LiveSpark FirePixel Bedienungsanleitung
LiveSpark FirePixel & Controller
Installation & Troubleshooting Guide v5.0 - 2018
Table&of&Contents&
Safety Information 2
Introduction 3
System Components 4!
Description of Components 6!
System Diagram 8
Fuel Requirements 9
Operating Pressure 9!
Fuel Consumption 10
Hardware Setup Instructions 10!
FirePixel Operation 14!
LiveSpark Controller Feature Summary 16!
DMX Control 16!
MIDI Control 17!
Ethernet Control via Ableton Live 17!
Stage3D Setup Instructions 19!
Frequently Asked Questions 25!
Troubleshooting 29
Plumbing Diagram 31
!
!1
Important&Safety&Information&
The$FirePixel$+lame$effect$is$designed$for$operation$by$experienced$special$effect$professionals$
only.$$It$is$required$that$installers$and$operators$follow$all$local$codes,$laws$and$regulations$and$
consult$with$relevant$local$authorities$having$jurisdiction$before$use$in$any$private$or$public$
environment.$$Possible$codes$and$standards$that$may$apply$in$your$jurisdiction$of$use$include$
NFPA$160,$“Standard$for$Flame$Effects$Before$an$Audience,”$NFPA$58,$“Liqui+ied$Petroleum$Gas$
Code,”$or$others.$$$
Prior$to$installation$or$use,$carefully$consult$the$LiveSpark$Flame$Effect$and$Operation$Document$
for$details$that$will$aid$in$obtaining$operating$permits$in$your$area.$
!
!2
LiveSpark FirePixel & Controller
Installation & Troubleshooting Guide v5.0 - 2018
Introduction&
Congratulations on purchasing your new LiveSpark flame effect system. This guide will introduce you to its
safe operation, the FirePixel’s and AfterBurner’s unique features, and provide pointers on how you can get
the most out of your system for your installations, stage shows, and other productions.
Together, the FirePixel, AfterBurner and LiveSpark Controller offer a flame effect system unlike any other,
delivering visualization capabilities in fire previously only found in the world of lighting. FirePixels produce a
highly luminous, smoke-free, soot-free, wind-resistant flame that can be integrated, synchronized, and
digitally controlled into any theatrical performance.
The FirePixel offers precision-level control over flame height: ranging from a one-inch candle up to a 4 foot
flame. The AfterBurner extends the FirePixel’s flame height capabilities up to 12 feet. The FirePixel and
Controller are compliant with NFPA 160 and have been permitted for use in many jurisdictions and
circumstances. The system offers an array of features to ensure performer and audience safety, including
relight, flame sensing, water and obstruction detection, auto-calibration, a physical shutoff/ignition key, and
three layers of emergency stop protection.
!
!3
!
System&Components&
The following items are not included with LiveSpark systems but may be necessary for your
applications.
-Propane gas canisters
-DMX / MIDI cables
-Lighting controller
-MIDI controller
-Computer
Component
Purpose
FirePixel
Variable height flame effect
AfterBurner
Flame effect accessory that boosts FirePixel’s flame output
Controller
Powers and controls flame effect devices
Cable
Delivers power and data to FirePixels, AfterBurners & Controller
Regulator
Regulates propane fuel to usable pressure
Fuel Hose
LPG-rated hose that conducts propane vapor from source to destination
Accumulator
Propane fuel tank that supplies high peak vapor flow rates
FirePixel Clamp
Attaches FirePixel to U-bracket and supports up to two AfterBurners
Power Supply
Powers longer chains of devices where additional power is needed
!
!4
LiveSpark FirePixel & Controller
Installation & Troubleshooting Guide v5.0 - 2018
Photos&of&typical&equipment&included&in&a&
LiveSpark&system&
!!
LiveSpark Controller
!
!
LiveSpark Cable
!
!5
Description&of&Components&
1. FirePixel Flame Effect: Propane-fueled, self-igniting, auto-calibrating flame effects that produce a
highly luminous, virtually smoke-free, soot-free and wind resistant flame. The FirePixel’s low
latency flame reactivity and variable flame height can deliver a wide range of visual effects.
The FirePixel is a specialized flame effect that receives data from the LiveSpark Controller and
creates a single column of flame, up to 4 feet in height. Up to twenty-five LiveSpark FirePixels can
be daisy-chained together (up to 127 with external power), from the Controller via the LiveSpark
Cable, to create a visualization performance.
Fuel is supplied from any propane gas canister (not included) with a compatible “disposable
propane adapter”, through Propane Fuel Regulators, and is ignited when signaled. It is also
possible to fuel FirePixels via a hose and manifold system. The FirePixel offers several key features
to support special effects applications and performances:
•Fuel Efficiency: The FirePixel burns fuel at an efficient rate with a maximum fuel flow rate
of 15 LPM at full flame height.
