Limbic Media Aurora Pro Bedienungsanleitung
1
Oct 2018 v1
USER MANUAL
AUR-R2-P8D-00-US
AUR-R2-P8D-00-EU
2
3
TABLE OF CONTENTS
Introduction 5
Guide Overview 6
About Aurora Pro 7
Aurora Pro Connector Interface 8
Prepare for an Installation 10
Power Aurora Pro ON/OFF 10
Connect LED Pixels to Built-In RGB connectors 11
Configure Aurora Pro 13
Set Up Aurora Pro Using Built-In RGB connectors (w/out Power Top-Ups) 13
Set Up Aurora Pro Using Built-In RGB connectors (with Power Top-Ups) 14
Configure a Network Distribution Box (NDB) 15
Set Up Aurora Pro with a Single Network Distribution Box (NDB) 20
Set up Aurora Pro with Multiple Network Distribution Boxes (NDBs) 22
Set up Aurora Pro with Network Distribution Boxes (NDBs) and Power Top-Ups 24
Connect and Configure the Aurora Mobile App 25
Download or Update the Aurora Mobile App 25
Connect to Aurora Pro in AP Mode 25
Connect to Aurora Pro in Station Mode 26
Configure the Aurora Mobile App 26
Adjust Device Settings 26
Adjust Live Control Mode 29
Adjust Show Mode 29
Connect and Calibrate Audio Inputs 31
Connect Audio Inputs 31
Connect Consumer-Level Speakers and Audio Devices 31
Connect Pro Audio Equipment 32
Connect a Microphone 33
Calibrate Auto and Manual Gain 34
Calibrate Auto Gain 34
Calibrate Manual Gain 35
Set Up Non-Audio Reactive Mode 36
Set Up DMX and Other Ethernet-Based Protocols 36
Set Up DMX IN 36
Set Up DMX OUT 37
Set Up Ethernet-Based Protocols 37
4
Factory Reset and Upgrade Software 38
Factory Reset Aurora Pro 38
Upgrade Aurora Pro Software 38
Appendices 39
Aurora Terminology 39
Troubleshooting 40
Aurora Pro Patterns and Lighting Parameter Eects 41
Aurora DMX Specification 45
Extended Modes of Interaction 46
Aurora Pro (AUR-R2-P8D-00-US/AUR-R2-P8D-00-EU) Specifications 47
Aurora Pro Power Best Practices 49
Electrical Safety 52
5
INTRODUCTION
Aurora Pro is a standalone, plug-and-play sound reactive lighting controller. Aurora
analyzes audio in real-time to generate dynamic lighting designs.
Innovate in your industry. Public spaces are seeking new ways to connect people
in an increasingly digital world. Choose sophisticated interactive lighting that
engages audiences and positions you as an innovator.
Connect people. Spark deeper connections with a “heads-up” social platform.
Encourage audiences to create lasting memories with their voices, motions, and
social media interactions. Increase visitor turnout and keep audiences coming back
for more.
Avoid unnecessary costs and steep learning curves. Nobody should have to hire
programming experts to create memorable experiences. Aurora creates interactive
lighting out-of-the-box. Easily customize lighting eects using the Aurora Mobile
App. Reconfigure the platform to reinvent displays year after year.
The Aurora Pro Manual is designed for non-technical users installing interactive
lighting for the first time, as well as experienced technicians integrating Aurora Pro
with protocols like DMX, KiNET or Art-Net.
6
GUIDE OVERVIEW
The Aurora Pro Manual describes:
• How to navigate the Aurora Pro connector interface
• Basic installation preparations
• How to set up typical Aurora Pro lighting configurations
• How to connect to and configure the Aurora Mobile App
• How to upgrade Aurora Pro firmware and software
• Aurora Pro specifications, best practices, and troubleshooting
Pro-Tip:
Reading the Aurora Quick Start Guide is highly recommended before reading
this manual.
Questions?
Additional support for Aurora Pro is available at support.limbicmedia.ca
View other documents at support.limbicmedia.ca/guidesmanuals/
7
ABOUT AURORA PRO
Features
• Standalone, portable lighting controller
• Uses patented, sound-responsive algorithms
• Creates 2D- and 3D-mapped patterns
• Oers easy pattern and palette customization from the free Aurora Mobile
App or DMX IN
• Includes multiple audio inputs and thrus for consumer-level and professional
audio equipment
• Supports up to 4000 LED pixels with built-in RGB connectors or up to
25,000 LED pixels using network protocols like DDP, Art-Net and KiNET
LED Fixture Types Supported
Aurora Pro directly controls RGB and RGB LEDs with 8 built-in RGB connectors.
Installers can take advantage of our extensive catalog of LED fixtures and
accessories to scale up installations. Refer to the Aurora Product Guide for a
detailed list.
Aurora Pro supports other lighting equipment using industry standard protocols,
such as DDP, DMX512, Art-Net1, sACN1, or KiNET1LED fixtures. These can be used
alone or in conjunction with LED fixtures.
Maximum Lights Supported
Control up to 600 LED pixels using built-in RGB connectors and Aurora Pro’s
internal power supply.
Control up to 4000 LED pixels using built-in RGB connectors and Power Top-Ups.
Control up to 25,000 LED pixels with network protocols like KiNET or DDP in
conjunction with Network Distribution Boxes (NDBs).
Control 25,000+ LED pixels using custom hardware solutions.
Refer to the Aurora Pro Power Best Practices Appendix to troubleshoot pixel
constraints.
Standard Lighting Protocols Supported
DMX IN
DMX OUT1
Art-Net1
DDP
KiNET1
sACN1
WS2811
1 Contact Limbic Media for details.
8
AURORA PRO CONNECTOR INTERFACE
The Aurora Pro connector interface is complete with multiple audio inputs/outputs,
built-in RGB connectors and buttons. Some of Aurora Pro’s functionality can be
accessed directly from the connector interface.
Fig. 1: Aurora Pro Connector Interface
1. Power connector
The power connector is located at the top left of the front panel. This connects
Aurora Pro to AC power via an IEC power cable.
2. Built-in RGB connectors
Aurora Pro comes with 8 built-in RGB LED connectors numbered ports 1-8. Refer to
the Aurora Product Guide for a catalog of available LED fixtures and accessories.
3. Reset button
The reset button restores Aurora Pro to its default system settings. A paper clip or
pin is required to press the button.
4. USB A connectors
Two USB A connectors connect a USB audio interface, USB-to-Ethernet adapter, or
USB data stick to Aurora Pro.
5. USB micro B connectors
The USB micro B connector is used to update Aurora Pro firmware.
1
2
4
3
678
9
10 11
5
1. Power connector
2. Built-in RGB connectors
3. Reset button
4. USB A connectors
5. USB micro B connectors
6. Audio select button (SEL) and status LEDs
7. ⅛” IN/THRU2audio jack (IN 1 THRU21)
8. ¼” TRS/XLR combo jack IN/THRU2
(IN 2 THRU22)
9. Next mode/pattern (NXT) and status LED
10. Channel select dip switch (CHANNEL SEL)
11. DMX IN OUT/THRU2(IN OUT/THRU)
2 THRU is labeled OUT on older models of Aurora
9
6. Audio select button (SEL) and status LEDs
The audio select button (SEL) cycles through available audio inputs (IN 1, IN 2, MIC).
The audio select status LEDs indicate which input is selected and the current audio
input level:
7. ⅛” IN/THRU audio jack (IN 1 THRU21)
The ⅛” IN/THRU audio jack (IN 1 THRU 1) connects consumer-level audio sources
and speakers to Aurora Pro.
8. ¼” TRS/XLR combo jack IN/THRU (IN 2 THRU22)
The ¼” TRS/XLR combo jack IN/THRU (IN 2 THRU 2) connects pro-audio equipment
such as mixers and external stereo systems to Aurora Pro.
9. Next mode/pattern and status LED
Holding the next mode/pattern button (NXT) down for 5 seconds switches between
Live Control Mode and Show Mode.
Pressing the next mode/pattern button (NXT) cycles through lighting patterns in Live
Control Mode, and previously set lighting cues in Show Mode.
The next mode/pattern status LED indicates Aurora Pro’s mode:
Refer to Configure the Aurora Mobile App to learn more about performance
modes.
10. Channel select dip switch (CHANNEL SEL)
The DMX IN channel select dip switch (CHANNEL SEL) allows you to set the DMX
base channel for DMX control.
11. DMX IN OUT/THRU (IN OUT/THRU)
DMX IN OUT/THRU (IN OUT/THRU) connects DMX controllers, consoles and
fixtures to Aurora Pro. Refer to Set Up DMX and Other Ethernet-Based Protocols
for details.
Color Audio Input Level
Green
Yellow
Red
White
-Inf < Input level < -5dB
-5 dB < Input level < -0.5 dB
-0.5 dB < Input level < 0 dB
System default restore
Color Solid LED Flashing LED
Green
Yellow
Red
White
None
Show Mode
DMX mode
Live Control Mode
System default restore
Show Mode/Live Control Mode
stopped
Show Mode paused³
N/A
Live Control Mode paused³
System update
N/A
³ LED pixels stay ON when the system is paused in Show or Live Control Mode. LED pixels turn OFF
when the system is stopped in Show Mode or Live Control Mode.
10
PREPARE FOR AN INSTALLATION
It is important to properly plan lighting configurations before installing Aurora
Pro. Ensure all fixtures are accounted for prior to installing. Installing and testing
fixture configurations in an accessible area prior to final installation is highly
recommended.
Included Components
• Aurora Pro
• (4) Mounting brackets
• (4) Mounting screws
• (1) Power cable
• (8) Dust caps
• (1) Aurora Quick Start Guide
Power Aurora Pro ON/OFF
Required Components
• Aurora Pro
• Power cable
Method
1. Connect Aurora Pro’s power connector to AC power via the included power
cable. Aurora starts automatically once power is applied.
2. Wait 15 seconds for Aurora Pro to power ON.
3. Remove the power cable to power Aurora Pro OFF.
Warning:
Do not hang Aurora Pro by the built-in RGB connectors. Use proper mounting
features and strain relief on light runs longer than 25 LED pixels.
Inhaltsverzeichnis
Andere Limbic Media Controller Handbücher
