Little Wonder 5601 Bedienungsanleitung

ASPIRADORA DE ALTO RENDIMIENTO

ASPIRATEUR HAUTE PERFORMANCE

Models 5601 and 5611

Modèles 5601 et 5611

Modelos 5601 y 5611

Table of Contents Important Information

A. Introduction

On behalf of everyone at

Little Wonder

, we would like to

thank you for your purchase of a

Little Wonder

High

Performance Vac. This professional debris handling machine

was designed to the highest standards to ensure you many

hours of uninterrupted service.

This manual provides the information necessary for safe and

efficient operation and service. For your safety, it is critically

important that you read and understand this entire manual

before operating your High Performance Vac.

Specifications:

Model Dry Weight Max Rpm

5601 182 lbs. 3400

5611 184 lbs. 3400

B. Service Information

High Performance Vac Unit

Contact your local

Little Wonder

dealer.

Engine

Contact an authorized Briggs & Stratton dealer. Dealers are

listed in the Yellow Pages under “Lawn and Garden Equipment

Supplies”, “Lawn Maintenance” or “Lawn Mowers”. Your

dealer will need to know the model and serial number of your

engine. For their location, please consult the operator’s manual

provided with your engine.

C. Special Safety Information

WARNING DANGER

ATTENTION: THIS SYMBOL POINTS OUT

IMPORTANT SAFETY INSTRUCTIONS

WHEN YOU SEE THIS SYMBOL

HEED ITS WARNING! STAY ALERT!

WARNING DANGER

TO REDUCE THE POTENTIAL FOR ACCIDENTS,

COMPLY WITH THE SAFETY INSTRUCTIONS IN

THIS MANUAL. FAILURE TO COMPLY MAY RESULT

IN SERIOUS PERSONAL INJURY AND OR

EQUIPMENT AND PROPERTY DAMAGE.

WARNING DANGER

THE ENGINE EXHAUST FROM THIS PRODUCT

CONTAINS CHEMICALS KNOWN TO THE STATE OF

CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS

OR OTHER REPRODUCTIVE HARM.

Important Information

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Service Information . . . . . . . . . . . . . . . . . . . . .1

Special Safety Information . . . . . . . . . . . . . . . .1

Unpackaging

Unpackaging Information . . . . . . . . . . . . . . . . .2

Safety and Warnings

Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . .2-3

General Safety Rules

Warnings - "Don’ts" . . . . . . . . . . . . . . . . . . . . .4

Warnings - "Do’s" . . . . . . . . . . . . . . . . . . . . .4-5

Engine/ Fuel Warnings - "Don’ts" . . . . . . . . . .5

Engine/ Fuel Warnings - "Do’s" . . . . . . . . . . . .5

Assembly Instructions

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Put Oil and Gasoline in Engine

Before Starting . . . . . . . . . . . . . . . . . . . . . . . . .7

Use of Lifting Lug . . . . . . . . . . . . . . . . . . . . . .7

Operation

Start Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Empty Debris Bag . . . . . . . . . . . . . . . . . . . . . . .7

Refueling the Engine . . . . . . . . . . . . . . . . . . . .7

Storage and Maintenance

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Removing Blockage in Moving Parts . . . . . . . .9

Removing the Fan . . . . . . . . . . . . . . . . . . . . . . .9

Part Numbers

HPV Assembly Part Numbers . . . . . . . . . . . .10

HPV Subassembly Part Numbers . . . . . . .11-12

Warranties

Warranty . . . . . . . . . . . . . . . . . . . . . .Back cover

Unpacking

1. Remove Collector assembly, Nozzle assembly, and

Debris bag from the top section of the package.

2. Remove cardboard insert.

3. Cut away short side of box and fold down.

4. Roll HPV base unit out of box.

P/N 600602

Warning Label

P/N 600605

Warning Label

Caution:

Thrown

objects.

Keep

bystanders

away.

Always wear

eye, ear and

breathing

protection.

Before

performing

any service or

maintenance,

disconnect spark

plug wire. Make

sure throttle is in

STOP position.

Read and

understand the

Owners Manual.

