Lithe Audio LWF2/IP Bedienungsanleitung
INSTRUCTION MANUAL
ALL-IN-ONE WI-FI
CEILING SPEAKER
THANK YOU FOR
CHOOSING LITHE AUDIO
Innovative design and advanced engineering are built in to our LWF series of wireless Wi-Fi ceiling
mount speakers. Designed for easy installation and high quality sound, within seconds each room is
setup and ready.This manual describes the installation of LWF series speakers within conventional
stud and sheetrock (Joist and plasterboard) ceilings.
1
IMPORTANT SAFETY WARNING
BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT
IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
Before commencing any electrical work ensure the supply is switched OFF at the mains. Either
by switching off the consumer unit or by removing the appropriate fuse.This product should
be installed in accordance with the relevant US National Electrical Code.
If the unit is to be used as a replacement for an existing product, remove the existing unit from its
location and disconnect the wiring. Connect the wires as shown in diagram. Ensure terminals are
ensure no wires are trapped.
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE
INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE
REFERENCE.
oFailure to follow the instructions in this guide voids all warranties on your speakers.
oWarning: Do not use the product in water.
oWarning: Do not install speaker directly above any heat sources such as radiators, or other
apparatus that produce heat.
oProtect the power cable from being damaged, do not over stretch cable.
oOnly use attachments/accessor
oTurn off the power to the speaker when unused for long periods of time.
oDo not open the back cover to the speaker as this protects the PCB as this will invalidate the
warranty and could cause electric shock.
oEnsure speaker location is free from obstructions such as electrical conduit, HVAC ducts or
Water lines.
Please ensure you read the entire instruction manual carefully before you commence any work.
Carefully unpack the speakers from the packaging. Please check to ensure all the parts shown
below are included.
If any parts of the speaker appear damaged, please contact your dealer/reseller immediately or
contact www.Litheaudio.com for contact details.
BOX CONTENTS
Listed below is the hardware equipment needed to install the speaker, with the addition of
a ladder to ensure the installation is done safely. A cutting template is included in the box.
PREPARATION EQUIPMENT YOU WILL NEED
WI-FI CEILING
SPEAKER
CUTTING GUIDE 5M SPEAKER CABLE
SCREWDRIVER
MEASURING TAPE
PENCIL
PROTECTIVE EYEWEAR
SPEAKER CABLE
POWER ADAPTOR
CUTTING SAW
DRILL
STUD FINDER
TAPE
WIRE CUTTERS
SPEAKER GRILLE
MODEL LWF1 OR LWF1/IP PAIR MODELS
ALSO INCLUDE
PASSIVE CEILING SPEAKER
LED COVER
3
KNOW YOUR SPEAKER
The Lithe Audio LWF range of Wi-Fi ceiling wireless speakers have various inputs and outputs:
SPEAKER OUTPUT - To connect one additional passive (Slave) speaker (Gold Plated)
RCA INPUTS - To connect directly from TV Output, CD Player, DVD Player etc..
POWER INPUT - To connect (as supplied) transformer
Power input 24V/2.5A
RCA-(Black)
R+ (Red) R- (Black)
RCA+(Red)
Speaker output
RCA Input
(SKPIKIEW]MRWXEPP½\MRKW
6.5” (165mm) Kevlar/Polyproplene cone
Titanium tweeter
&YMPXMR%QTPM½IV
& Wi-Fi chipset
Magnets for Cover (8)
Enviromental equalizer
(+/- 3db)
LED indicator
Connection Reset Button 95mm ceiling
depth required
210mm
hole
cutout
(template
supplied)
In built over voltage, under voltage, over temperature, and short circuit protection, if there is an electrical fault,
XLITS[IVWYTTP]XSXLIEQTPM½IV[MPPGYXSJJEYXSQEXMGEPP]ERHVIWXEVX[LIRXLIWTIEOIVLEWWXEFMPMWIH
4
INSTALLATION
IMPORTANT: BEFORE COMMENCING ANY ELECTRICAL WORK ENSURE
THE SUPPLY IS SWITCHED OFF AT THE MAINS. IF YOU ARE UNSURE HOW TO
FIT SEEK HELP FROM A PROFESSIONAL ELECTRICIAN / AV INSTALLER
1. Mark out the position of the speaker using a
tape measure and mark using a pencil with the
make sure no obstruction is present prior to
cutting.
3. Connect the power lead from the
transformer (supplied) to a circuit breaker.
Ensure the power lead is not overstretched.
2. Drill a pilot hole and cut the speaker hole
using a cutting saw. Take caution when
cutting to keep Àngers away from cutting
blade and wear protective eyewear.
4. Insert speaker into the ceiling then using a
the speaker in place, do not over tighten.
Attach the magnetic grille to the speaker front.
PAINTING THE SPEAKER GRILLE
Do not paint the speaker grilles whilst attached to the speaker. Lithe Audio reccomends spray
painting using 5 parts thinning agent to 1 part paint. Spray thinly to ensure speaker cover grille holes
are not blocked as this will effect the sound quality of the speakers.
INSTALLATIONS IN FIRE-RATED CEILINGS
speaker.Visit www.litheaudio.com for more information and reccomended hoods.
YOUR HOME WI-FI NETWORK
To enable the Lithe Audio Wi-Fi ceiling speakers, your device must be on the same network.
• Ensure your network has a high speed internet connection, as the speakers designed to
TVSZMHI]SY[MXLJVIISRPMRIWSJX[EVI½VQ[EVIYTHEXIW
• ,MKLWTIIH(70GEFPIQSHIQSV½FIVXSXLILSQIFVSEHFERHMWVIGSQQIRHIHJSVFIWX
possible playback of music services.
• Lithe Audio communicates over a 2.4GHz Wi-Fi home network supporting 802.11 b/g/n
wireless technology only.
• For larger homes where Wi-Fi signal is not stable, we suggest adding repeaters to strengthen
XLIRIX[SVOSVYTHEXMRK]SYVVSYXIVXSELMKLIVWTIGM½GEXMSRQSHIPXSWYMXXLIHIQERH
• For connections to computer or NAS drive for playing personal music library, we
recommend for best performance connecting via Ethernet cable.
LITHE AUDIO APP
• To enhance your listening experience download Lithe Audio app via the app store on your
device follow the setup procedures within this instruction manual.
• The app will allow you to setup singular rooms, groups of speakers or play in Party Mode.
• You can connect up to 30 speakers simultaneously and control them all from the app.
STATUS INDICATOR LIGHT
Located on the front face of the speaker, the LED Indicates the status of your speaker:
• Red solid: Speaker booting up
• 5HGTXLFN½DVKVWLPHVSpeaker under restart operation
• 5HGVORZ½DVKVWLPHSpeaker under standby mode, waiting for user operation
• Green solid: Speaker is active and connected to Wi-Fi
• *UHHQVORZ½DVKVWLPH7TIEOIVXV]MRKXSGSRRIGXXSXLITVIGSR½KYVIH;M*M
• Solid purple: Speaker under Aux mode
• *UHHQTXLFN½DVKVWLPHV7TIEOIVMR;%'7%'QSHIYWIVXSGSR½KYVI;M*M
• *UHHQ%OXHTXLFN½DVKVWLPHV;47QSHIYWIVXSGSR½KYVIXLI;M*M
6
7
SETUP FOR "QQMF JOS
Download the Lithe Audio App from the App Store.
2. Ensure the Wi-Fi speaker is connected to the power supply and is
XYVRIHSRXLI0)(MRHMGEXSV[MPP¾EWLVIHWPS[P]
Press and hold the ‘Connection Reset Button’ for 5 seconds &
VIPIEWIXLI0)(MRHMGEXSV[MPP¾EWL+VIIRERHXLIWTIEOIVMWRS[
ready to connect to your Wi-Fi network.
Open the Wi-Fi setting menu on
your phone or tablet
5. Select the new "JS1MBZ speaker listed you
would like to add to your network
6. Select your network and change the
‘Speaker Name’ to something easily
MHIRXM½EFPIIK/MXGLIRERHGPMGO2I\X
4. The Lithe Audio Wi-Fi speaker
setup is now complete, return to
the Lithe Audio app
Image shows Apple iPhone but visuals may change from device to device.
Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
OPEN CAMERA & SCAN TO
DOWNLOAD THE APP
1. Swipe from the bottom of the
screen upwards to access menu
2. Click on the right corner icon
to show available AirPlay devices
PLAY VIA iOS AirPlay
To play directly to 1x speaker using a iOS devices (iPad, iMac, iPhone, Apple TV etc) you can
connect via AirPlay. Please follow the steps below:
ENSURE THE WI-FI SPEAKER IS CONNECTED TO THE POWER SUPPLY,
AND THE WIFI NETWORK.
For various iOS devices the process of connecting via AirPlay is different, example using a
iPhone is shown below:
3. Audio display screen shall show
available devices to play music
through as per list
4. Select the speaker to play music
through and press play on your source
player
5. 'LSSWI±0%'SR½KYVIC<<<<²JVSQ
the list of Wi-Fi networks
7. Return back to the Lithe Audio app to
continue the setup process.
9
SETUP FOR ANDROID
Download the Lithe Audio App from thhe Google Play store
2. Ensure the Wi-Fi speaker is connected to the power supply and is
XYVRIHSRXLI0)(MRHMGEXSV[MPP¾EWLVIHWPS[P]
Press and hold the ‘Connection Reset Button’ for 5 seconds &
VIPIEWIXLI0)(MRHMGEXSV[MPP¾EWL+VIIRERHXLIWTIEOIVMWRS[
ready to connect to your Wi-Fi network.
OPEN CAMERA & SCAN TO
DOWNLOAD THE APP
3TIRXLI;M½WIXXMRKQIRYSR]SYV
phone or tablet
6. )RWYVI±0%'SR½KYVIC<<<<²
is connected with a tick
Inhaltsverzeichnis
Andere Lithe Audio Sprecher Handbücher
Lithe Audio
Lithe Audio LBT2 Bedienungsanleitung
Lithe Audio
Lithe Audio LWF1V2 Bedienungsanleitung
Lithe Audio
Lithe Audio LHS300 Bedienungsanleitung
Lithe Audio
Lithe Audio LWF1V2 Bedienungsanleitung
Lithe Audio
Lithe Audio LWF1 Bedienungsanleitung
Lithe Audio
Lithe Audio LBT2 Bedienungsanleitung
Lithe Audio
Lithe Audio LBT2 Bedienungsanleitung
Lithe Audio
Lithe Audio Garden Rock Bedienungsanleitung
Lithe Audio
Lithe Audio iO1 Series Bedienungsanleitung
Lithe Audio
Lithe Audio PRO Series Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung