Littlebits BUBBLE BOT Bedienungsanleitung

BUBBLE

BOT

MAGNET MAGIC!

Bits snap together with magnets. The magnets are

always right – you can’t snap them together the

wrong way.

ARROWS SHOULD POINT IN THE SAME DIRECTION

IF THE BITS WON’T SNAP TOGETHER, TRY SPINNING

ONE AROUND AND MAKE SURE THE ARROWS POINT

IN THE SAME DIRECTION

ORDER IS IMPORTANT

POWER BITS always come rst and INPUT BITS

only aect the OUTPUT BITS that come after them.

THE INPUT BIT AFFECTS THE OUTPUT

BITS THAT FOLLOW

SOME BITS ARE ADJUSTABLE

Switches, buttons, and dials on the Bit allow

you to change how the Bit functions.

FLIP THE SWITCH TO CHANGE MODES

ADJUST SENSITIVITY WITH

SLIDE POT

BASICS

ANATOMY OF A BITTM

Learn how you can tell top from bottom.

1COLOR-CODED BY FUNCTION

BitsTM are grouped into four dierent categories,

which are color-coded.2

POWER (BLUE)

Power Bits, plus a power

supply, run power through

your circuit.

INPUT (PINK)

Input Bits accept input from

you or the environment and

send signals that aect the

Bits that follow.

OUTPUT (GREEN)

Output Bits do something –

light up, buzz, move…

WIRE (ORANGE)

Wire Bits connect to other

systems and let you build

circuits in new directions.

WITH NO OUTPUT BIT AFTER IT, THE INPUT

BIT HAS NOWHERE TO SEND ITS SIGNAL

TOP BOTTOM

u   flo!

BITSNAP BIT FEET

MEET THE BIT

HOW IT WORKS

p4POWER

Every circuit starts with power. It provides the electricity that

makes your Bits spin, buzz, blink, and shine.

The p4 power Bit converts

the 9 volts of electricity in the

battery to the 5 volts that

littleBits circuits run on.

The power Bit also sends a

signal through your circuit.

Controlling this signal with

inputs is how you control

your circuit.

REAL WORLD ANALOGIES

PHONE CHARGER

o2 LONG LED

p4 POWER

MODE: on/o

on light

low battery light

SAMPLE CIRCUIT

MEET THE BIT

MINI-CHALLENGE

i5 SLIDE DIMMER

Slide this dimmer back and forth to control your circuit.

As you slide it up, more signal goes to the Bits that follow,

brightening lights, speeding up motors, and raising the

volume on your buzzer.

Can you invent something with the slide dimmer that waves

a flag back and forth? How could you change the speed

that it waves?

When the slider is all the

way to the left, it’s sending

an o or 0 volt signal.

When the slider is all the

way to the right, it’s sending

a 5 volt signal. The slider

can be positioned to send

any signal between 0 and

5 volts.

HOUSEHOLD

DIMMER SWITCH STEREO VOLUME CONTROL CAR PEDAL

p4 POWER

i5 SLIDE DIMMER

o2 LONG LED

REAL WORLD ANALOGIES

SAMPLE CIRCUIT HOW IT WORKS

MEET THE BIT

o9 BARGRAPH

The bargraph uses ve LEDs

to turn electricity into light.

Each LED on the board

needs a certain amount of

signal in order to light up. As

you increase the signal sent

to the bargraph, more LEDs

will shine.

MINI-CHALLENGE

Can you invent a way to show your mood to a friend?

REAL WORLD ANALOGIES

SAMPLE CIRCUIT HOW IT WORKS

The bargraph shows you how much signal the Bit is

receiving with a display of ve light-emitting diodes (LEDs)

in dierent colors. Try it with a dimmer to make your own

adjustable lamp.

MUSIC VISUALIZER TV VOLUME

i5 SLIDE DIMMER

o9 BARGRAPH

p1 POWER

PHONE SCREEN

BRIGHTNESS

MEET THE BIT

o13 FAN

Use the fan to create a gentle breeze, perfect for cooling

things o. You can also try taping small things (like stickers

or pieces of paper) to the center of the fan for some

spinning visuals.

Inside the fan is a tiny motor.

When it receives a signal,

it spins. The more signal it

receives, the faster it spins.

LEAF BLOW

PERSONAL FAN AIRPLANE PROPELLER

p4 POWER

i3 BUTTON

o13 FAN

Feet for attaching to mounting

boards or shoes

MINI-CHALLENGE

Can you invent something that uses the fan to move an

object across the table?

REAL WORLD ANALOGIES

SAMPLE CIRCUIT HOW IT WORKS

PRESS DOWN ON

BITSNAPS NOT

WHITE CIRCUIT

BOARD.

Use the included #6 screws in any

of the holes to permanently attach

to any surface.

a26 MOUNTING BOARD

MEET THE ACCESSORY

HOW IT WORKS

The mounting board is like

the backbone of some of

your inventions. It allows

you to keep your circuit

intact and move it around

with ease! It also provides

structure, which is helpful

for building out inventions

like a vehicle.

Snap together your littleBits

circuit and press the feet of

your Bits into the holes of the

mounting board.

NOTE: Your circuit must be

complete before you press

it onto the board. You won't

be able to add Bits one at

a time.

SAMPLE CIRCUIT

i3 BUTTON

p1 POWER

o9 BARGRAPH

o13 FAN

BUILD YOUR CIRCUIT.

PRESS YOUR CIRCUIT ONTO THE MOUNTING BOARD. ATTACH THE BATTERY TO THE MOUNTING BOARD NEXT TO THE

SLIDE DIMMER BIT.

2 3

USE GLUE

DOTS

PRESS THE FAN ONTO THE MOUNTING BOARD. TURN POWER ON AND TEST YOUR CIRCUIT. When you slide the

dimmer, the bargraph should light up and the fan should spin.

4 5

TEST YOUR

CIRCUIT

POWER:

Inhaltsverzeichnis

Andere Littlebits Mikrocontroller Handbücher

Littlebits

Littlebits Arduino Coding Kit Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung