Lilliput FA1011 Bedienungsanleitung
COLOR TFT LCD
MONITOR
Manual
DEAR CUSTOMERS
Thank you for purchasing the liquid crystal display monitor. This product employs
new integrate circuits and high quality TFT LCD modules. It is putting out with its
low power consumption, emits no radiation, and other advantage characteristics. This
product is shaped with modern style and is easy to be carried with. The color TFT
LCD is the most suitable display for VGA,VCD, DVD and GPS system for motorcars
and ships .It also can be used in the office ,in flat ,at home also in other suitable
position. You will certainly benefit from this monitor in lots of ways, for example,
convenience, safety, space-saving.
We hope that you will have the enjoyment of your new mini color TFT LCD.
To ensure the best use of the unit, please read this handbook carefully beforehand.
CAUTION
1. Please use the adapter attached in the accessory.
2. Do not expose this product to direct sunlight, heat or humid conditions.
3. Keep away from strong light while using this product so as to obtain the
clearest and the most colorful picture.
4. Please avoid heavy impact or drop onto the ground.
5. Do not use chemical solutions to clean this unit. Please simply wipe with a
clean soft cloth to keep the brightness of the surface.
6. If the product does not operate normally when the instructions are followed.
Adjust only those controls that are covered by the instructions. Improper
adjustment of other controls may result in damage and will often require
extensive work of a qualified technician.
Please unplug the power if non-use for a long-term, or a thunder and happens.
YP-0111110
1
CONTENTS
1. PRODUCT DESCRIPTION ---------------------
2. REMOTE CONTROLLER-----------------------
3. MATCHED CABLES-------------------------
4. MENU OPERATION ----------------------------
IN AV MODE--------------------------------------
IN PC MODE--------------------------------------
IN DVI&HDMI MODE--------------------------
5. RAIL SLOT------------------------------------
6. ACCESSORIES ----------------------------------
7. PARAMETER ------------------------------------
8. TROUBLESHOOTING -------------------------
9. REMARK--------------------------------------
1
1. PRODUCT DESCRIPTION
2
1．AV/PC：PC、DVI、VIDEO1、VIDEO2、HDMI switch
2．+：Volume up or to adjust the value of menu setting function
3．-：Volume down or to adjust the value of menu setting function
4．▲：To select function on OSD or to adjust the brightness directly under 6
classes
5．▼：to select item on the OSD or push the key in PC mode directly to
adjust phase automatically
6．MENU: To activate OSD menu
（PS: Long press "MENU" button to zoom in or out picture
automatically when receiving HDMI signal.)
7. Indicate light
8．Infrared receiving window
9．POWER：Power on/off
10．USB interface（connection HUB: Optional）
11．Mini USB interface（Optional）
3
12．Power input
13．DVI、HDMI input interface
14．14P SKS input interface
15. Mounting Process: Standard VESA Sockets (75mm)
2. REMOTE CONTROLLER
1. MUTE
2. Display switch: PC、DVI、VIDEO1、VIDEO2、HDMI switch
3. : Left move，Volume down or to adjust the value of setting
function
4. : Down move, to select function on OSD
5. POWER ON/OFF
6. ：UP move, To select function on OSD
7. MENU
8. : Right move, Volume up or to adjust the value of setting
function
4
3. MATCHED CABLES
Match cable
SKS cable:
1. 14P SKS Input Jack: all kinds of AV signal input, note that put it correctly into the
SKS input jack of the monitor
2. Black 9-pin VGA signal input jack
3. Yellow RCA: Video signal 1 input
4. Yellow RCA: Video signal 2 input
5. White RCA:Audio signal input
6. Black Jack: DC 12V Power input
VGA cable
1. Black 9-pin VGA connector, contact to the 9-pin VGA signal input jack of SKS
cable.
2. USB end connect the USB port of computer for touch screen function.
3. 15-pin VGA signal input end connect VGA port of the computer.
HDMI to DVI cable:
1. HDMI signal input end
2. DVI signal input connect with device with DVI signal
3. USB connect with the USB port of computer for touch function（Optional）
5
HDMI to HDMI cable:
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function（Optional）
4. MENU OPERATION
After connected correctly and then Power on, Press “MENU” on the unit or by remote
control to show MENU.
IN AV MODE
Press “▲ / ▼”on the unit or “ /” on the remote control to select item, eg.
,and it will be highlighted; and then press “+ / -”on the unit or / on the
remote control to adjust the favorite values. It shows current picture format
(NTSC&PAL) below the dialog box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST: to adjust the level of contrast
SATURATION: to adjust the level of saturation
TINT: to adjust the hue of image
SHARPNESS: to adjust the level of sharpness
6
LANGUAGE：There are 2 languages provided for choice, English and Chinese
RESET: you can reset adjustment of the unit when click “YES”
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
OSD DURATION: to adjust the duration of OSD from5-100seconds
Mode shift between 4:3 and 16:9
EXIT OSD: select “YES”to exit
IN PC MODE:
Press “▲ / ▼”on the unit or “ /” on the remote control to select item, eg.
, and it will be highlighted; and then press “+ / -”on the unit or / on the
remote control to adjust the favorite values. It shows current picture mode
specifications below the dialog box.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST: to adjust the level of contrast
PHASE: to adjust the beginning point and terminal point of image
FREQUENCY: to adjust the frequency range of image
7
OSD H-POSITION: to adjust the picture position in horizontal direction
OSD V-POSITION:to adjust the picture position in vertical direction
RESET: you can reset adjustment of the unit when click “YES”
COLOR TEMPERATURE：choose color and temperature at first, such as: 65000
K, 75000K or 93000K.
Only if under “USER”mode, can adjust RED, GREEN and
BLUE to meet the color value you need.
LANGUAGE：There are 2 languages provided for choice, English and Chinese
MISCELLANEOUS：to select to enter next page
As follows:
OSD MISCELLANEOUS
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
OSD DURATION: to adjust the duration of OSD from5-100seconds.
OSD AUTO COLOR：If select “YES” it will adjust automatic color system to
the best.
Mode shift between 4:3 and 16:9
EXIT OSD: select “YES”to exit
Inhaltsverzeichnis
Andere Lilliput Monitor Handbücher
Lilliput
Lilliput BM230 Bedienungsanleitung
Lilliput
Lilliput A12 Bedienungsanleitung
Lilliput
Lilliput 569-O/P Bedienungsanleitung
Lilliput
Lilliput FA1019/T Bedienungsanleitung
Lilliput
Lilliput PVM210 Bedienungsanleitung
Lilliput
Lilliput RM-1731S Bedienungsanleitung
Lilliput
Lilliput 667/S Bedienungsanleitung
Lilliput
Lilliput RM7028 Bedienungsanleitung
Lilliput
Lilliput 664/P Bedienungsanleitung
Lilliput
Lilliput 1/C/T Montageanleitung
Lilliput
Lilliput Q7 Bedienungsanleitung
Lilliput
Lilliput 869GL Bedienungsanleitung
Lilliput
Lilliput FA1014 Bedienungsanleitung
Lilliput
Lilliput A11 Bedienungsanleitung
Lilliput
Lilliput 619AT Bedienungsanleitung
Lilliput
Lilliput PVM150S Bedienungsanleitung
Lilliput
Lilliput 663/O/P2 Bedienungsanleitung
Lilliput
Lilliput A7S Bedienungsanleitung
Lilliput
Lilliput FA1000 Bedienungsanleitung
Lilliput
Lilliput Mopro 7 Bedienungsanleitung
