BOC is a trading name of BOC Limited, a Linde company. © BOC Limited 2022 ABN95000029729. Reproduction without permission is strictly
prohibited. Details given in this document are believed to be correct at the time of printing 0522. Whilst proper care has been taken in the
preparation, no liability for injury or damage resulting from its improper use can be accepted. MP22-0400 FDAUS 26310
1. Remove light blue plastic cap from threaded valve
Connection (B). Connect the relevant outlet hose
connection(C). DO NOT OVER TIGHTEN.
2. To open the valve, press the blue safety interlock button
(D) and then slowly lift the actuator lever (E).
3. Slowly turn the ow control knob (F) in a clockwise
direction to increase gas ow to the desired level (litres per
minute) shown on indicator (G) at the notch. The EVOS ViPR is
ready to deliver gas.
1. To shut o the valve slowly lower the actuator lever (E)
to its closed position, ensuring it engages with the safety
interlock mechanism (D).
2. Shut down the regulator by slowly turning the ow control
knob (F) in an anti-clockwise direction, until the indicator shows
OFF. DO NOT GO BELOW OFF OR APPLY EXCESSIVE TORQUE.
3. Disconnect the outlet hose connection (C) when the
cylinder is empty or a dierent gas is required. The cylinder
package is now safe to be stored or transported ahead of its
next intended use.
IMPORTANT SAFETY NOTE: Whether the cylinder is in use or not, it should be restrained to avoid rotation or tipping.
Start-up Shut-o
