5
During transportation, the machine should be carefully handled and do not put it upside down to prevent from damaging to
the shell and inside. The packaged machine should be stored in a ventilated warehouse without corrosive gas. If it needs to
be stored in open air temporarily, measurement against raining is needed.
Notice for Installment
1. The supply voltage should comply with the working voltage of the appliance.
2. During installation and operation, keep your hands dry. Plugs and switches etc. should be in dry contact.
3. The appliance is equipped with an earth bolt at its back, which should be connected with copper wire no less than
1.5mm² and earth wire that conforming to safety regulations reliably.
4. After installation, check that whether the connection is loose, whether the voltage is normal and whether the safety
grounding is reliable.
5. The appliance should be positioned at a stable area with a minimum clearance of 10cm away from non-combustible
substances (e.g. walls, windows etc.) on both sides, and 20cm at back side.
6. The fixed arrangement of wire should be equipped with an all-pole disconnecting switch with a contact opening of
3mm on its poles. It is advisable to install a grounding leakage protection switch. Do not pile up sundries in front of the
switch, for convenient operation sake.
7. Vicinity of the mounting position should not store flammable or explosive objects.
8. Installation of the appliance should be done by professional technicians.
Special Notice
1. This product is a commercial machine that needs to be operated by trained cook, not applicable for household use.
2. Do not sway or tilt the appliance during operation.
3. Do not dismantle or self-modify the machine. Dismantlement and self-modification may cause casualty.
4. Do not open the housing of the machine. This product contains high-voltage circuit, housing dismantlement may cause
electric shock.
5. Before cleaning, unplug and cut off the power supply.
6. During cleaning, do not aim at the appliance with water jet. Surfaces could be cleaned with soft towel. Water may
conduct electricity, that may cause electric shock due to leakage.
7. Do not pat the product or put any heavy objects onto it. Abnormal operation may cause damage and danger.
8. High temperature may cause scald. Do not touch the appliance with hands directly due to high temperature during or
after operation.
9. To prevent damage, turn off the switch ASAP when near the thunder zone.
10. After working, turn off the switch.
11. To avoid hazard caused by false reset of the thermal breaker, do not supply the appliance with external switch device,
e.g. Timer, or connect the appliance to circuit connected or disconnected by general components at regular time.
12. To avoid hazard caused by false reset of the thermal breaker, do not supply the appliance with external switch device,
e.g. Timer, or connect the appliance to circuit connected or disconnected by general components at regular time.
Working Instructions & Operation Flow
1. Before using, check that whether the power installation is correct. Making sure that the supply voltage complies with
the working voltage of the appliance.
2. Turn on the power switch, the green indicator illuminates, which indicates that the appliance is energized. Rotate the
thermostat clockwise to align the desired temperature scale value with the dot, at this time, the yellow indicator
illuminates, the heating elements are working. When desired temperature is reached, the thermostat will cut off the
power supply automatically with the yellow indicator off, the heating elements stop working. Once the temperature
drops a bit, the thermostat will connect the power supply automatically, the yellow indicator illuminates and the
heating elements restart working with the temperature rising. The procedure circulates to ensure the temperature
keep constant within the set range.
3. Griddle plate temperature can be freely adjusted at a certain range in accordance with food type to get an ideal effect.
