Lite-Puter EDX-B02D Bedienungsanleitung

EDX-B02D [EUM-B]

User Manual

EDX-B02D

2-Channel Curtain Controller

EDX-B02D [EUM-B]

INDEX

1. Introduction.................................................................................................................................................................. 2

1-1 Feature.............................................................................................................................................................. 2

1-2 Specification..................................................................................................................................................... 2

1-3 Dimension......................................................................................................................................................... 3

1-4 Panel Introduction........................................................................................................................................... 3

1-5 Wiring Diagram................................................................................................................................................ 4

2. Operation..................................................................................................................................................................... 5

2-1 Initialization....................................................................................................................................................... 5

2-2 DMX Address Setting..................................................................................................................................... 5

2-3 Motor Control................................................................................................................................................... 6

2-4 Accept/Refuse DMX Signal........................................................................................................................... 6

2-5 ID No. Setting................................................................................................................................................... 7

2-6 Zone Setting..................................................................................................................................................... 7

2-6-1 Single/Multi Zone Setting.................................................................................................................... 7

2-6-2 Single Zone Setting.............................................................................................................................. 7

2-6-3 Multi Zone Setting................................................................................................................................. 8

2-7 Scene Setting................................................................................................................................................... 8

2-8 Scene Save and Recall................................................................................................................................. 9

2-9 Scene Duration Setting.................................................................................................................................. 9

2-10 Motor Rotate Setting..................................................................................................................................10

2-11 Check Software Version............................................................................................................................10

LimitedWarranty...........................................................................................................................................................11

EDX-B02D [EUM-B]

1. Introduction

1-1 Feature

Standard DMX control. When the DMX value higher than 75%, curtain motor start

to rotate clockwise; when the DMX value lower than 25%, curtain motor start to

rotate counterclockwise; When the DMX value is in the range of 25％－75％, the

curtain motor stop rotating.

2 dry contacts output control the curtain motor rotate clockwise and

counterclockwise.

Accept ECP control panel.

Can save 6 scenes.

1-2 Specification

Power supply: AC 100-240V 50Hz-60Hz

Protocol: DMX-512/RS-485

Signal connector: 6P6C PHONE JACK(RJ11) *2, 4Pin green terminal

Installation: track-mounted

Dimension: 198 (W) x 90 (H) x 62 (D) mm

Weight: 650g

EDX-B02D [EUM-B]

1-3 Dimension

1-4 Panel Introduction

EDX-B02D [EUM-B]

Power supply：AC

100-240V

LED display

DMX: confirm button; FCN: function button; ▲▼◀▶direction

button

Power indicator

4、5、8

Signal input:

DMX-512/RS485

Communication indicator

Counterclockwise shortcut

button and indicator

clockwise shortcut button

and indicator

Control output

1-5 Wiring Diagram

AC Motor Wiring:

E N V F R N

EDX-B02D [EUM-B]

DC Motor Wiring:

E N V

F R G

2. Operation

2-1 Initialization

STEP-1: hold 【▲】and【▼】to power the device until LED displays:

STEP-2: Press【DMX】to initial:

STEP-3: then enter the main screen:

Press 【FCN】after STEP-2 can stop initialization.

2-2 DMX Address Setting

Standard DMX console can output 512 channels and EDX-B02D can use consecutive 2

channels out of them as the output channel. In these 2 channels, the first channel No. is start

channel address.

V +

EDX-B02D [EUM-B]

STEP-1: On the main page, press【DMX】+【▲】or【▼】to set the DMX address.

For example, change the DMX address from 001 to 003

When the DMX signal inputs, LED displays:

STEP-2: Release button to back.

2-3 Motor Control

On the main page , hold【▲】to start the motor rotate clockwise ; hold【▼】to start

the motor rotate counterclockwise; release【▲】or【▼】, the motor will stop rotating.

2-4 Accept/Refuse DMX Signal

STEP-1: On the main page, press【FCN】3 times to enter the screen:

STEP-2: Press【▲】or【▼】to select ON/OFF:

In which:

ON—— Refuse external DMX signal

OFF—— Accept external DMX signal

STEP-4: After setting, press【DMX】to save, press 【FCN】to exit.

EDX-B02D [EUM-B]

2-5 ID No. Setting

Each EDX series device must have a ID No..When one device is working alone, there is no

need to adjust the ID No., but when several devices are working together, each device must

have a different ID No.

STEP-1: On the main page, press【FCN】twice to enter ID NO. setting.

STEP-2: Press【▲】or【▼】to change ID NO.. (Up to 999)

STEP-3: After setting, press【DMX】to save, press 【FCN】to exit.

2-6 Zone Setting

Definition of zone: The device must set the Zone No. before using, which consists of two parts,

one is the zone no. and another is the start channel address.

2-6-1 Single/Multi Zone Setting

STEP-1：On the main page, press【FUNC】7 times to enter Zone setting.

STEP-2: Press 【▲】or【▼】to choose ON or OF

In which:

ON—Multi Zone state

OF—Single Zone state

STEP-3: After setting, press【DMX】to save, press 【FCN】to exit.

2-6-2 Single Zone Setting

STEP-1: On the main page, press【FCN】once to enter single zone setting. The cursor

will blink:

Blink

Blink, zone is 1

Blink, ID NO. is 1

EDX-B02D [EUM-B]

STEP-2: Press【▲】or【▼】to change the zone no. (Up to 99 Zones)

STEP-3: Press【◀】or【▶】to shift between zone and start channel option; press【◀】

to shift to startchannel option, and then press【▲】or【▼】can modify the zone

No. (Up to 99)

STEP-4: After setting, press【DMX】to save, press 【FCN】to exit.

2-6-3 Multi Zone Setting

STEP-1: On the main page, press【FCN】8 times to enter multi zone setting. Thecursor

will blink:

STEP-2: Press 【▲】or【▼】can modify channel;

STEP-3: Press 【◀】or【▶】to shift to zone select state. The cursor will blink:

STEP-4: Press 【▲】or【▼】can choose channel zone (Up to 99 Zones);

STEP-5: Press 【◀】or【▶】to shift to startchannel select. Thecursor will blink in the

start channel option:

STEP-6: Press 【▲】or【▼】can choose start channel (Up to 255)

STEP-7: After setting, press【DMX】to save, press 【FCN】to exit.

2-7 Scene Setting

STEP-1: On the main page, press【FCN】five times to enter channel edit status.

Blink, start channel is 1

Blink, channel is 1

Blink, zone is 1

Blink, start channel is 1

Blink, channel 1

EDX-B02D [EUM-B]

STEP-2: Press【▲】or【▼】to select channel

STEP-3: Press【◀】or【▶】to shift to LEVEL setting status of channel

STEP-4: Press【▲】or【▼】to modify LEVEL 0-FL of channel

2-8 Scene Save and Recall

STEP-1: According to 2-7, press 【DMX】to enter scene save screen:

STEP-2: Press【▲】 or【▼】to select the desired scene No., and save the current

channel status as any scene (SC1-6)

STEP-3: After setting, press【DMX】to save, press 【FCN】to exit.

2-9 Scene Duration Setting

STEP-1: On the main page, press【FCN】four times to enter Scene Duration Setting.

The cursor will blink:

STEP-2: Press【▲】 or【▼】to select scene No., and can select any scene (SC1-6)

STEP-3: Press【◀】or【▶】to shift to scene duration setting status:

STEP-4: Press【▲】 or【▼】to select scene duration(1-99s) or any one of infinity.

Blink, the current LEVEL is 50, the motor stops.

Blink, the current LEVEL is 75, the motor

rotates clockwise.

Blink, scene 1

Blink, scene duration scene is 10s

Inhaltsverzeichnis

Andere Lite-Puter Controller Handbücher

Lite-Puter

Lite-Puter ECP-103J Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung