Little Wonder PRO VAC SP Bedienungsanleitung

LITTLE WONDER

Parts Manual 4171084

OPERATORS MANUAL

PRO VAC SP

MODELS:

5612-12-59 HONDA GX270

MAN 4171085

Rev A. 07-2014

Original Language Instructions

CALIFORNIA

Proposition 65 Warning

Diesel engine exhaust and some

of its constituents are known to the

State of California to cause cancer,

birth defects and other reproductive

harm.

WARNING

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

CALIFORNIA

Proposition 65 Warning

Battery posts, terminals, wiring

insulation, and related accessories

contain lead and lead compounds,

chemicals known to the State of

California to cause cancer and birth

defects or other reproductive harm.

WASH HANDS AFTER HANDLING.

PRO VAC SP

07-2014

TABLE OF CONTENTS FIGURES PAGE

SAFETY.........................................................................................................................................................4-8

LABELS............................................................................................................................................................9

CONTROLS....................................................................................................................................................10

OPERATION ............................................................................................................................................. 11-12

STORAGE ......................................................................................................................................................13

TROUBLESHOOTING ...................................................................................................................................14

DECLARATION OF CONFORMITY ............................................................................................................... 15

WARRANTY ............................................................................................................................... BACK COVER

This Operator Manual is part of the machine. Suppliers of both new and second-

hand machines must make sure that this manual is provided with the machine.

IMPORTANT MESSAGE

Thank you for purchasing this Schiller Grounds Care, Inc. product. You have purchased a world class product, one of the best designed and

built anywhere.

This machine comes with an Operation and Safety Manual, Parts and Service Manual, and Engine Manual. The useful life and good service you

receive from this machine depends to a large extent on how well you read and understand these manuals. Treat your machine properly, lubricate

and adjust it as instructed, and it will give you many years of reliable service.

Your safe use of this Schiller Grounds Care, Inc. product is one of our prime design objectives. Many safety features are built in, but we also rely

on your good sense and care to achieve accident-free operation. For best protection, study the manuals thoroughly. Learn the proper operation

of all controls. Observe all safety precautions. Follow all instructions and warnings completely. Do not remove or defeat any safety features.

Make sure those who operate this machine are as well informed and careful in its use as you are.

See a Schiller Grounds Care, Inc. dealer for any service or parts needed. Schiller Grounds Care, Inc. service ensures that you continue to receive

the best results possible from Schiller Grounds Care, Inc. products. You can trust Schiller Grounds Care, Inc. replacement parts because they

are manufactured with the same high precision and quality as the original parts.

Schiller Grounds Care, Inc. designs and builds its equipment to serve many years in a safe and productive manner. For longest life, use this

machine only as directed in the manuals, keep it in good repair and follow safety warnings and instructions. You’ll always be glad you did.

Schiller Grounds Care, Inc.

1028 Street Road

Southampton, PA 18966-4217

PHONE 877-596-6337 • FAX 215-357-8045

PRO VAC SP

MODEL NUMBER: This number appears on

sales literature, technical manuals and price lists

and serial tag.

SERIAL NUMBER: This number appears only

on your unit. It contains the model number fol-

lowed consecutively by the serial number. Use

this number when ordering parts or seeking war-

ranty information.

SAFETY

NOTICE !!!

Unauthorized modications may present extreme

safety hazards to operators and bystanders and

could also result in product damage.

Schiller Grounds Care, Inc. strongly warns against,

rejects and disclaims any modications, add-on

accessories or product alterations that are not

designed, developed, tested and approved by Schiller

Grounds Care, Inc. Engineering Department. Any

Schiller Grounds Care, Inc. product that is altered,

modied or changed in any manner not specically

authorized after original manufacture-including the

addition of “after-market” accessories or component

parts not specically approved by Schiller Grounds

Care, Inc. will result in the Schiller Grounds Care,

Inc. Warranty being voided.

