LIVARNO LUX 91158 Technische Daten

IAN 91158

CEILING LIGHT

DECKENLEUCHTE

Montage-, Bedienungs- und Sicherheitshinweise

CEILING LIGHT

Assembly, operating and safety instructions

STROPNÍ SVÍTIDLO

Pokyny k montáži, obsluze a bezpečnostní pokyny

STROPNÉ SVIETIDLO

Pokyny pre montáž, obsluhu a bezpečnostné pokyny

MENNYEZETI LÁMPA

Szerelési, használati és biztonsági tudnivalók

GB Assembly, operating and safety instructions Page 5

HU Szerelési, használati és biztonsági tudnivalók Oldal 11

CZ Pokyny k montáži, obsluze a bezpečnostní pokyny Strana 17

SK Pokyny pre montáž, obsluhu a bezpečnostné pokyny Strana 23

DE/AT/CH Montage-, Bedienungs- und Sicherheitshinweise Seite 29

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the

device.

Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik

funkcióját.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

OFF

5GB

Table of Contents

Introduction

Intended use........................................................................................................................................Page 6

Scope of delivery................................................................................................................................Page 6

Parts description..................................................................................................................................Page 6

Technical Data ....................................................................................................................................Page 6

Safety

Safety information...............................................................................................................................Page 6

Preparation

Required tools and material ...............................................................................................................Page 7

Prior to installation.................................................................................................................Page 7

Start-up

Mounting the light...............................................................................................................................Page 8

Replacing lamps..................................................................................................................................Page 8

Maintenance and Cleaning..............................................................................................Page 8

Disposal............................................................................................................................................Page 8

Warranty and Service

Warranty Declaration.........................................................................................................................Page 9

Service address...................................................................................................................................Page 9

Declaration of conformity...................................................................................................................Page 9

Manufacturer.......................................................................................................................................Page 9

6 GB

Safety/Preparation/Prior to installationIntroduction/Safety

Ceiling light

Introduction

Congratulations on your new product.

You have selected a high quality product.

Please be sure to carefully read the com-

plete operating instructions. Fold out the page with

the illustrations. These instructions are part of the

product and contain important information on setup

and handling. Always follow all safety instructions.

Before using this product for the ﬁrst time verify the

correct voltage and that all parts are properly installed.

Should you have any questions or you are unsure

about operating the product, please contact the

dealer or service centre. Please keep these instructions

in a safe place and pass them on third parties as

applicable.

Intended use

This light is only suitable for indoor use, in dry and

enclosed rooms. The light is only intended for ceiling

mounting. This product is intended for private

household use only.

Scope of delivery

Check immediately after unpacking that the parts

are complete and that the product is in proper

condition.

1 Ceiling light, model 3261-016L, 3263-016L,

3264-016L or 3265-016L

1 Glass shade

2 Rawlplugs

2 Screws

2 Fibre glass hoses

1 Installation instructions

Parts description

1Lamp glass

2Screw

3Glass panel holder

4Connection housing

5Socket

6Mains connection lead

7Rawlplug

8Fibre glass hose

9Bulb

Technical Data

Operating voltage: 230V∼ 50Hz

Lamps: E27, max. 40W

Rated power max.: 1 x E27, max. 40W

Protection class : I/

Protection class: IP20 (only suitable for

indoor use)

Safety

Safety information

Damage due to failure to comply with these operating

instructions will invalidate the guarantee! We assume

no liability for consequential damage! We assume

no liability for material damage or personal injury

due to improper handling or failure to comply with

the safety instructions!

Avoid the risk of fatal injury

from electric shock

Ensure that a qualiﬁed electrician, or a person

trained to carry out electrical installations, per-

forms the electrical installation.

Always check the light, power supply, and mains

cable for damage before plugging it in. Never

use the light if it shows any signs of damage.

CAUTION! A damaged mains cable indicates

a life-threatening danger due to electric shock.

7GB

Safety/Preparation/Prior to installation

In the event of damage, repairs or other prob-

lems with the light please contact the service

centre or a qualiﬁed electrician.

Prior to installation, remove the fuse or switch

oﬀ the circuit breaker (0 setting) in the fuse box.

Prior to installation, verify that the mains voltage

on site corresponds with the operating voltage

required for the light (230V∼).

Ensure that the light does not come into contact

with water or other liquids under any circum-

stances.

