Lightronics FXLD818FRP4I Bedienungsanleitung

Page 1 of 6

FXLD818FRP4I LED FIXTURE

Version0.1 OWNERSMANUAL 06/06/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

FEATURES AND SPECIFICATIONS

LEDS: 18, 8 Watts each (R,G,B,W - 4 in 1)

Beam angle: 25 º

Control system: DMX-512 + Stand Alone Modes

DMX channels: 4/5/7

DMX connectors: 3 pin XLR

Voltage: 100 - 240 VAC 50/60Hz

Max power consumption: 164 Watts

Body material: Die Cast Aluminum

Body color: Black

Size: 13.25"L x 11.8"W x 4.6"H

Weight: 15.5 lbs (7kg)

DESCRIPTION

The FXLD818FRP4I is a RGBW LED lighting fixture.

It is suitable for stage, disco, night club, and other

artistic applications. It has several stand alone control

modes and can operate via a DMX-512 external signal.

A double yoke enables the fixture to be operated in

several positions.

INSTALLATION

LOCATION

The FXLD818FRP4I is rated IP20 and is intended for

INDOOR USE ONLY.

Locate the unit in a well ventilated area away from

moisture and heat. Keep the vent holes clear. Holes

are provided on the yokes to install a lighting bar pipe

clamp. Use a safety cable when hanging the fixture.

POWER CONNECTIONS

The FXLD818FRP4I has a blue powercon style

connector for power input. A compatible power cable

is provided for connection to a 120 VAC, 15 Amp,

60Hz, grounded service. Push the blue connector on

the cable straight into the blue connector on the unit

and twist aprox. 1/8 turn clockwise to latch it.

The white powercon style connector on the unit is used

to pass power on to another unit. A mating white

connector is also provided.

Caution is advised since the line cord is rated for

aprox. 7 Amps maximum.

THE SAFETY GROUND TERMINAL ON ALL POWER

CABLES MUST BE USED.

DMX CONNECTIONS

A system using DMX control should be connected as a

chain of devices. In other words the control signal

cable should proceed from the controller to the first

receiving device and then to others in a continuous

"daisy chain" fashion.

The fixture has a DMX IN and a DMX OUT connector

to be used to connect the chain. The control cable

should NOT be split into a multiple run star

arrangement with a cable running from the controller

directly to each receiving device pack.

DMX CONNECTOR PIN ASSIGNMENTS

There are two different connectors which can be used

for DMX control. They are both XLR type connectors.

Some units use 3 pin connectors. Others use 5 pin

connectors. The FXLD818FRP4I receives a DMX

signal on the 3 pin MALE connector on one side of the

unit. The 3 pin FEMALE connector is used to connect

the next DMX device on the control chain.

CAUTION

RISK OF ELECTRIC SHOCK

Page 2 of 6

FXLD818FRP4I LED FIXTURE

Version0.1 OWNERSMANUAL 06/06/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

If your console uses a 5 pin connector you can make up

an adapter cable to accommodate this. The table below

shows the pin assignments for BOTH the 3 pin and 5

pin connectors.

DMX TERMINATION

A DMX chain should be terminated at the last

receiving device on the chain. This is done by

installing a commonly available 1/4 Watt, 120 Ohm

resistor across the DATA - and DATA + wires at the

last device. If you have only a few fixtures very close

together and a very short run to the controller then you

may be able to operate without the terminator.

OPERATION

A control panel on one side of the unit is used to set the

operating options. It consists of an LED display and

four buttons

(MENU, UP, DOWN, and ENTER)

Push

to access the operating options. Then use

and

DOWN

to scroll through the available choices.

When you reach the option you want to set or change -

push

ENTER

.Now you can view the current setting

for the option and/or change it. Push

ENTER

to save

your changes and activate the option. See the "MENU

NAVIGATION" diagram for additional details.

