5
BRUSH CUTTER SAFETY
• Clear the area to be cut of objects such as rocks,
toys, wire or any other debris that may be thrown or
get tangled in the brush cutter.
• Be sure the area is clear of pets and people,
especially young children. Never assume they will
remain where you last saw them. Stop the machine
if any enter the area.
• Only cut in daylight or in good articial light.
• Keep in mind that the operator or user is respon-
sible for accidents or hazards occurring to other
people or their property.
• Do not cut wet grass as tires may lose traction.
OPERATOR PREPARATION AND
TRAINING
READ THE OPERATION &
SAFETY MANUAL
• If an operator or mechanic
cannot read English, it is
the owner's responsibility
to explain this material to them. If any portion
of this material is unclear, contact your factory
representative for clarication.
• Become familiar with the safe operation of the
equipment, operator controls and safety signs.
Be prepared to stop the engine quickly in an
emergency. Do not operate or allow another
person to operate this machine if there are any
questions about safety.
• All operators and mechanics should be trained. The
owner is responsible for training the users.
• Wear appropriate clothing, including safety goggles
or safety glasses with side shields when operating.
Wear substantial footwear and long pants. Do not
operate barefoot or wearing open sandals. Long
hair, loose clothing or jewelry may get tangled in
moving parts.
• Wear appropriate hearing protection.
• Wear safety glasses.
• Never allow children, unskilled or improperly trained
people to operate this equipment. Local regulations
can restrict the age of the operator.
• Do not put hands or feet near or under rotating
parts. Keep clear of the front deck opening at all
times.
• Never pick up or carry the unit while the engine is
running.
• Keep warning labels and this operator’s manual
legible and intact. Replacement labels and manuals
are available from the factory.
• Do not operate machine while under the inuence
of drugs or alcohol, or any other condition of
impairment.
• The owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people, or property.
SITE PREPARATION AND CIRCUMSTANCES
• Evaluate the terrain to determine how to safely
perform the job. Only use accessories and
attachments approved by the manufacturer.
MULTIPLE OPERATORS
• Keep a safe distance between operators when
working together.
MACHINE PREPARATION
• Read engine manual.
• Check operator presence interlock system. Adjust
or have any problems repaired before using.
• Damage to the engine can occur if there is no oil or
oil level is low. Check the oil level and add oil per
engine manual as necessary.
• Do not tamper with or defeat safety devices. Keep
guards, shields and interlock safety devices in place
and in proper working condition. They are for your
protection.
• Keep all fasteners such as nuts, bolts, and pins well
secured.
• Visually inspect blades, blade bolts and the cutter
assembly for wear or damage. Replace worn or
damaged blades and bolts to preserve balance.
• Verify that machine and attachments, if any, are in
good operating condition.
• Do not engage blades until ready to mow.
