Lincoln Electric WF24 Bedienungsanleitung

IM3095

10/2020

REV03

WF24 & WF24S

OPERATOR’S MANUAL

MANUALE OPERATIVO

MANUAL DE INSTRUCCIONES

MANUEL D’UTILISATION

BRUKSANVISNING

GEBRUIKERSHANDLEIDING

BRUKSANVISNING

KÄYTTÖOHJE

MANUAL DE INSTRUÇÕES

MANUAL DE UTILIZARE

Lincoln Electric Bester Sp. z o.o.

ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland

IM3095

10/2020

REV03

WF24 & WF24S

OPERATOR’S MANUAL

ENGLISH

Lincoln Electric Bester Sp. z o.o.

ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland

English I English

12/05

THANKS! For having choosen the QUALITY of the Lincoln Electric products.

Please Examine Package and Equipment for Damage. Claims for material damaged in shipment must be notified

immediately to the dealer.

For future reference record in the table below your equipment identification information. Model Name, Code & Serial

Number can be found on the machine rating plate.

Model Name:

………………...…………………………….…………………………………………………………………………………………

Code & Serial number:

………………….……………………………………………… …………………………………………………….……………

Date & Where Purchased:

…………………………………………………………………. ……………………….…………………………………………

ENGLISH INDEX

Technical Specifications...............................................................................................................................................................1

Electromagnetic Compatibility (EMC) ..........................................................................................................................................2

Safety............................................................................................................................................................................................3

Installation and Operator Instructions ..........................................................................................................................................5

WEEE.........................................................................................................................................................................................11

Spare Parts.................................................................................................................................................................................11

REACh........................................................................................................................................................................................11

Authorized Service Shops Location...........................................................................................................................................11

Electrical Schematic...................................................................................................................................................................11

Accessories ................................................................................................................................................................................12

English English

Technical Specifications

NAME INDEX

WF24 W000403599

WF24S W000403600

INPUT VOLTAGE WIRE FEED SPEED

34-44 Vac 1.0-20 m/min

RATED OUTPUT AT 40°C

Duty Cycle

(based on a 10 min. period) Output Current

100%

60%

385 A

500 A

OUTPUT RANGE

Welding Current Range Maximum Open Circuit Voltage

20-500 A 113 Vdc or Vac peak

ROLLS / WIRE DIAMETER

Drive Rolls Drive roll diameter Solid Wires Cored wires Aluminium wires

WF24 4 Ø 37 mm 0.6 to 1.6 1.2 to 2.4 1.0 to 1.6

WF24S

PHYSICAL DIMENSIONS

Height Width Length Weight

WF24 440 mm 270 mm 640 mm 17 kg

WF24S

Protection Rating Maximum Gas Pressure Operating Temperature Storage Temperature

IP23 0,5MPa (5 bar) from -10°C to +40°C from -25°C to 55°C

English English

Electromagnetic Compatibility (EMC)

01/11

This machine has been designed in accordance with all relevant directives and standards. However, it may still generate

electromagnetic disturbances that can affect other systems like telecommunications (telephone, radio, and television) or

other safety systems. These disturbances can cause safety problems in the affected systems. Read and understand this

section to eliminate or reduce the amount of electromagnetic disturbance generated by this machine.

This machine has been designed to operate in an industrial area. To operate in a domestic area it is necessary

to observe particular precautions to eliminate possible electromagnetic disturbances. The operator must install

and operate this equipment as described in this manual. If any electromagnetic disturbances are detected the

operator must put in place corrective actions to eliminate these disturbances with, if necessary, assistance from

Lincoln Electric.

Before installing the machine, the operator must check the work area for any devices that may malfunction because of

electromagnetic disturbances. Consider the following.

Input and output cables, control cables, and telephone cables that are in or adjacent to the work area and the machine.

Radio and/or television transmitters and receivers. Computers or computer controlled equipment.

Safety and control equipment for industrial processes. Equipment for calibration and measurement.

Personal medical devices like pacemakers and hearing aids.

Check the electromagnetic immunity for equipment operating in or near the work area. The operator must be sure that

all equipment in the area is compatible. This may require additional protection measures.

The dimensions of the work area to consider will depend on the construction of the area and other activities that are

taking place.

Consider the following guidelines to reduce electromagnetic emissions from the machine.

Connect the machine to the input supply according to this manual. If disturbances occur if may be necessary to take

additional precautions such as filtering the input supply.

The output cables should be kept as short as possible and should be positioned together. If possible connect the work

piece to ground in order to reduce the electromagnetic emissions. The operator must check that connecting the work

piece to ground does not cause problems or unsafe operating conditions for personnel and equipment.

Shielding of cables in the work area can reduce electromagnetic emissions. This may be necessary for special

applications.

WARNING

EMC classification of this product is class A in accordance with electromagnetic compatibility standard EN 60974-10 and

therefore the product is designed to be used in an industrial environment only.

WARNING

The Class A equipment is not intended for use in residential locations where the electrical power is provided by the public

low-voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in those locations,

due to conducted as well as radiated disturbances.

English English

Safety

11/04

WARNING

This equipment must be used by qualified personnel. Be sure that all installation, operation, maintenance and repair

procedures are performed only by qualified person. Read and understand this manual before operating this equipment.

Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment.

Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages

caused by improper installation, improper care or abnormal operation.

WARNING: This symbol indicates that instructions must be followed to avoid serious personal injury, loss

of life, or damage to this equipment. Protect yourself and others from possible serious injury or death.

READ AND UNDERSTAND INSTRUCTIONS: Read and understand this manual before operating this

equipment. Arc welding can be hazardous. Failure to follow the instructions in this manual could cause

serious personal injury, loss of life, or damage to this equipment.

ELECTRIC SHOCK CAN KILL: Welding equipment generates high voltages. Do not touch the electrode,

work clamp, or connected work pieces when this equipment is on. Insulate yourself from the electrode,

work clamp and connected work pieces.

ELECTRICALLY POWERED EQUIPMENT: Turn off input power using the disconnect switch at the fuse

box before working on this equipment. Ground this equipment in accordance with local electrical

regulations.

ELECTRICALLY POWERED EQUIPMENT: Regularly inspect the input, electrode, and work clamp

cables. If any insulation damage exists replace the cable immediately. Do not place the electrode holder

directly on the welding table or any other surface in contact with the work clamp to avoid the risk of

accidental arc ignition.

ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS: Electric current flowing through any

conductor creates electric and magnetic fields (EMF). EMF fields may interfere with some pacemakers

and welders having a pacemaker shall consult their physician before operating this equipment.

CE COMPLIANCE: This equipment complies with the European Community Directives.

ARTIFICIAL OPTICAL RADIATION: According with the requirements in 2006/25/EC Directive and EN

12198 Standard, the equipment is a category 2. It makes mandatory the adoption of Personal Protective

Equipment (PPE) having filter with a protection degree up to a maximum of 15, as required by EN169

Standard.

FUMES AND GASES CAN BE DANGEROUS: Welding may produce fumes and gases hazardous to

health. Avoid breathing these fumes and gases. To avoid these dangers the operator must use enough

ventilation or exhaust to keep fumes and gases away from the breathing zone.

ARC RAYS CAN BURN: Use a shield with the proper filter and cover plates to protect your eyes from

sparks and the rays of the arc when welding or observing. Use suitable clothing made from durable flame-

resistant material to protect you skin and that of your helpers. Protect other nearby personnel with

suitable, non-flammable screening and warn them not to watch the arc nor expose themselves to the arc.

English English

WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION: Remove fire hazards from the welding area

and have a fire extinguisher readily available. Welding sparks and hot materials from the welding process

can easily go through small cracks and openings to adjacent areas. Do not weld on any tanks, drums,

containers, or material until the proper steps have been taken to insure that no flammable or toxic vapors

will be present. Never operate this equipment when flammable gases, vapors or liquid combustibles are

present.

WELDED MATERIALS CAN BURN: Welding generates a large amount of heat. Hot surfaces and

materials in work area can cause serious burns. Use gloves and pliers when touching or moving materials

in the work area.

CYLINDER MAY EXPLODE IF DAMAGED: Use only compressed gas cylinders containing the correct

shielding gas for the process used and properly operating regulators designed for the gas and pressure

used. Always keep cylinders in an upright position securely chained to a fixed support. Do not move or

transport gas cylinders with the protection cap removed. Do not allow the electrode, electrode holder,

work clamp or any other electrically live part to touch a gas cylinder. Gas cylinders must be located away

from areas where they may be subjected to physical damage or the welding process including sparks and

heat sources.

MOVING PARTS ARE DANGEROUS: There are moving mechanical parts in this machine, which can

cause serious injury. Keep your hands, body and clothing away from those parts during machine starting,

operating and servicing.

SAFETY MARK: This equipment is suitable for supplying power for welding operations carried out in an

environment with increased hazard of electric shock.

The manufacturer reserves the right to make changes and/or improvements in design without upgrade at the same time the

operator’s manual.

English English

Installation and Operator Instructions

Read this entire section before installation or operation of

the machine.

Location and Environment

This machine will operate in harsh environments.

However, it is important that simple preventative

measures are followed to assure long life and reliable

operation:

Do not place or operate this machine on a surface with

an incline greater than 15° from horizontal.

Do not use this machine for pipe thawing.

This machine must be located where there is free

circulation of clean air without restrictions for air

movement to and from the air vents. Do not cover the

machine with paper, cloth or rags when switched on.

Dirt and dust that can be drawn into the machine

should be kept to a minimum.

This machine has a protection rating of IP23. Keep it

dry when possible and do not place it on wet ground

or in puddles.

Locate the machine away from radio controlled

machinery. Normal operation may adversely affect

the operation of nearby radio controlled machinery,

which may result in injury or equipment damage.

Read the section on electromagnetic compatibility in

this manual.

Do not operate in areas with an ambient temperature

greater than 40°C.

Duty cycle and Overheating

The duty cycle of a welding machine is the percentage of

time in a 10 minute cycle at which the welder can operate

the machine at rated welding current.

Example: 60% duty cycle:

Welding for 6 minutes. Break for 4 minutes.

Excessive extension of the duty cycle will cause the

thermal protection circuit to activate.

The machine is protected from overheating by a

thermostat. When the machine is overheated the output

of the machine will turn "OFF", and the Thermal Indicator

Light (on front panel of wire feeder) will turn "ON". When

the machine has cooled to a safe temperature the

Thermal Indicator light will go out and the machine may

resume normal operation. Note: For safety reasons the

machine will not come out of thermal shutdown if the

trigger on the welding gun has not been released.

Minutes or decrease

duty cycle

Input Supply Connection

Check the input voltage, phase, and frequency of the

power source that will be connected to this wire feeder.

The allowable input voltage of the power source is

indicated on the rating plate of the wire feeder. Verify the

connection of grounding wires from the power source to

the input source.

Gas Connection

A gas cylinder must be installed with a proper flow

regulator. Once a gas cylinder with a flow regulator has

been securely installed, connect the gas hose from the

regulator to the machine gas inlet connector. Refer to

point [8] of the images below. The wire feeder supports

all suitable shielding gases including carbon dioxide,

argon and helium at a maximum pressure of 5,0 bar.

Output Connections

Refer to point [1] of the images below.

Controls and Operational Features

Figure 1.

1. EURO Socket: For connecting welding torch.

2. WFS (Wire Feed Speed) Control Knob:

It enables continuous control of wire

feeding speed in the range from 1.0 to

20m/min with manual mode or correction of the speed

automatically matched by the machine in the range

50% at synergic mode.

WARNING

Before welding beginning and during Cold Inch Switch

using the Wire Feed Slow Run Control Knob [12] has also

an influence on the wire feeding speed.

3. Thermal Overload Indicator: This lamp

will light up when the machine is

overheated and the output has been

turned off. Leave the machine on to allow the internal

components to cool, when the lamp turns off normal

operation is possible.

English English

4. Digital Display Panel.

WF24S:

Display A: It shows the actual welding current value

(in A), and after finishing welding process, it shows the

average value of the welding current. When the WFS

value is changed [2], the display shows the value of

adjusted WFS (in m/min) - for manual mode or

correction of the speed automatically matched by the

machine, in the range 0.75-1.25 at synergic mode.

Display V: It shows the actual value of welding

voltage (in V), and after finishing welding process, it

shows the average value of welding voltage. When

the WFS value is changed [2], the display is blank.

Work Indicators: These lamps shows the work mode

of the machine:

SYNERGIC When lit, the machine works in Synergic

mode (automatic mode).

When lit, the machine works in Manual

mode.

Select the desired work with the "Welding Material and

Gas Mix Choice Knob" [11].

WF24:

Display A: It shows the actual welding current value

(in A), and after finishing welding process, it shows the

average value of the welding current.

Display V: It shows the actual value of welding

voltage (in V), and after finishing welding process, it

shows the average value of welding voltage.

5. Quick Connect Couplings (For water cooled model

only): For connecting water cooled torches.

Warm water from torch.

Cool water to torch.

Figure 2.

6. Quick Connect Couplings (For water cooled model

only): If water cooled torches are used, connect water

lines from water cooler here. Refer to torch and water

cooler guidelines for recommended cooling liquid and

flow rates.

WARNING

Max cooling liquid pressure is 4 Bar.

7. Fast-Mate Adapter: Input power connection.

8. Gas Connector: Connection for gas line.

9. Amphenol Connection: 8-Pin connection to power

source.

Figure 3.

Figure 4.

10. Wire Diameter Knob: It allows the choice of the wire

diameter requested for the desired welding process.

This feature is available only for the synergic mode.

11. Welding Material and Gas Mix Choice Knob: This

knob enables the choice of:

-The welded material and its appropriate gas mixture.

-The manual / synergic work mode.

12. Wire Feed Slow Run Control Knob: It enables control

of wire feeding speed before welding beginning, in the

range from 0.1 to1.0 of the value set by the "Wire

Feed Speed Control Knob" [2].

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Lincoln Electric Schweißsystem Handbücher

Lincoln Electric

Lincoln Electric POWER WAVE455M Bedienungsanleitung

Lincoln Electric

Lincoln Electric MAGNUM PRO 350 Bedienungsanleitung

Lincoln Electric

Lincoln Electric RED-D-ARC IM648-B Bedienungsanleitung

Lincoln Electric

Lincoln Electric PF41 Bedienungsanleitung

Lincoln Electric

Lincoln Electric VANTAGE 600 SD Bedienungsanleitung

Lincoln Electric

Lincoln Electric Vernon Tool MasterPipe Compact Profiler Handbuch

Lincoln Electric

Lincoln Electric SAE-400 SEVERE DUTY IM727 Bedienungsanleitung

Lincoln Electric

Lincoln Electric VANTAGE 410 CE Bedienungsanleitung

Lincoln Electric

Lincoln Electric RANGER 405D Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWERTEC 305S Bedienungsanleitung

Lincoln Electric

Lincoln Electric LN-25 PRO IM901-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric IDEALARC IM10018-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric MULTI-SOURCE SVM155-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric RED-D-ARC LN-25 PRO EXTREME Bedienungsanleitung

Lincoln Electric

Lincoln Electric LN-15 WIRE FEEDER SVM166-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric TOMAHAWK 1025 Bedienungsanleitung

Lincoln Electric

Lincoln Electric TITAN 701 II Series Bedienungsanleitung

Lincoln Electric

Lincoln Electric IDEALARC DC 1000 SVM123-A Bedienungsanleitung

Lincoln Electric

Lincoln Electric Precision TIG 375 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Invertec 135S Bedienungsanleitung

Lincoln Electric

Lincoln Electric power wave ac/dc 1000 sd Bedienungsanleitung

Lincoln Electric

Lincoln Electric DUAL VANTAGE 700 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Frontier 400X Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC SVM199-A Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Everlast

Everlast POWER MTS 221STi Bedienungsanleitung

Kipor

Kipor KDE180XW Bedienungsanleitung