•Auto-Calibration: The FirePixel automatically calibrates the height of the flame based on the
wind conditions and relights if it blows out.!
•Rapid Response: The FirePixel responds quickly to commands (eg. ignite, adjust flame
height, extinguish) — within 6 milliseconds.!
!!!
FirePixel
!!
Propane Fuel Regulator
!
!6
LiveSpark FirePixel & Controller
Installation & Troubleshooting Guide v5.0 - 2018
•Monitor & Control: The FirePixel can be controlled and monitored in conjunction with the
LiveSpark Controller and Stage3D iPad app, indicating ignition, water condition, physical
obstruction on the burner, and network connectivity issues.!
2. Stage 3D: A complete visual rendering and monitoring software app that visualizes the expected
behavior of a FirePixel installation. The 3D environment presents a virtual stage to the user,
allowing you to accurately position and identify each FirePixel in your performance system.
The address and real-time status of each FirePixel is displayed in 3D against the backdrop of any
user-created photo. Nominal performance visualization are represented graphically as 3D blocks,
or fire particle system simulation.
Any FirePixel error condition that may occur such as Failure to Ignite, Water Condition,
Obstruction is highlighted graphically and textually on the display as it occurs. Visual error
indication lets you quickly spot which FirePixel is having a problem, so easily identify where to
direct attention.!
3. LiveSpark Controller: The Controller is a 2U 19” rack mount equipment powered by a standard
110VAC connection. FirePixels may be directly powered and controlled by the LiveSpark
Controller.
The LiveSpark Controller also accept inputs from other industry standard performance control
systems such as DMX light boards, midi devices, and music production software such as Ableton
Live.
!
The LiveSpark Controller communicates with and receives status from each FirePixel via a
dedicated bi-directional command protocol. To further increase safety, the Controller features four
levels of shutoff including nominal operation off button, data key lock, operator presence control,
and an emergency stop (E-Stop) switch.
The 3-pin DMX port accepts signals from any standard DMX interface such as a light board or
DMX console.
The Midi port accepts signals from any standard Midi interface such as a Midi controller,
keyboard, drum trigger, drum machine, touch pad, wind controller, Midi guitar, etc.
An Ethernet port accepts control commands from any external network broadcaster, such as the
Ableton Live FirePixel plugin provided by LiveSpark. Additional application plugins to extend the
range of authoring environments is planned for future release by LiveSpark and partners.
!
!7
System&Diagram&
!
!8
LiveSpark FirePixel & Controller
Installation & Troubleshooting Guide v5.0 - 2018
Fuel&Requirements&
FirePixels are compatible with propane fuel only. Propane may be delivered to the FirePixel from any UL,
CSA or other certified storage tank. Propane supplied may contain some portion of butane and up to 5%
propylene, per the ASTM’s and GPA’s HD-5 standard. Most US suppliers provide HD-5 propane under the
name “propane,” which is compatible with FirePixels.
FirePixels are not compatible with natural gas, methane, pure butane or any other flammable or non-
flammable fuel. FirePixels are not compatible with any liquid fuel. Using a non-compatible fuel may
damage FirePixels and void their warranty. Propane must be fully vaporized prior to conveyance into the
FirePixel fuel inlet. Do not supply FirePixels from a propane tank designed to distribute propane in liquid
form, such as tanks with bottom- or side-outlet valves. Do not supply additional fuel to the FirePixel flame
output.
Operating&Pressure&
FirePixels are designed to operate with propane fuel regulated to a pressure of 30PSI +/- 3PSI at the fuel
inlet. It is important to use an appropriate regulator that can deliver fuel at the correct operating pressure.
A +/- 3PSI variation of pressure inlet pressure is acceptable.
WARNING! Exceeding regulated fuel supply pressure above 30PSI may cause fuel to leak and damage FirePixel hardware. never
SET REGULATED PRESSURE TO exceed 30PSI.
FirePixels are factory-calibrated to operate at 30PSI. Exceeding this pressure may cause the FirePixels internal valve to leak and
create a dangerous condition. Supplying FirePixels with fuel at pressures below 30PSI is also not recommended. FirePixels
operated at lower pressures may fail to ignite, may not create desirable flame perceptual effects, and may release small amounts
of uncombusted fuel to the atmosphere due to repeated attempts to ignite, though the FirePixel will enter the Locked state if
ignition fails repeatedly (see Stage3D documentation for monitoring errors).
Because propane cools as it expands from its liquid pressure (120PSI at 72F) to its vaporized usage pressure, it is possible for
the output pressure of the propane supply tank to fall below 30PSI. During this condition FirePixels should be extinguished and
!
!9
Andere Handbücher für FirePixel
1
Inhaltsverzeichnis
Andere LiveSpark Brenner Handbücher
