Instruction manual
6
Press the timer button, it lights up, display will show default time “10” and you can adjust time by pressing
“+” or “-“, with “+” you can adjust by 10 minutes and with “-“you can adjust by one minute (range from 1
to 180min), then you can press timer button to confirm or wait until display stops flashing.
When the time is up, appliance “beep” and stops to change for standby mode automatically.
To cancel this function you can press on/off button to return on standby mode or hold the timer to resume
the selected power or temperature.
Warning: after use, switch off the appliance. Don’t plug it out immediately, there's 1 minute pre-set for
the fan continuous working until the unit cool down. After the cooling fan stops operation, unplug the
appliance from the socket
Child lock function:
To prevent children from changing settings or turning appliance on, you can press '+' and '-' at the same
time, all keys would be locked.
Under 'lock' status, press '+' and '-' at the same time and hold for 3 sec., the setting is unlocked again.
Or you could press 'ON/OFF' key, it would change to standby mode, then you could set needed function
again.
Note: you can use steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with bottom
diameter from 12cm to 26cm.
Do not pull out the power cord during operation.
CL ANING AND STORAG
Before cleaning, unplug and wait for the appliance to cool down.
•Wipe with a moistened cloth.
•Do not clean with any abrasive items or liquids, as this will damage the appliance.
•Do not immerse in water or any other liquid.