Store your

Owners Manual

in a safe place.

Keep hands and

feet away from

air discharge

areas. Rotating

fan will cause

serious injury.

Safety and Warnings

A. Safety Decals

An important part of the safety system incorporated in this

High Performance Vac are the warnings and informational

decals (labels) found on various parts of the unit.

These decals (labels) must be replaced if they become illegible

due to abrasion, etc.

It is your responsibility to replace the decals (labels) when they

become hard to read. The location of these decals and their

part numbers for ordering are shown on page 3.

WARNING DANGER

IMPROPER USE OR CARE OF THIS HIGH

PERFORMANCE VAC, OR FAILURE TO WEAR PROPER

PROTECTION CAN RESULT IN SERIOUS INJURY.

READ AND UNDERSTAND THE RULES FOR

SAFE OPERATION AND ALL INSTRUCTIONS

IN THIS MANUAL.

WEAR HEARING, EYE, AND BREATHING

PROTECTION.

P/N 600604

Safety and Warnings

P/N 600602

Warning Label

P/N 600605

Warning Label

General Safety Rules

1. Read and understand manual.

2. Wear eye, hearing, and breathing protection, proper

clothing and footwear.

3. While operating the machine always be sure of a safe and

secure operating position, maintain a firm footing and

good balance at all times.

4. Keep area clear of children, pets and bystanders.

5. Never attempt to use an incomplete machine or one fitted

with an unauthorized modification.

6. Avoid contact with and inhalation of harmful fluids, gases,

mists, fumes, and dust.

7. Do not allow children to operate machine.

8. Do not override or remove any safety devices.

12. Keep hands away from hose inlet and discharge chute.

13. Disconnect spark plug before doing any cleaning or

maintenance.

14. Wear gloves to protect your hands.

15. Beware that the machine is loud and, during normal

operation; may interfere with speech communication.

A. Warnings - "Don’ts"

Don’t attempt to remove materials from intake or discharge

when High Performance Vac is running, or fan is rotating.

Don’t install or remove components while High Performance

Vac is running. Turn off engine to make changeover. Be sure

throttle is in the stop position, and the High Performance Vac

has come to a complete stop. Remove the spark plug wire

from the spark plug before removing material.

Don’t attempt to repair High Performance Vac. Have repairs

made by qualified Little Wonder dealer or repairman. See that

only Little Wonder and recommended engine manufacturers

replacement parts are used.

Don’t leave the engine running while the High Performance

Vac is unattended.

Don’t store, spill, or use gasoline near flames or spark

B. Warnings - "Do’s"

Always dress properly. Do not wear loose clothing or jewelry.

They can be caught in moving parts. Use of sturdy gloves,

non-skid footwear and safety glasses are recommended.

Always wear ear protectors where possible. Use face filter to

avoid breathing dust.

Always stay alert. Watch what you are doing and use common

sense. Do not operate High Performance Vac when fatigued.

Always keep hands away from air intake and air outlet chute.

Keep both hands on handles when power is on.

Always maintain and examine High Performance Vac with

care. Follow maintenance instructions given in manual.

WARNING DANGER

9. FAN COASTS AFTER THE ENGINE IS TURNED OFF.

WARNING DANGER

DO NOT SMOKE WHEN FILLING FUEL TANK

WARNING DANGER

10. ROTATING FAN. DON’T ATTEMPT TO REMOVE

MATERIALS FROM INTAKE OR DISCHARGE WHEN

UNIT IS RUNNING, OR FAN IS ROTATING.

WARNING DANGER

DO NOT USE THE HIGH PERFORMANCE VAC IF THE

MUFFLER IS DEFECTIVE OR MISSING.

WARNING DANGER

11. DO NOT OPERATE UNIT IF EXCESSIVE VIBRATION

OCCURS; SHUT ENGINE OFF IMMEDIATELY!

REMOVE SPARK PLUG WIRES AND CHECK FOR

DAMAGED IMPELLER, LOOSE IMPELLER BOLT,

LOOSE IMPELLER KEY, OR LODGED

FOREIGN OBJECTS.