Any and all liability for personal injury and/or

property damage caused by any unauthorized

modications, add-on accessories or products not

approved by Schiller Grounds Care, Inc. will be

considered the responsibility of the individual(s) or

company designing and/or making such changes.

Schiller Grounds Care, Inc. will vigorously pursue

full indemnification and costs from any party

responsible for such unauthorized post-manufacture

modications and/or accessories should personal

injury and/or property damage result.

This symbol means:

ATTENTION!

BECOME ALERT!

Your safety and the safety of others is involved.

Signal word denitions:

The signal words below are used to identify levels

of hazard seriousness. These words appear in this

manual and on the safety labels attached to Schiller

Grounds Care, Inc. machines. For your safety and

the safety of others, read and follow the information

given with these signal words and/or the symbol

shown above.

DANGER indicates an imminently hazardous

situation which, if not avoided, WILL result in death

or serious injury.

WARNING indicates a potentially hazardous

situation which, if not avoided, COULD result in

death or serious injury.

CAUTION indicates a potentially hazardous situation

which, if not avoided, MAY result in minor or moderate

injury. It may also be used to alert against unsafe

practices or property damage.

CAUTION used without the safety alert symbol

indicates a potentially hazardous situation which, if

not avoided, MAY result in property damage.

PRO VAC SP SAFETY

SITE PREPARATION AND CIRCUMSTANCES

• Evaluate the terrain to determine how to safely

perform the job. Only use accessories and

attachments approved by the manufacturer.

• Be sure the area is clear of pets and people,

especially young children. Never assume they will

remain where you last saw them. Stop the machine

if any enter the area.

• Only vacuum in daylight or in good articial light.

• Keep in mind that the operator or user is respon-

sible for accidents or hazards occurring to other

people or their property.

OPERATOR PREPARATION AND

TRAINING

READ THE OPERATION &

SAFETY MANUAL

• If an operator or mechanic

cannot read English, it is

the owner’s responsibility

to explain this material to them. If any portion

of this material is unclear, contact your factory

representative for clarication.

• Become familiar with the safe operation of the

equipment, operator controls and safety signs.

Be prepared to stop the engine quickly in an

emergency. Do not operate or allow another

person to operate this machine if there are any

questions about safety.

• All operators and mechanics should be trained. The

owner is responsible for training the users.

• Wear appropriate clothing, including safety goggles

or safety glasses with side shields when operating.

Wear substantial footwear and long pants. Do not

operate barefoot or wearing open sandals. Long

hair, loose clothing or jewelry may get tangled in

moving parts.

• Wear appropriate hearing protection.

• Wear safety glasses.

• Wear a dust mask to avoid breathing dust.

• Never allow children, unskilled or improperly trained

people to operate this equipment. Local regulations

can restrict the age of the operator.

• Never pick up or carry the unit while the engine is

running.

• Keep warning labels and this operator’s manual

legible and intact. Replacement labels and manuals

are available from the factory.

• Do not operate machine while under the inuence

of drugs or alcohol, or any other condition of

impairment.

• The owner/user can prevent and is responsible for

accidents or injuries occurring to themselves, other

people, or property.

MULTIPLE OPERATORS

• Keep a safe distance between operators when

working together.

MACHINE PREPARATION

• Read engine manual.

• Check operator presence interlock system. Adjust

or have any problems repaired before using.

• Damage to the engine can occur if there is no oil or

oil level is low. Check the oil level and add oil per

engine manual as necessary.

• Do not tamper with or defeat safety devices. Keep

guards, shields and interlock safety devices in place

and in proper working condition. They are for your

protection.

• Keep all fasteners such as nuts, bolts, and pins well

secured.

• Verify that machine and attachments, if any, are in

good operating condition.

PRO VAC SP

OPERATING SAFELY

IN GENERAL

• Use extra care when loading or unloading the machine

into a trailer or truck.

• Use caution when making turns and crossing roads

and sidewalks.

• Never operate without guards, plates, or other safety

protective devices in place.

• Do not run the engine in an enclosed area where

dangerous carbon monoxide fumes can collect.

• Never leave a machine unattended. Turn off fan and

stop engine before leaving the machine.

• Keep hands away from the vac air intake and outlet.

• Stop operation if someone approaches.

STARTING

• Start according to instructions in this manual or on the

machine.

• Do not change engine governor settings or overspeed

the engine. Operating the engine at excessive speed

can increase the hazard of personal injury.

SAFETY

INTERRUPTING OPERATION

Before leaving the operator’s position:

-Park on level ground.

-Shut off the engine and remove the key

• Stop the engine and wait until the fan stops rotating:

- before refueling .

• Stop the engine and disconnect the spark plug wire:

- before clearing blockages or unclogging;

- before checking, cleaning or working on the

machine;

- if the machine begins to vibrate abnormally: shut

off machine immediately. Inspect and have repairs

made as needed before restarting;

- except for repairs or adjustments as specically

noted, such as for carburetor adjustment, where the

engine must be running. Keep hands and feet clear

of moving parts in these circumstances.

• Allow the fan to come to a complete stop when

stopping operation to clear blockages, unclog, inspect

the machine, do maintenance or repair.

• Reduce the throttle setting during engine shutdown

and, if the engine is provided with a shutoff valve, turn

the fuel off at the conclusion of mowing.

PRO VAC SP SAFETY

OPERATING ON SLOPES

USE EXTRA CARE WHEN OPERATING ON

SLOPES. EVALUATE THE RISKS INVOLVED BEFORE

OPERATING ON A SLOPE

• Slopes are a major factor in loss of control and tip

over accidents that sometimes lead to sever injury or

death. All slopes require extra caution.

• Do not operate on slopes if uneasy or uncertain about

the machine stability. Ultimate responsibility for safe

operation on slopes rests with the operator.

• Be sure of your footing on slopes.

• With walk-behind machines, operate across slopes,

not up and down.

• Avoid starting or stopping on a slope. If wheels lose

traction, disengage the blades and proceed straight

down the slope.

• Use lower speeds and exercise caution on slopes.

• Avoid sharp turns to prevent tipping and loss of control.

Use extra caution when changing direction on slopes.

• Walk, never run.

• Be alert to dips and rises which change the general

slope. Watch for holes, rocks, roots, and other hidden

objects in the terrain. Keep away from dropoffs. Avoid

ground conditions which will cause the machine to

slide..

MAINTENANCE SAFETY

In general

• Maintain machine according to manufacturer's

schedule and instructions for maximum safety and

best results.

• Park machine on level ground.

• Never allow untrained personnel to service

machine.

• Guards should only be removed by a qualied

technician for maintenance or service. Replace

when work is completed.

• Adjust or repair only after the engine has been

stopped and the blade has stopped moving.

• Disconnect spark plug wire(s) before doing any

maintenance.

• Replace parts if worn, damaged or faulty. For best

results, always replace with parts recommended by

the manufacturer.

• Do not dismantle the machine without releasing or

restraining forces which may cause parts to move

suddenly.

• Provide adequate support, e.g. jack stands for lifted

machine or parts if working beneath.

• Do not put hands or feet near or under rotating

parts.

• Clean up spilled oil or fuel thoroughly.

• Replace faulty mufers.

• To reduce re hazards, keep the engine, mufer,

and fuel storage area free of grass, leaves, debris

buildup or grease.

• Never attempt to make adjustments while the

engine is running except for repairs or adjustments

as specically noted, such as for carburetor

adjustment, where the engine must be running.

Keep hands and feet clear of moving parts in these

circumstances.

PRO VAC SP

STORAGE SAFETY

• Stop the engine and allow to cool before storing.

• Drain the fuel tank outdoors only.

• Store fuel in an approved container in a cool, dry place.

• Keep the machine and fuel containers in a locked stor-

age place to prevent tampering and to keep children

from playing with them.

