Lincoln Electric IDEALARC CV-400 Bedienungsanleitung

CV-400

Rugged, Prove Co structio

for Wire Weldi g

The rugged C -400 is ready to tackle MIG and cored wire

fabrication and production work in a variety of industries:

transportation, heavy equipment, structural steel, railroad,

furniture, appliances and sheet metal fabrication. Simple

fixed inductance, time-proven technology and heavy-duty

construction will deliver years of reliable performance.

Publication E4.30 11/05

www.lincolnelectric.com

web update 7/08

Adva tage Li col

• Lincoln’s unique fixed inductance design delivers exceptional

short-circuit metal transfer characteristics.

• 115 and 42 wire feeder auxiliary power with circuit breaker

protection.

• Connect wire feeders via either 14-pin MS-type or

terminal strip.

• Internal components, including windings, rectifiers and circuit

boards, are coated to protect against the effects of moisture

and corrosion.

• Electronic and thermostatic protection from current overload and

excessive temperatures. Indicator light lets you know when machine

is reset.

• Three year warranty on parts and labor.

• Seven year warranty on the power rectifier.

MIG WELDERS

TECHNICAL SPECIFICATIONS

PHASE

K1346-22

(w/meters) 230/460/575/3/60

Dime sio s

Product Product Rated Output I put Curre t @ H x W x D Net Weight

Name Number I put Power Curre t/Voltage/Duty Cycle Rated Output Output Ra ge i ches (mm) lbs.(kg)

C -400 K1346-13 230/460/3/60 400A/36 /100% 77/39A 60-500A 27.5 x 22.2 x 32 383

(w/meters) 450A/38 /60% 80/40A 12-42 (699 x 564 x 813) (174)

Output

Input

MIG, Flux-Cored, Gouging

Processes

77/39/31A

80/40/32A

1. Strain Relief for Terminal Strip Connection

2. Analog Amps & Volts Meters

3. Local / Remote Control Switch

4. Input Power On / Off Switch

5. Input Power Pilot Light

6. Output Voltage Control Knob

7. Circuit Breakers

8. Thermal Overload Light

9. Voltmeter Polarity Switch

10. 14 Pin MS Type Connector

A CLOSER LOOK

PERFORMANCE

FEATURES

QUALITY AND RELIABILITY

• Electronic and thermostatic protection from current overload or

excessive temperatures.

• Solid state circuitry provides extra long life during repetitive

applications.

• Three-year warranty on parts and labor.

• Manufactured under a quality system certified to ISO 9001

requirements and ISO 14001 environmental standards.

SYSTEM SELECTION

Ready-Pak®Packages

Take the hassle out of ordering. Order a Ready-Pak pre-assembled welding package.

CV-400

www.lincolnelectric.com

[2]

Shown: CV-400 / LF-72 Ready-PakTM Package

CV-400 / LF-74 Ready-Pak Packa e

Order K2496-1

• CV-400 Power Source (K1346-13)

• LF-74 Bench Model, Heavy Duty

(Heavy Duty Wire Reel Stand)

• .045” Drive Rolls for Solid Wire

• Heavy Duty Wire Reel Stand

• Control Cable – 10 ft. (3.0m)

• Weld Power Cable – 10 ft. (3.0m)

• Work Clamp

• Magnum 400 MIG Gun with 15 ft. cable (4.5m)

• Harris Flowmeter Regulator and Gas Hose

CV-400 / LF-72 Ready-Pak Packa e

Order K2439-1

• CV-400 Power Source (K1346-13)

• LF-72 Bench Model, Heavy Duty

(Heavy Duty Wire Reel Stand)

• .035"-.045” Drive Rolls for Solid Wire

• Heavy Duty Wire Reel Stand

• Control Cable – 10 ft. (3.0m)

• Weld Power Cable – 10 ft. (3.0m)

• Work Clamp

• Magnum 400 MIG Gun with 15 ft. cable (4.5m)

• Harris Flowmeter Regulator and Gas Hose

• Provides line voltage compensation for maintaining weld

consistency, even with changes of ±10%.

• Full output control potentiometer lets operator accurately

regulate power levels.

• Excellent arc stability and weld consistency.

• Quick, simple 14-pin MS-type (amphenol) wire feeder connection.

• Low flat-top case can be placed under a workbench or stacked

on top of each other for smaller footprint.

• Remote control of output is possible via 14 pin connector on the

control panel or terminal strip connection.

• Thermal trip indicator light.

• “Cold” electrode with a solid state

contactor when the trigger is released for added safety.

Key Controls

910

CV-400

www.lincolnelectric.com

[3]

A CLOSER LOOK

Undercarria e

Platform undercarriage with

mountings for two gas cylinders

at rear of welder.

Order K841

Jumper Plu Kit

Required to close the contactor

in the power source when the

power source is used with a

remote output contactor such as

the contactor in the K449 LN-25,

or K1870-1 LN-15 wire feeder.

Order K484

GENERAL OPTIONS

Remote Output Control

Consists of a control box with

choice of two cable lengths.

Permits remote adjustment of

output. 6-pin connection.

Order K857 for 25 ft. (7.6m).

Order K857-1 for 100 ft. (30m).

Remote Control Adapter

Y connection adapter for connect-

ing K857 Remote Output Control

(6 pin plug connection) and wire

feeder input cable (14-pin plug

connection) to power source

14-pin receptacle.

Order K864

RECOMMENDED OPTIONS

CV-400 / LN-742 Wire Feeder

Best for applications where more process control is required –

for arc starting, welding and crater control!

• CV-400 Power Source K1346-13

• LN-742 (Two Roll) Wire Feeder K617-1

• Control Cable – 10 ft. (3.0m) K1819-10

• .045" (1.2mm) Drive Roll &Guide Tube Kit KP653-052S

• Universal Stand K1524-1

• Swivel Platform K1557-1

• Magnum 400 Gun & Cable Assembly K2286-1(1)

and Connector Kit

• 600 Amp Weld Cable K1842-10(2)

• Work Clamp K910-2

• Harris Flowmeter Regulator and Gas Hose K586-1

• Undercarriage (twin cylinder) K841

CV-400 / LN-10 Wire Feeder

Where premium welding performance and control is demanded –

this system delivers!

• CV-400 Power Source K1346-13

• LN-10 Wire Feeder K1559-3

• .045" (1.2mm) Drive Roll &Guide Tube Kit K1505-045S

• Swivel Platform K1557-1

• Magnum 400 Gun & Cable Assembly K471-21(1)

and Connector Kit

• 600 Amp Weld Cable K1842-10(2)

• Work Clamp K910-2

• Harris Flowmeter Regulator and Gas Hose K586-1

• Undercarriage (twin cylinder) K841

CV-400 / DH-10 Wire Feeder

For maximum welding flexibility – select the DH- 0 dual feeder.

Weld with two different types and sizes of wire – with two different

welding procedures!

• CV-400 Power Source K1346-13

• DH-10 Wire Feeder K1499-3

• .045" (1.2mm) Drive Roll &Guide Tube Kit KP1505-045S(2)

• Magnum 400 Gun & Cable Assembly K471-21(1)(2)

and Connector Kit

• 600 Amp Weld Cable K1842-10(2)

• Work Clamp K910-2

• Harris Flowmeter Regulator and Gas Hose K586-1

• Undercarriage (twin cylinder) K841

(1)Fully assembled, gun connector included.

(2)Two required.

Typical MIG Welding Syste s

THE LINCOLN ELECTRIC COMPANY

22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com

CV-400 with meters 230/460/3/60 K1346-13

CV-400 with meters 230/460/575/3/60 K1346-22

Ready-Pak®Packa e

CV-400/LF-72 K2439-1

CV-400/LF-74 K2496-1

Recommended General Options

Remote Output Control, 25 ft. (7.6m) K857

100 ft. (30m) K857-1

Remote Control Adapter K864

Undercarriage K841

umper Plug Kit K484

Recommended Wire Feeder Options

LF-72, LF-74 See publication E8.11

LN-742 See publication E8.20

LN-8 See publication E8.30

LN-9 See publication E8.50

LN-9 GMA See publication E8.50

LN-10 See publication E8.200

DH-10 See publication E8.200

LN-15 See publication E8.60

LN-25 See publication E8.100

Cobramatic®See publication E8.300

NA-3 See publication E9.10

NA-5 See publication E9.30

NA-5R See publication E9.45

TOTAL:

CV-400 ORDER FORM

PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE

CUSTOMER ASSISTANCE POLICY

The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the

needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond

to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability,

with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to

such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has

been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility

of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

Andere Lincoln Electric Schweißsystem Handbücher

Lincoln Electric

Lincoln Electric 10630 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Demo Zone K1854-2 Bedienungsanleitung

Lincoln Electric

Lincoln Electric OUTBACK SVM204-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric SPREADARC 11006 Bedienungsanleitung

Lincoln Electric

Lincoln Electric PRECISION TIG 375 IM703-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric IDEALARC CV-305 Bedienungsanleitung

Lincoln Electric

Lincoln Electric FlexCut 80 CCC Bedienungsanleitung

Lincoln Electric

Lincoln Electric SAF-FRO DIGISTEEL III 320C Bedienungs- und Wartungshandbuch

Lincoln Electric

Lincoln Electric POWER WAVE S500CE IM10123 Bedienungsanleitung

Lincoln Electric

Lincoln Electric DUAL VANTAGE 800 Bedienungsanleitung

Lincoln Electric

Lincoln Electric VRTEX TRANSPORT+ Bedienungsanleitung

Lincoln Electric

Lincoln Electric SQUARE WAVE TIG 255 SVM100-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric Vantage 549 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWERTEC 305S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HOT ROD 500S Bedienungsanleitung

Lincoln Electric

Lincoln Electric LINC 405 Bedienungsanleitung

Lincoln Electric

Lincoln Electric speedtec 200c Bedienungsanleitung

Lincoln Electric

Lincoln Electric 11776 Bedienungsanleitung

Lincoln Electric

Lincoln Electric VRTEX 360 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Power MIG 180C Bedienungsanleitung

Lincoln Electric

Lincoln Electric PRECISION TIG 375 IM909 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Square Wave TIG 200 Bedienungsanleitung

Lincoln Electric

Lincoln Electric PRO-CUT IM665 Bedienungsanleitung

Lincoln Electric

Lincoln Electric FLEXTEC 450 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Everlast

Everlast POWER MTS 221STi Bedienungsanleitung

Kipor

Kipor KDE180XW Bedienungsanleitung