Listo OP320 Bedienungsanleitung
RS232/RS422, LCD Display with Backlight STN
RS232/RS422/RS485, 16 Button Lamps,
320x240 Resolution, LCD Display with Backlight STN
OP320
OP320-A-S
RS232/RS422, LCD Display with Backlight STN
OP320-S
OP Series HARDWARE MANUAL
Doc Ref: LMAN011_R2V2
OP User Manual Page 2 of 100 LMAN011_R2V2
OP series USER MANUAL
Index Page
Chapter 1 Summary of Operator Panels
1-1 Function 5
1-2 General specification 6
1-3 Product types 7
1-4 Name
1-4-1 OP320/OP320-S 8
1-4-2 OP320-A/OP320-A-S 10
1-4-3 OP520 12
1-5 Interface definition and connection diagram
1-5-1 OP320 14
1-5-2 OP320-S 15
1-5-3 OP320-A 17
1-5-4 OP320-A-S 18
1-5-5 OP520
1-6 Sizes and installing methods 22
Chapter 2 Editor Software OP20
2-1 Basic summary of OP20
2-1-1 About the project and the screen 23
2-1-2 The content of screen 24
2-1-3 The use flow of OP20 24
2-2 Edit the user’s screen
2-2-1 Create a project 25
2-2-2 Make a basic screen 27
2-2-3 The system parameter of OP20 23
2-2-4 Text 28
2-2-5 Function key (screen jump) 29
2-2-6 Data display window 34
2-2-7 Data set window 37
2-2-8 Status lamps 40
2-2-9 Function key (switch quantity operation) 44
2-2-10 Trenddiagram 46
2-2-11 Bar diagram 47
2-2-12 Diagram display 48
2-2-13 Dynamic messages 49
2-2-14 Alarm list 52
2-3 Save a project 53
2-4 Download the screen 54
OP User Manual Page 3 of 100 LMAN011_R2V2
Chapter 3 Operation methods of OP320
3-1 Online communication 55
3-2 Shift the screen 56
3-3 System’s password 57
3-4 Modify the data 59
3-5 Switch value operating 59
Chapter 4 New addition function of OP520
4-1 Setting general function key 61
4-1-1 Setting a coil’s function 62
4-1-2 Screen jump function 63
4-1-3 Advanced functions 64
4-2 Status lamp 65
4-3 Examples of global function key and button
status lamp 66
4-4 Inside clock (optional) 68
Chapter 5 Application examples of OP520
5-1 Examples 70
5-2 Make a screen 72
Chapter 6 OP320-S, OP320-A
6-1 OP320 73
6-2 OP320-A/OP320-A-S 73
Chapter 7 PLC’s connection method
7-1 XinjeFCseriesPLC 75
7-2 Mitsubishi FX series PLC 77
7-3 Siemens S7-200 series PLC 79
7-4 Omron C series PLC 80
7-5 Koyo S series PLC 82
7-6 Schneider NEZA series PLC 84
7-7 DELTA DVP series PLC 85
7-8 LG Master-K series PLC 86
7-9 Matsushita FP series PLC 88
7-10 FACON FB series PLC 90
7-11 Kenyence series PLC 92
OP User Manual Page 4 of 100 LMAN011_R2V2
1 SummaryofOperatorPanels
1-4 Name
1-5 Interface definition and connection diagram
1-1 Function
1-2 General specification
1-3 Product types
OP User Manual Page 5 of 100 LMAN011_R2V2
1-1 Function
The OP series is a mini human machine interface
The OP320 display has the following:
The communication port is RS232/RS422
Seven keys can be defined as function keys, and they can substitute some machine keys
on the control table
LCD display with backlight STN. It can display 24 characters × 4 lines, i
The OP320-S display has the following:
The communication port is RS232/RS422
LCD display with backlight STN. It can display 24 characters × 4 lines.
The OP320-A display has the following:
20 keys can be defined as function keys (12 of them can be defined as digital keys and for
other use), and they can substitute some machine buttons on the control table
Communication format , RS232/RS422
LCD display with backlight STN. It can display 24 characters × 4 lines.
The OP320-A-S display has the following:
The communication format is , RS232/RS422
The OP520 display has the following:
42 film buttons: 10 number keys, 32 function keys, in these function keys 16 can be
defined with the card.
There are 16 button lamps on the panel, which can be used to status PLC’s status
The communication format is RS232/RS422/RS485
LCD display with backlight STN. The resolution is 320×240. It can display 40
characters × 15 lines.
OP User Manual Page 6 of 100 LMAN011_R2V2
1-2 General specification
1. Electrical specification
Type Description
Input voltage DC20V～DC28V
Power consumption Less than 4W(TYP2.0W)
Momentary power-cut Less than 20ms
Voltage endurance AC1000V-10MA 1 minute (between signal and earth)
Insulation resistance DC500V- about 10MΩ(between signal and earth)
2. Environmental conditions
Type Description
Ambient operating
temperature 0～50, with no condensate
Storage temperature -20～60
Environment
temperature
20-85%, with no condensate
Vibration Resistance 10-25Hz (2G per 30min in X, Y, Z direction each)
Interfere immunity Voltage noise:1000Vp-p, pulse width 1μs,1 min
Ambient atmosphere With no corrosive air
Protect configuration Fit the IP65
OP User Manual Page 7 of 100 LMAN011_R2V2
1-3 Product types
Description
OP series OP320 OP320-S OP320-A OP320-A-S OP520
The number of
keys
7 20 42
Size of the
screen
3.7” 5.7”
The background
lamps
LED CCFL
The display
colour
Monochrome
Communication
port
RS232/
RS422
RS232/
RS485
RS232/
RS422
RS232/
RS485
RS232/RS422/
RS485
Shape and size 163.5W×101.7H×50.4
D
172W×94H×30D 284W×194H×50D
OP User Manual Page 8 of 100 LMAN011_R2V2
1-4 Name
1-4-1 OP320/OP320-S
The OP320(OP320-S), has the LCD display window, and 7 user buttons, The seven buttons
can be set to be special function keys, screen jump or on-off set and other functions.
Button Basic function(These keys are not used as function keys)
[ ] Normally sets the main menu or the screen which is used most often to
be the system’s initial screen.
[ ] When modifying the register’s data, shift the modified data bit to the left.
[ ] When modifying the register’s data, shift the modified data bit to the
right.
[ ] Previous page button or if in the status of data setting，the modified data
bit plus 1.
[ ] Next page button or if in the status of data setting，the modified data bit
plus -1.
OP User Manual Page 9 of 100 LMAN011_R2V2
[SET ] Press this key to start modifying a register’s value.
[ENT] Exit changing a registers value.
At the back of OP320 (OP320-S) there are power terminals, a communication socket and
contrast adjusting potentiometer.
OP320 display has backlight auto turn off if there is no operation for three minutes.
.
OP User Manual Page 10 of 100 LMAN011_R2V2
1-4-2 OP320-A/OP320-A-S
On the face of OP320-A (OP320-A-S), there is not only LCD display but also 20 buttons for
user special function. Refer to OP520 for detail button definition.
SET ENTALMESC
CL R+/ -0
321
654
987
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