Never open any of the components of the elec-

trical equipment or insert any objects into the

same components. This will pose a risk of fatal

injury from electric shock.

Do not install the light on a wet or conductive

substrate!

Prevent fire and

injury hazards

RISK OF INJURY! Check each lamp and

lamp glass for damage immediately after un-

packing. Do not mount the light with defective

lamps and/or glass shade. In this case contact

the service centre for a replacement.

RISK OF BURNS! Ensure that the light has

been switched oﬀ and has cooled before touch-

ing it, to avoid burn injuries. Lamps develop a

lot of heat in the area of the lamp head.

Allow the light to cool completely.

Replace defective bulbs with new ones immedi-

ately. Before changing bulbs, always ﬁrst remove

the fuse or switch oﬀ the circuit breaker.

Do not leave the light or packaging material ly-

ing unattended. Plastic ﬁlm or bags, Styrofoam

etc. can turn into dangerous toys for children.

Safe working

Only use 220–240V∼ lamps with a E27 socket

and a maximum output of 40 Watt.

Mount the light so that it is protected from

moisture and dirt.

Carefully prepare the installation and allow

suﬃcient time. Organise all parts and any

necessary additional tools or materials before

starting so they are easy to reach.

Always be attentive when working! Always pay

attention to what you are doing and act with

common sense. Never install the light if you are

having diﬃculty concentrating or do not feel

well.

Preparation

Required tools and material

The tools and materials speciﬁed are not included.

This information and these values are non-binding

and are only provided as a reference. The nature

of the material is determined by the individual local

conditions.

- Pencil/making tool

- Voltage tester

- Screwdriver

- Electric drill

- Drill bit

- Side cutting pliers

- Ladder

Prior to installation

Important: The electrical connection must be

established by a qualiﬁed electrician or a person

trained to perform electrical installations.

This person must be familiar with the properties of

the light and the connection regulations.

Familiarise yourself with all the instructions and

diagrams in this manual, as well as with the

light itself, before you install it.

Before installation ensure that the circuit, to which

the light will be connected, is not energised. To

do so, remove the fuse or switch oﬀ the circuit

breaker in the fuse box (0 position).

Use the voltage tester to verify the de-energised

status.

Introduction/Safety

8 GB

Disposal/Warranty and ServiceStart-up/Maintenance and Cleaning/Disposal

Start-up

Mounting the light

Carefully turn the glass brackets 3outward.

Carefully remove the glass shade 1.

Hold the connection housing 4against the

ceiling and mark the drill holes using the holes

in the connection housing 4intended for the

screws 2.

Drill the holes. Ensure that you do not damage

the supply line.

Insert the rawlplugs 7in the drilled holes.

If necessary, use a hammer to do so.

Mount the light to the ceiling with screws 2.

Slide the ﬁbre glass hoses 8over the power

lead (external).

Connect the power lead to the socket 5.

Note: Ensure that each wire of the mains con-

nection cable (external) is properly connected

in the correct place: live wire, black or brown =

symbol L, neutral wire, blue = symbol N, pro-

tective earth wire, green-yellow = symbol .

Use a clean, lint-free cloth to insert a lamp 9.

Screw the lamp 9(E27 max. 40W) clockwise

into the socket 5.

Secure the glass shade 1with the shade

brackets 3.

Insert the glass shade 1in the glass brackets

3, sliding them slightly outward, and secure

the glass shade 1.

Your light is now ready to use.

Replacing lamps

CAUTION! RISK OF ELECTRIC SHOCK!

To replace the bulb, ﬁrst disconnect the light from

the mains circuit. To do so, remove the fuse or switch

oﬀ the circuit breaker in the fuse box (0 position).

CAUTION! Allow the light to cool completely. Only

replace the lamp after it has completely cooled oﬀ.

Note: use a clean, lint-free cloth when to replace

a lamp.

Turn the glass brackets 3on the connecting

housing 4sides outward.

Carefully remove the glass shade 1.

Turn the defective bulb 9carefully anticlock-

wise out of the bulb socket 5.

Screw a new lamp 9clockwise into the socket

5. Check for correct seating.

Secure the glass shade 1with the glass

bracket 3.

Slide the glass shade 1into the glass bracket

3, sliding these slightly outward, and secure

the glass shade.

Note: only use 220–240V∼ lamps with max.

40Watt and E27-Sockel.

Maintenance and Cleaning

CAUTION! RISK OF ELECTRIC SHOCK!

Disconnect the light from the mains circuit before

cleaning. To do so, remove the fuse or switch oﬀ

the circuit breaker in the fuse box (0 position).

Do not use solvents, benzene or similar substances

They could damage the light.

Allow the light to cool completely.

CAUTION! RISK OF ELECTRIC SHOCK!

For electrical safety, never clean the light with

water or other ﬂuids, or immerse it in water.

Only use a dry, lint-free cloth for cleaning.

Disposal

The package and packaging materials

consist entirely of environmentally

friendly materials. They can be disposed

of at your local recycling facility.

The symbol of the wheelie bin with the

line through it means that, in the European

Union, the product has to be disposed

of in a separate refuse collection. This applies to the

product and to all components bearing this symbol.

Do not dispose of products bearing this symbol in

your normal household waste, but instead they must

be taken for recycling to a collection site for electrical

9GB

Disposal/Warranty and Service

and electronic appliances. Recycling helps to reduce

the consumption of raw materials and protects the

environment.

Warranty and Service

Warranty Declaration

This product has a 3 year guarantee from the date

of purchase extended only to the original buyer, not

transferable. Please keep your receipt as proof of

purchase. The guarantee applies to material or

manufacturing defects only. It does not cover wear

items or damage caused by improper use. Any

modiﬁcations will void the guarantee. This warranty

does not limit your legal rights.

Please phone the service centre for guarantee claims.

This is the only way to return your product free of

charge.

Service address

Briloner Leuchten GmbH

Im Kissen 2, 59929 Brilon, Germany

Tel.: +49 (0) 29 61/97 12–0

Fax: +49 (0) 29 61/97 12–199

E-mail: Info@briloner.de

www.briloner.de

IAN 91158

For all inquiries about your product, please have

your receipt and the article number (e.g. IAN 12345)

ready as your proof of purchase.

Declaration of conformity

This product fulﬁls the requirements of the applicable

European and national directives (Electromagnetic

Compatibility 2004/108/EC, Low Voltage

Directive 2006/95/EC, Ecodesign Directive

2009/125/EC, RoHS Directive 2011/65/EU).

Conformity has been demonstrated. The relevant

declarations and documents are held by the

manufacturer.

Manufacturer

Briloner Leuchten GmbH

Im Kissen 2

59929 Brilon

Germany

Start-up/Maintenance and Cleaning/Disposal

Tartalomjegyzék

11HU

Bevezető

Rendeltetésszerű használat...............................................................................................................Oldal 12

A csomagolás tartalma......................................................................................................................Oldal 12

Alkatrészleírás....................................................................................................................................Oldal 12

Műszaki adatok .................................................................................................................................Oldal 12

Biztonság

Biztonsági tudnivalók.........................................................................................................................Oldal 12

Előkészítés

Szükséges szerszámok és anyagok .................................................................................................Oldal 13

A felszerelés előtt....................................................................................................................Oldal 13

Üzembe helyezés

A lámpa szerelése .............................................................................................................................Oldal 14

Az izzó cseréje...................................................................................................................................Oldal 14

Karbantartás és tisztítás...................................................................................................Oldal 14

Ártalmatlanítás.........................................................................................................................Oldal 15

Garancia és szerviz

Garancianyilatkozat..........................................................................................................................Oldal 15

Szerviz címe .......................................................................................................................................Oldal 15

Megfelelőségi nyilatkozat.................................................................................................................Oldal 15

Gyártó ................................................................................................................................................Oldal 15

Tartalomjegyzék

Inhaltsverzeichnis

Sprachen:

Andere LIVARNO LUX Beleuchtungsausrüstung Handbücher

LIVARNO LUX

LIVARNO LUX 282449 Technische Daten

LIVARNO LUX

LIVARNO LUX 276248 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 14129705L Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX HG00302 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 285632 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX CORDLESS WORK LIGHT Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 300257 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 345123 2004 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX LLPL 27 B1 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 14102104L Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 970-K Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 288704 Technische Daten

LIVARNO LUX

LIVARNO LUX 292040 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 282386 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 970-G Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 91748 Montage- und Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 292091 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 970-M Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX KH 4245 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 277907 Technische Daten

LIVARNO LUX

LIVARNO LUX 970-G Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 277993 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 292057 Bedienungsanleitung

LIVARNO LUX

LIVARNO LUX 14120005L Technische Daten

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung