO ALPINE LODGE Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO STORMTROOPER HELMET LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks 76989 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO AIRBUS H175 RESCUE HELICOPTER 42145 LIGHT... Bedienungsanleitung

Lightmybricks

Lightmybricks FKP 37 Bedienungsanleitung

Lightmybricks

Lightmybricks 10292 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO OPTIMUS PRIME Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung