Lindy IPower Pro 8 Bedienungsanleitung

IPower Switch Pro 8

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale Italiano

No. 32659

lindy.com

User Manual English

Introduction

Thank you for purchasing the IPower Switch Pro 8. This product has been designed to provide trouble free, reliable

operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use,

please read this manual carefully and retain it for future reference.

This IPower Switch Pro 8 is an advanced power management solution which connects to your existing network

infrastructure to provide convenient remote control power management and monitoring of equipment. System

administrators can control the power to multiple servers, workstations, hubs, switches, routers etc allowing reboot

and power-on and off functions, via a simple to use browser interface.

Package Contents

IPower Switch Pro 8

Brackets and Screws for mounting

Lindy Quick Installation Guide, OpenSource Statement

Features

1. Remote management switch for up to 8 computers or other devices

2. Daily, Weekly, Monthly & Yearly Power Consumption Data

3. IPv4 and IPv6 Support

4. SSL Web Browser (Https) for set up and operation

5. Quick and easy to install

Installation

Power on your PDU and connect the Ethernet cable. Press and hold the “Function” button and release the button

after 2 beeps, the “Meter” will display 4 numbers in sequence; this is the PDU’s IP address. If the PDU can’t get an

IP from the DHCP server, the IP will stay as the default - 192.168.0.216. Make sure that servers IP address is in

the same subnet as the PDU’s IP. Input IP address to your web browser and then check the PDU information.

1. Default Login Name is “snmp” and default Login Password is “1234”.

User Manual English

2. You can add up to 8 user accounts.

a. Admin (Full authority, control and configuration permission). Default Login Name“snmp”, default

b. Power User (Monitoring PDU, control the specific outlets. No permission for configurations).

Default Login Password “password”.

c. View Only (Monitoring PDU. No permission to control or configurate the PDU)

Information - Overview

On this tab you will find a summary of all values, event logs and the outlet status.

User Manual English

Information –System

On this tab you will find all necessary information regarding system, network and SNMP.

Information –Event Log

On this tab you will find all event logs. It’s possible to log up to 5000 entries.

User Manual English

Information –Data Log

On this tab you will find all data logs. It’s possible to log up to 5000 entries.

Management –Control

This tab is for controlling a single or group outlets.

ATS Primary Input Selection: Select one of the input sources as primary (Support ATS mode only)

User Manual English

Management –Schedule

On this tab it’s possible to add and modify the schedule settings by date and time for all outlets or outlet groups.

Management –Ping Action

This tab can be used to reboot the locked device by pinging its IP.

User Manual English

Management –Event Action

This tab allows you to configure the outlet actions for current, temperature and humidity over threshold.

Receive Trap OID equal to: Users can input the private OID to trigger the specified outlet action.

Management –Device

Maximum length of characters for outlet names: 36

Maximum time for delay (on/off): 9999 seconds

After Restart:

Define the outlet action after power restart.

Last Status: After power restart, outlets remain the same power status.

ON: Turn on outlets after power restart.

OFF: Turn off outlets after power restart.

Please Note:

After the PDU is plugged into mains power, the system will start to sequentially turn on the output sockets

according to the pre-set delay time in the PDU web interface. The factory default setting for delay time is one

second for each outlet; therefore the 8 ports will take 8 seconds to complete start-up procedure.

Before the sequence procedure is completed, if a PDU is unplugged from the power source, the outlets which are

not turned on will be regarded as remaining at the power-off status. Next time the PDU is plugged into mains

power, these outlets will not be automatically turned on. These outlets can only be turned on by the web interface.

Reset Accumulated Energy: Subtotal for energy (kWh). Users can reset it to 0 and have the PDU restart

calculating.

Carbon Emission Rate: Users can check this parameter through power plant.

User Manual English

Management –Threshold

This tab is to configurate thresholds for current, temperature and humidity.

User Manual English

Configuration –Network

This tab is for IP Address configurations. The default setting for the way to get an IP address is DHCP. If the PDU

can´t get the IP from DHCP server, the IP address will stay at 192.168.0.216

The maximum length of the host name is 36 characters.

Configuration –Security

This tab is to configurate the setup for Web, SSL, SSH and Telnet. For SSH and Telnet the default user name is

“snmp” and the password is “1234”.

Inhaltsverzeichnis

Andere Lindy Schalten Handbücher

Lindy

Lindy 32 983 Bedienungsanleitung

Lindy

Lindy 32828 Bedienungsanleitung

Lindy

Lindy SC5-4xIP Bedienungsanleitung

Lindy

Lindy 38260 Bedienungsanleitung

Lindy

Lindy 39639 Bedienungsanleitung

Lindy

Lindy 42340 Bedienungsanleitung

Lindy

Lindy 38273 Bedienungsanleitung

Lindy

Lindy 42802 Bedienungsanleitung

Lindy

Lindy 32353 Bedienungsanleitung

Lindy

Lindy 39336 Bedienungsanleitung

Lindy

Lindy 39330 Bedienungsanleitung

Lindy

Lindy 42340 Bedienungsanleitung

Lindy

Lindy 32529 Bedienungsanleitung

Lindy

Lindy 32937 Bedienungsanleitung

Lindy

Lindy Presentation Switch Pro Bedienungsanleitung

Lindy

Lindy CPU Switch Smart DVI Kurzanleitung

Lindy

Lindy KVM Switch Classic Bedienungsanleitung

Lindy

Lindy 32596 Bedienungsanleitung

Lindy

Lindy 32327 Bedienungsanleitung

Lindy

Lindy 39540 Bedienungsanleitung

Lindy

Lindy 38032 Bedienungsanleitung

Lindy

Lindy 32330 Bedienungsanleitung

Lindy

Lindy 42320 Bedienungsanleitung

Lindy

Lindy 25045 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung