●HDMI 2.0a compliant
● Supports 4K2K@60 4:4:4 8bits
●Supports HDR*, which is 4K2K@60 4:2:0 10bits**
●Extends HDMI signal up to 60m (198ft) from the HDMI source at Full HD 1080p 48-bit, 35m (114ft) at
4K2K@60 444 (4K-HDR Technology)
●Supports PoC(Power over Cable) which can power both units from TX or RX side with power supply
●HDCP & EDID Bypass
●CEC support
●Auto equalization
●Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
●DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
●Supports full frequency IR signal from 20KHz to 60KHz
●Bi-directionalIR path-through
●Full Duplex RS-232 control up to 115,200 bps through connector
●Wall mounting housing design for easy and robust installation
●Video latency less than 20 us.
1
INTRODUCTION
FEATURES
The HDEXT1-4KHDR 4K-HDR HDMI Extender over Single CAT5/5e/6 with HDBaseT-Lite, RS-232,
Bid-directional IR &PoC boosts up your video/audio transmission distance to 60m (198ft) in HDTV 1080p with
48-bit color depth and 35m (114ft) at 4K-HDR. HDEXT1-4KHDR has new generation technology which makes
sure the HDBaseT extender can support HDMI2.0a and HDC2.2. HDEXT1-4KHDR also supports the most
advanced 3D video format complaint with HDMI specification and therefore guarantees the highest 3D video
compatibility on the market. With only one cost-effective CAT5/5e/6 cable, users can readily extend HDTV sources
from DVD players, Blu-ray Disc players, PS4, PC and any other kinds of sources compliant with TMDS to distant
display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. With the advanced design for the
latest HDMI technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility
are all further insured. HDEX1-4KHDR is also equipped with bi-directional IR pass-through path and RS-232 serial
port control. These bonus features allow users to boost RS-232 and IR control distance up to 60m (198ft) through
only single CAT5/5e/6 cable with HDMI signals. In addition, HDEXT1-4KHDR also supports PoC (Power over
Cable) which canpower both units from either TX or RX with power supply.
The HDEXT1-4KHDR includes two units: transmitting unit HDEXT1-4KHDR-TX and receiving unit
HDEXT1-4KHDR-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR control packets
and carry the signals via one cost effective CAT5/5e/6 cable. The receiving unit is responsible for equalizing the
transmitted HDMI signal and reconstructing IR and serial control signals. HDEXT1-4KHDR offers the most
convenient solution for digital signage with long distance A/V transmission path.
* HDR = High Dynamic Range
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4
8bits is 594MHz.