• Do not store the fuel container or equipment with

gasoline in the tank inside a building where fumes

may reach an open ame or spark.

• Appliances such as furnaces and water heaters

with a pilot light have an open ame.

• Keep petrol (gasoline) storage area free of grass,

leaves and excessive grease to reduce re hazard.

• Clean grass and debris from cutting units, drives,

mufers and engine to help prevent res.

• Clean up any spilled gasoline or oil in the storage

area.

Fuel

• Petrol (gasoline) is ammable;

petrol (gasoline) vapors are

explosive. Use extra care when

handling.

• Store only in containers speci-

cally designed for fuel.

• When refueling or checking fuel level:

- Stop the engine and allow to cool;

- Do not smoke;

- Refuel outdoors only;

- Use a funnel;

- Do not overll;

- If fuel is spilled, do not attempt to start the engine

until the spill is cleaned up and vapors have

cleared.

- Replace caps on fuel containers and tanks se-

curely.

Sparks from static electricity can start res or cause

explosions. Flowing fuel can generate static electricity.

To prevent static electricity sparks:

• Keep containers electrically grounded. Do not ll

containers in a vehicle or on a truck or trailer bed

with a plastic liner. Fill containers on the ground

away from the vehicle.

• When practical, remove petrol (gasoline) powered

equipment from the truck or trailer and refuel it on

the ground. If equipment must be refueled on the

truck or trailer, refuel from a portable container

rather than a dispenser nozzle.

• Keep the dispenser nozzle in contact with the rim

of the fuel tank or container opening until fueling is

complete. Do not use a nozzle lock-open device.

• If fuel is spilled on clothing change it immediately.

WARNING

SAFETY

WARNING

Fans

Do not straighten or weld fans.

Replace damaged or failed fans.

PRO VAC SP

WARNING LABELS

Warning labels are an important part of the safety system incorporated in this machine.

Replace labels if damaged or illegible.

LABELS

Maintenance

Before performing any

service or maintenance,

disconnect spark plug wire.

Make sure engine switch if

in the OFF (O) position.

Rotating Parts

- Caution

Contact with rotating fan will cause

serious injury. Keep hands away from

air intake and discharge areas.

Operaton & Safety

Manual

- Read and understand

Operation & Safety

Manual.

- Replace if lost or

damaged.

Attention!

- Wear hearing protection.

- Wear eye protection.

Thrown objects

- Keep area clear of people and pets.

- Do not blow towards people or items that may

be injured or damaged by ying debris.

4171002

Rotating Parts

- Caution

Contact with rotating fac will cause

serious injury. Keep hands away from

air intake and discharge areas.

Vacuuming

Push the rear bail towards the

handle to move forward.

Pull the front bail back toward

handle to move in reverse.

4171006

4168759

Rotating Parts

-Cut/Crush/Entanglement hazard.

-Keep hands away from moving part

-Stop engine before servicing.

-Do not operate with cover removed.

910649

LOCK OUT MECHANISM

PRO VAC SP

CONTROLS

THROTTLE (A)

Controls engine speed and vacuum suction level.

CHOKE (B)

Move to the “CHOKE” position to apply the choke.

Move to the “RUN” position to remove the choke.

FUEL SHUT OFF (C)

Move to the “OFF” position to shut off the fuel

whenever transporting the machine by trailer or truck

or during storage. Move to the “ON” position before

starting the engine. The “OFF” position also can

be used to “KILL” the engine as a “KILL” switch is

combined with the fuel shutoff.

ADJUSTING KNOB (D)

Adjusts nozzle height.

RECOIL STARTER HANDLE (E)

Pull to turn over the engine to start it. Guide the

recoil starter handle back to the rope guide for best

rope life. Allowing the rope to snap back will shorten

rope life.

ENGINE SWITCH (F)

Move to the “OFF” position to stop the engine. Move

to the “ON” position before starting engine.

FREE WHEEL ROD (G)

Pull the free-wheel rod until the enlarged boss comes

through the keyhole on the free-wheel bracket, then

slide the rod down the slot to latch it to free wheel or

push the machine without the engine running. Raise

the rod until the enlarged boss pops back behind the

bracket to engage the transmission.

BAIL (H)

Push the bail towards the handle to move the

vacuum forward. Pull the bail back to move in

reverse.

Andere Handbücher für PRO VAC SP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Little Wonder Gebläse Handbücher

Little Wonder

Little Wonder MAXIMUM OUTPUT BLOWER Original Bedienungsanleitung

Little Wonder

Little Wonder LB601-00-59 Original Bedienungsanleitung

Little Wonder

Little Wonder MAN 4163480 Original Bedienungsanleitung

Little Wonder

Little Wonder OPTIMAX 9131-00-01 Bedienungsanleitung

Little Wonder

Little Wonder SHO 9502-00-01 Bedienungsanleitung

Little Wonder

Little Wonder OPTIMAX 9270-02-01 Bedienungsanleitung

Little Wonder

Little Wonder Optimax 9270-02-59 Handbuch

Little Wonder

Little Wonder Optimax 9270-12-59 Original Bedienungsanleitung

Little Wonder

Little Wonder Optimax 9270-02-59 Original Bedienungsanleitung

Little Wonder

Little Wonder OPTIMAX 9160-02-01 Bedienungsanleitung

Little Wonder

Little Wonder Optimax LB800 Original Bedienungsanleitung

Little Wonder

Little Wonder 9005S Datenblatt

Little Wonder

Little Wonder Optimax 9270-12-01 Programmierhandbuch

Little Wonder

Little Wonder OPTIMAX LB1401-00-01 Bedienungsanleitung

Little Wonder

Little Wonder OPTIMAX 9270-03-01 Produkthandbuch

Little Wonder

Little Wonder High Output Blower Original Bedienungsanleitung

Little Wonder

Little Wonder SHO 9502-00-01 Original Bedienungsanleitung

Little Wonder

Little Wonder Sho Original Bedienungsanleitung

Little Wonder

Little Wonder Optimax 9270-12-59 Original Bedienungsanleitung

Little Wonder

Little Wonder OPTIMAX LB900-00-01 Bedienungsanleitung

Little Wonder

Little Wonder 9600, 9810, 9900, 9100, 9130 Original Bedienungsanleitung

Little Wonder

Little Wonder Optimax 9390-06-01 Original Bedienungsanleitung

Little Wonder

Little Wonder PRO VAC Bedienungsanleitung

Little Wonder

Little Wonder Surburban High Output Blower Original Bedienungsanleitung

Beliebte Gebläse Handbücher anderer Marken

Weed Eater

Weed Eater VS2000BV Bedienungsanleitung

KRAUSMANN

KRAUSMANN U37020-00 Bedienungsanleitung

Cub Cadet

Cub Cadet HB425 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro BLB482 Bedienungsanleitung

ARIETE

ARIETE 2768 Bedienungsanleitung

NuTone

NuTone 331H Bedienungsanleitung

GÜDE

GÜDE GLB 200 18 Li-Ion Bedienungsanleitung

I.VA.CO.

I.VA.CO. SC Series Betriebsanleitung

DeWalt

DeWalt DCE100 Bedienungsanleitung

Becker

Becker SV 7.330 Bedienungsanleitung

Metabo

Metabo AG 18 Pro Bedienungsanleitung

Desa

Desa GA3650TB Bedienungsanleitung

Echo

Echo Power Blower PB-230LN Bedienungsanleitung

Echo

Echo PB-413H Bedienungsanleitung

Black & Decker

Black & Decker BV3100 Bedienungsanleitung

Ryobi

Ryobi RY08570 Bedienungsanleitung

Haaga

Haaga 355 Bedienungsanleitung

Stiga

Stiga SBL 327 V Bedienungsanleitung