WARNING DANGER

IF THE HIGH PERFORMANCE VAC IS USED

IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT

FOLLOWED, THE USER RISKS SERIOUS INJURY TO

THEMSELVES AND OTHERS.

READ AND UNDERSTAND THE FOLLOWING

BEFORE ATTEMPTING TO OPERATE THIS

HIGH PERFORMANCE VAC.

WARNING DANGER

HANDLE FUEL WITH CARE. IT IS HIGHLY

FLAMMABLE. FUELING A HOT ENGINE OR NEAR

AN IGNITION SOURCE CAN CAUSE A FIRE AND

RESULT IN SERIOUS PERSONAL INJURY AND/ OR

PROPERTY DAMAGE.

D. Engine/ Fuel Warnings - "Do’s"

Always use fresh gasoline. Stale gasoline can cause

leakage.

Always pull starter cord slowly until resistance is felt.

Then pull cord rapidly to avoid kickback and prevent

arm or hand injury.

The use of spark arrestor mufflers is required by law in

the state of California (Section 4442 of the California

Public Resources Code), as well as in other states or

municipalities. Federal laws apply on federal lands.

Always handle fuel with care; it is highly flammable.

Never add fuel to a machine with a running or hot

engine. Do not inhale fuel fumes as they are toxic.

The spark ignition system meets all requirements of

the Canadian Interference Causing Equipment

Regulations.

monoxide and other gasses are emitted.

Don’t run engine when electrical system causes spark

outside the cylinder. During periodical checks of the

spark plug, keep plug a safe distance from cylinder to

avoid burning of evaporated fuel from cylinder.

Don’t check for spark with spark plug or plug wire

removed and grounded. Use an approved tester. Sparks

can ignite fumes.

Don’t run engine when the odor of gasoline is present

or other explosive conditions exist.

Don’t operate the unit if gasoline is spilled. Clean up

spill completely before starting engine.

Don’t refuel indoors or in an improperly ventilated

area.

Don’t operate your High Performance Vac if there is

an accumulation of debris around the muffler and

cooling fins.

Don’t touch hot mufflers, cylinders or cooling fins as

contact may cause serious burns.

B. Warnings - "Do’s" Continued

Always store High Performance Vac indoors. When not in use,

store High Performance Vac indoors in a sheltered area

(a dry place) where it’s not accessible to children. The High

Performance Vac, as well as fuel, should not be stored in a

house. Keep throttle in the stop position.

Always be sure High Performance Vac is fully assembled.

Never operate High Performance Vac without all guards and

deflectors in place. Ensure that all nuts, bolts, screws are

installed and properly tightened.

Always keep the throttle in the “stop” position when not in use.

Always keep a safe distance between two or more operators

when working together simultaneously.

C. Engine/ Fuel Warnings - "Don’ts"

Don’t fuel, refuel or check fuel while smoking or near

an open flame or other ignition source. Stop engine and

be sure it is cool before refueling.

Don’t leave the engine running while the High

Performance Vac is unattended. Stop engine before

transporting High Performance Vac from one place to

another.

Don’t start or run this High Performance Vac indoors,

or in an improperly ventilated area as poisonous carbon

A. Assembly

1. Attach the collector assembly to the base unit:

• Bolt the collector assembly to the frame with 4 sets of

bolts, washer, and nuts

• Slide the rectangular end of the collector over the housing

and mount the flange with 2 sets of washers and nuts

2. Attach the throttle control cable to the handle on the

collector assembly:

• Bolt throttle control lever to handle with washer and nut

• Secure throttle cable to handle with cable ties in 2 places

3. Install the band clamp into the debris bag (wear gloves

when handling band clamp):

• Slide the bracket end of the band clamp through the left

side opening of the sleeve on the debris bag until it

emerges from the right side

• Feed the tail end of the band (on the clasp side) behind

the bracket in the sleeve

• Pinch the wire form on the clasp together and connect it

through 2 holes in the adjustment bracket such that it will

close tightly over the collector

4. Connect the debris bag by placing it over the bottom lip of

the collector and closing the clasp to secure the bag. Adjust

the clasp wire form to the appropriate hole position on the

bracket to insure a tight fit. If the bag will not fit tight within

the range of the 3 adjustment holes, insert the bag seal strap:

• Unhook the wire form from the bracket

• Pull the tail end of the

band back out from

behind the bracket

• Feed one end of the seal

strap behind the metal

band and through the

channel to the other side

• Tuck the other end of

the seal strap behind

the bracket

(overlapping the lead

end of the seal strap)

• Feed the tail end of the

band clamp behind the

bracket (overlap the

seal strap)

• Connect the wire form

to the appropriate holes

in the bracket and

secure the debris bag to

the collector

5. Attach nozzle assembly to

base unit:

• Attach one end of the

hose to the nozzle

assembly with the

bridge clamp

• Slide the other end of

Assembly Instructions

the hose over the edge of the inlet on the front plate

• Hook one side of the nozzle bracket over the front axle

• Bend the other end of the nozzle bracket inward to

hook it over the axle and engage the pins on the wheel

bracket with the slots on the nozzle bracket

• Secure the hose to front plate inlet with the bridge

clamp

• Attach the nozzle cable end fitting through the hole in

the nozzle bracket

6. To remove nozzle assembly (for purposes of storage, or

clearing blockages):

• Turn engine off and disconnect spark plug

• Loosen hose clamp on the front plate with flathead

screwdriver or 5/16 wrench

• Slide hose off of front plate inlet

• Bend one side of nozzle bracket inward and twist the

assembly to remove the hook from the axle

• Twist back and lift to remove the other side of nozzle

bracket from the axle

WARNING DANGER

NEVER RUN OR OPERATE YOUR MACHINE

UNLESS DISCHARGE BAG IS ATTACHED,

AND THE INTAKE NOZZLE IS INSTALLED.

C. Empty Debris Bag

1. Turn off engine and let it come to a complete stop before

removing the debris bag.

2. Roll vacuum to the desired unloading location

(compost pile, curb-side, wooded area, tarp, etc.).

3. Open clasp on band clamp to release bag to the ground.

Avoid dragging bag on surface to prolong bag life.

4. Empty contents of debris bag (handle straps are provided

on the under side of the bag for aid in dumping contents).

5. Reconnect bag to collector.

D. Refueling the Engine

1. Stop engine and allow it to cool for a few minutes before

refueling.

Operation

WARNING DANGER

THE OPERATOR OF THIS HIGH PERFORMANCE

VAC IS RESPONSIBLE FOR ACCIDENTS OR

HAZARDS OCCURRING TO HIMSELF, OTHER

PEOPLE OR THEIR PROPERTY.

B. Vacuuming

1. Adjust nozzle to desired height by turning the nozzle

control knob, secure position with wing nut.

2. Vacuum debris from lawn or paved surfaces. Vacuum the

following: leaves, small twigs and sticks, acorns, thistles,

seed pods, grass clippings, straw, wood chips, dry mulch,

litter, small cans & bottles, paper products, styrofoam

products.

3. Avoid the following: excessively wet surfaces and debris,

gravel surfaces, large hard objects, rocks, long fibrous

materials (vines, rope, string etc). Do not force anything

into vacuum.

WARNING DANGER

ENGINE EMITS CARBON MONOXIDE. DO NOT

OPERATE OR REFUEL IN ENCLOSED AREA.

A. Start Engine

1. Open fuel valve.

2. Open choke.

3. Set throttle to run.

4. Pull starter rope 1 – 3 times.

5. Allow engine to turn over.

6. Close choke.

7. Set throttle speed to max - Always operate vacuum

at full throttle.

WARNING DANGER

KEEP RECOIL STARTER SCREEN AND ENTIRE

ENGINE CLEAR OF ALL DEBRIS. DO NOT

OPERATE ENGINE WITH AN ACCUMULATION OF

GRASS, DIRT, LEAVES OR OTHER

COMBUSTIBLE MATERIAL NEAR MUFFLER.

WARNING DANGER

DO NOT OPERATE UNIT IF EXCESSIVE

VIBRATION OCCURS; SHUT ENGINE OFF

IMMEDIATELY! REMOVE SPARK PLUG WIRES

AND CHECK FOR DAMAGED IMPELLER,

LOOSE IMPELLER BOLT, LOOSE IMPELLER KEY,

OR LODGED FOREIGN OBJECTS.

B. Put Oil and Gasoline in Engine

Before Starting

1. Little Wonder recommends using SAE 30 Oil. The use of

multi-viscosity oil will result in high oil consumption and

possible engine damage.

2. Add gasoline to the fuel tank, and you are ready to start.

3. See Engine Operating & Maintenance instructions for

more detail description of type and amount of oil and

gasoline used.

C. Use of Lifting Lug

Little Wonder High Performance Vac is supplied with convenient

Lifting Lug that can be used when you need to move the unit.

This Lug can hold weight up to a total of 250 lbs.

WARNING DANGER

HANDLE FUEL WITH CARE. IT IS HIGHLY

FLAMMABLE. FUELING A HOT ENGINE OR NEAR

AN IGNITION SOURCE CAN CAUSE A FIRE AND

RESULT IN SERIOUS PERSONAL INJURY AND/ OR

PROPERTY DAMAGE.

WARNING DANGER

DO NOT USE OR SERVICE THE UNIT WHEN IT’S

SUSPENDED FROM THE LIFTING LUG.

WARNING DANGER

FUEL IS EXTREMELY FLAMMABLE. HANDLE IT

WITH CARE. KEEP AWAY FROM IGNITION

SOURCES. DO NOT SMOKE WHILE FUELING

YOUR EQUIPMENT.

A. Storage

1. After each use, run HPV with the empty bag attached to help clear out any loose material in the housing.

2. When not in use store High Performance Vac in sheltered area (a dry place) not accessible to children. Keep throttle in the

“Stop” position.

3. The High Performance Vac, as well as fuel, should not be stored in a house or poorly ventilated areas.

4. Do not store fuel in the engine’s gas tank longer then

30 days.

Storage and Maintenance

After First

8 Hrs of Use

✔

Every

Use

✔

Every

5 Hrs

✔

Every

25 Hours

✔

Every

50 Hours

✔

B. Maintenance

Area

*Engine

Check muffler area for

accumulation of debris

Check for excessive vibration

Inspect for loose or damaged parts

Inspect for clean intake nozzle

Inspect labels condition

Check oil level

**Oil change

Service air cleaner

Clean and inspect spark plus

arrester

See Engine Manual

* See Engine Operating & Maintenance instructions for more detail maintenance and service schedule

** Change oil every 25 Hrs if operating under heavy load or high ambient temperature

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Little Wonder Gartenstaubsauger Handbücher

Little Wonder

Little Wonder 5621 Bedienungsanleitung

Beliebte Gartenstaubsauger Handbücher anderer Marken

White

White 30 series Bedienungsanleitung

MTD

MTD 249-670A Bedienungsanleitung

Craftsman

Craftsman 247.770990 Bedienungsanleitung

Snapper

Snapper Giant-Vac SV25500HV Bedienungs- und Wartungshandbuch

MTD

MTD 242-660-000 Bedienungsanleitung

Black & Decker

Black & Decker LSWV36 Bedienungsanleitung

Flymo

Flymo Garden Vac Bedienungsanleitung

Makita

Makita LXCV01 Bedienungsanleitung

Craftsman

Craftsman 247.77010 Bedienungsanleitung

Troy-Bilt

Troy-Bilt 24A-070F768 Bedienungsanleitung

MTD

MTD 243-670 Bedienungsanleitung

Craftsman

Craftsman 247.77013.0 Bedienungsanleitung

Snapper

Snapper 1690990 Stücklistenhandbuch

Craftsman

Craftsman 247.770110 Bedienungsanleitung

MTD

MTD 241-660-000 Bedienungsanleitung

White Outdoor

White Outdoor Yard Boss 950 Bedienungsanleitung

Craftsman

Craftsman 247.770330 Bedienungsanleitung

MTD

MTD CSV 020 Bedienungsanleitung