There are 9 operation modes: DMX, Red Level, Green

Level, Blue Level, White Level, Strobe, Fade, Auto

Sequence, and Auto Run.

DMX OPERATION

Use the Addr menu to set the starting address of the

unit. You can set the starting address of the unit with

the UP and DOWN buttons.

For DMX operation the FXLD818FRP4I fixture can be

configured as a 4 channel, 5 channel, or 7 channel unit.

Set the CH - - menu to A001(4 channel), P001

(5 channel), or F001(7 channel) operation.

Detailed information on DMX channel operation is

given in the tables

DMX VALUES AND FUNCTIONS

MANUAL OPERATION

For manual operation the red, green blue, and white

LED intensity levels may be independently set. Use

the rL - -, gL - -, bL - -, and EL - -, menus to set

the levels. The range is from 00 to 100. 00 is OFF.

STROBE MODE (

FLAS

)

The Strobe mode causes the unit to flash all led's. The

speed is user controllable by using the FLAS menu.

The speed range is 1 - 100. 100 is fastest.

AUTO FADE

(FAdE)

The Auto Fade mode cycles smoothly through a

sequence of seven colors. Use the FADE menu to set

the speed and activate the option. The range is from 0

to 100. 100 is fastest.

AUTO SEQUENCE (

ASC -

)

The AUTO SEQUENCE mode switches continuously

through a sequence of colors. Use the ASC - menu to

set the sequence speed. The range is from 1 to 100.

100 is fastest.

AUTO RUN (

Auto

)

The unit can operate using 100 preset programs.

Programs 0 thru 49 are a variety of colors and patterns.

Programs 50 thru 100 are similar but are sound synced

to music base notes.

Use the Auto menu to select and activate a preset

autorun program.

PIN # SIGNAL NAME

1 DMX COMMON

2 DMX DATA -

3 DMX DATA +

4 NOT USED

5 NOT USED

MENU UP DOWN ENTER

CONTROL PANEL

Page 3 of 6

FXLD818FRP4I LED FIXTURE

Version0.1 OWNERSMANUAL 06/06/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

MAINTENANCE AND REPAIR

TROUBLESHOOTING

Check that you have power applied to the unit.

Check the DMX control cable.

Check the address settings of the unit and the

controller.

CLEANING

Do not use harsh chemicals or solvents when cleaning

the fixture. A mild detergent can be used sparingly if

needed. Ensure that the unit is completely dry before

re-use.

REPAIR

The fixture contains a 2 Amp, fast acting, 5mm x

20mm externally accessible fuse. Replace the fuse

ONLY with the same size and type.

The FXLD818FRP4I does not contain any other user

serviceable parts. Internal service on the unit by other

than Lightronics authorized agents will void the

warranty.

If service is required, contact the dealer from whom

you purchased the item, or contact the Lightronics,

Service Department, 509 Central Drive, Virginia

Beach, VA 23454. Tel: 757 486 3588.

PHOTOMETRIC CHARACTERISTICS

Distance Illuminance Beam Diam.

(ft) (Lux) (ft)

10 1478 4

20 426 6

30 198 8

CAUTION DO NOT OPEN UNIT

RISK OF ELECTRIC SHOCK

RISK OF FIRE

Page 4 of 6

FXLD818FRP4I LED FIXTURE

Version0.1 OWNERSMANUAL 06/06/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

MENU NAVIGATION

Page 5 of 6

FXLD818FRP4I LED FIXTURE

Version0.1 OWNERSMANUAL 06/06/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

4 CHANNEL MODE (MODE A)

5 CHANNEL MODE (MODE P)

7 CHANNEL MODE (MODE F)

CHANNEL NO. FUNCTION

1 0 - 255 Red Level

2 0 - 255 Green Level

3 0 - 255 Blue Level

4 0 - 255 White Level

CHANNEL NO. FUNCTION

1 0 - 152 RGB Dimmer Master

153 - 196 Strobe (slow - fast)

197 - 242 Auto Strobe (slow - fast)

243 - 255 RGB Dimmer Master

2 0 - 255 Red Level

3 0 - 255 Green Level

4 0 - 255 Blue Level

5 0 - 255 White Level

CHANNEL NO. FUNCTION

1 0 - 255 Red Level

2 0 - 255 Green Level

3 0 - 255 Blue Level

4 0 - 255 White Level

5 0 - 1 No Strobe

2 - 196 Strobe (slow - fast)

197 - 255 Auto Strobe (slow - fast)

6 0 - 1 No Function

2 - 19 Color Fade (slow - fast)

20 - 39 Color Sequence (slow - fast)

40 - 59 Color Pattern (slow - fast)

60 - 79 Yellow

80 - 99 Purple

100 - 119 Light Green

120 - 139 Orange

140 - 159 Red On/Off (10 sec.)

160 - 179 Green On/Off (10 sec.)

180 - 199 Blue On/Off (10 sec.)

200 - 219 Yellow On/Off (10 sec.)

220 - 229 Cyan On/Off (10 sec.)

230 - 249 White On/Off (10 sec.)

250 - 255 All On

7 0 - 255 Dimmer (All Off - All On)

DMX VALUES AND FUNCTIONS

This product is warranted for a period of TWO YEARS from the date of purchase against

defects in materials and workmanship.

This warranty is subject to the following restrictions and conditions:

A) If service is required, you may be asked to provide proof of purchase from an

authorized Lightronics dealer.

B) This warranty is valid only for the original purchaser of the unit.

C) This warranty does not apply to damage resulting from abuse, misuse, accidents,

shipping, and repairs or modifications by anyone other than an authorized

Lightronics service representative.

D) This warranty is void if the serial number is removed, altered or defaced.

E) This warranty does not cover loss or damage, direct or indirect arising from the use or

inability to use this product.

F) Lightronics reserves the right to make any changes, modifications, or updates as

deemed appropriate by Lightronics to products returned for service. Such changes

may be made without prior notification to the user and without incurring any

responsibility or liability for modifications or changes to equipment previously

supplied. Lightronics is not responsible for supplying new equipment in accordance

with any earlier specifications.

G)This warranty is the only warranty either expressed, implied, or statutory, upon which

the equipment is purchased. No representatives, dealers or any of their agents are

authorized to make any warranties, guarantees, or representations other than

expressly stated herein.

H) This warranty does not cover the cost of shipping products to or from Lightronics for

service.

I) Lightronics Inc. reserves the right to make changes as deemed necessary to this

warranty without prior notification.

Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 20100211

WARRANT

Inhaltsverzeichnis

Andere Lightronics Leuchte Handbücher

Lightronics

Lightronics FXLD312R3I Bedienungsanleitung

Lightronics

Lightronics FXLD354WAI Bedienungsanleitung

Lightronics

Lightronics FXLD154WAI Bedienungsanleitung

Lightronics

Lightronics FXLD68FP2I Bedienungsanleitung

Lightronics

Lightronics FXLD618C2I Bedienungsanleitung

Lightronics

Lightronics FXLD354WAO Bedienungsanleitung

Lightronics

Lightronics FXLD312R3I Bedienungsanleitung

Lightronics

Lightronics PROFILE SPOT575 Bedienungsanleitung

Lightronics

Lightronics FXLD120EW Bedienungsanleitung

Lightronics

Lightronics FXLD818FRP4I Bedienungsanleitung

Lightronics

Lightronics FXLD1036C4O Bedienungsanleitung

Lightronics

Lightronics FXLD127FR5I Bedienungsanleitung

Lightronics

Lightronics FXLE1232W Bedienungsanleitung

Lightronics

Lightronics FXLD100ECMY26B Bedienungsanleitung

Lightronics

Lightronics PAR4 Bedienungsanleitung

Lightronics

Lightronics FXLD348R3I Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung