Livoo DOP149 Bedienungsanleitung

Instruction Manual

WWW.LIVOO.FR

Meat grinder

Reference : DOP149

Version : 1.4

Language : English

Instruction Manual

You have purchased a product LIVOO brand and we thank you. We take great care in design, ergonomics

and ease of use of our products. We hope that this product will give you complete satisfaction.

This instruction manual is available too on our website www.livoo.fr

GENERAL SAFETY INSTRUCTIONS

PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE

PARTICULARLY BEFORE THE FIRST USE.

A misuse of the appliance can damage it or hurt the user. Assure that

you use the appliance for the use for which it is designed, we refuse

any responsibilities as for the damages by an incorrect use or a bad

manipulation.

1. Make sure your mains voltage corresponds to that specified

on the appliance before plugging in. The appliance must be

connected to an earthed mains safety socket.

2. To protect against electrical hazards, do not immerse the

cord, plug, or appliance itself in water or other liquids.

3. Never let the machine operate unattended. Keep out of

reach of children or incompetent persons.

4. The appliance is not intended to be operated by means of an

external timer or separate remote control system.

5. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard. (*)

6. Do not use the device:

-if the grip or the power cable is damaged

-in case of malfunction

-if the device was damaged in any way

-if it fell in the water

Instruction Manual

-if you dropped it

7. Never use the appliance near hot surfaces. Never move the

appliance by pulling the cord. Do not wind the cord around

the appliance or twist it.

8. Stand the appliance on a stable, flat surface.

9. Never use accessories which are not recommended by the

producer. They could constitute a danger to the user and risk

to damage the appliance.

10. Care shall be taken when handling the sharp cutting blades,

emptying the bowl and during cleaning.

11. There is potential injury from misuse.

12. It is absolutely necessary to keep this appliance clean at all

times as it comes into direct contact with food.

13. Regarding the instructions for cleaning surfaces in contact

with food or oil, thanks to refer to the below paragraph

"cleaning" in manual.

14. Regarding the instructions for the use of accessories,

operation times and speed settings, thanks to refer to the

below paragraphs.

15. Always disconnect the appliance from the supply if it is left

unattended and before assembling, disassembling or

cleaning.

16. This appliance shall not be used by children. Keep the

appliance and its cord out of reach of children.

17. This appliance can be used by persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction

Instruction Manual

concerning use of the appliance in a safe way and if they

understand the hazards involved.

18. Children shall not play with the appliance.

19. Switch off the appliance and disconnect from supply before

changing accessories or approaching parts that move in use.

20. Accessories, other than those supplied with the appliance,

shall include instructions for their safety use.

21. This appliance is intended to be used in household and

similar applications such as:

Staff kitchen areas in shops, offices and other

working environments

Farm houses

By clients in hotels, motels and other residential type

environments

Bed and breakfast type environments

(*) Competent qualified electrician: after sales department of the producer or importer or any person who

is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case

you should return the appliance to this electrician.

SPECIFICATIONS

Voltage : 220-240V~ 50-60Hz

Power : 500W

Maximum continuous operating time (KB): 15 minutes

3 chopping grids and a stainless steel biscuit disc

1 sausage and kebbes kit (dumplings)

Reverse direction function

Integrated storage with hatch for grilles and accessories

Stores cord underneath the unit

Large carrying handle

Accessory: a push-button

Instruction Manual

DESCRIPTION

ASSEMBLING YOUR APPLIANCE

Check that voltage indicated on the rating label corresponds to the mains voltage in your home.

Wash all parts (except motor housing) in warm soapy water.

1. Hold the head and insert it in

the inlet with one hand,

revolve toward left and insert

it into by pushing down the

locking knob and taking care

to match the slot. Then turn

to the left to lock and release

the locking knob. (fig. 1 and

2).

Instruction Manual

2. Place the feed screw into the

head, long end first, by

turning the feed screw slightly

until it is set into the motor

housing (fig.3).

3. Place the cutting blade onto

the feed screw shaft with the

blade facing the front as

illustrated (fig.4). If it is not

fitted properly, meat will not

be ground.

MINCING MEAT

1. Cut all foods into pieces

(Sinewless, boneless and fatless

meat are recommended), in

approximate size:

20 x 20mm so that they fit easily

into the hopper opening.

2. Plug in and press “ON”switch

button.

3. Feed foods into hopper plate

hole. Use only the food pusher

(fig.7).

4. After use, switch the unit off and

unplug it from the power supply.

4. Place the desired cutting plate

next to the cutting blade, fitting

protrusions in the slots (fig.5).

5. Support or press the center of

the cutting plate with one finger

then screw the fixing ring until

tight with another hand (fig.6).

Do not over tighten.

7. Place the hopper plate on the head and fix into position.

8. Locate the unit on a firm place.

9. The air passage at the bottom and the side of the motor housing should be kept free and not

blocked.

Instruction Manual

REVERSE FUNCTION

1. In case of jamming, switch the appliance off by pressing “OFF” button, then press reverse

switch.

2. Feed screw will be rotating in the opposite direction, and the head will get empty.

3. If it doesn't work, switch the unit off and clean it.

MAKING KEBBE

1. Place kebbe attachments onto

the feed screw shaft together,

fitting protrusions in the slots

(fig.8).

2. Screw fixing ring into place until

tight. Do not over tighten (fig.9 +

fig.10).

3. Form Kebbes as illustrated below and deep fry:

EXAMPLES OF RECIPES

FOR STUFFING

-Mutton 100g

-Olive oil 1 ½ tablespoon

-Onion (cut finely) 1 ½ tablespoon

-Spices to your taste

-Salt to your taste

-Flour 1 ½ tablespoon

1. Mince mutton once or twice.

2. Fry onion until brown and add minced mutton, all spices, salt and flour.

Instruction Manual

MEAT COATING

-Lean meat 450g

-Flour 150-200g

-Spices to your taste

-Nutmeg (finely cut) 1

-Powdered red pepper to your taste

-Pepper to your taste

1. Mince meat three times and mix all ingredients together in a bowl. More meat and less flour create

better consistency and taste.

2. Grind the mixture three times.

3. Disassemble by reversing the assembling steps from 5-3 to remove the cutting plate and cutting

blade.

MAKING SAUSAGE

Before starting, please assemble sausage attachment as per following (fig.11)

1. Never prepare very thick sausages in order to avoid any pressure on casing.

2. Note: soak the casings for around 10-15 minutes in warm water to make them flexible.

3. Connect appliance, switch it on.

4. Push the ingredients into the hopper plate hole and slowly take off the casing from the attachment

tip as it fills.

5. Twist the casing to shape the sausages.

MAKING BISCUIT

Before starting, please assemble biscuit attachment as per previously mentioned instructions.

1. Select the desired form of biscuit and place the mixture on the hopper plate.

2. Connect appliance, switch it on.

3. If necessary, press on the preparation with the pusher. Do not engage fingers.

4. Hold the dough elongated when out and cut to desired length.

Instruction Manual

CLEANING AND STORAGE

1. Make sure that the motor has stopped completely.

2. Disconnect the plug from the power outlet.

3. Disassemble by reversing the steps from 6 to 1 figures.

4. If the fixing ring is not easily removed by hands, please use

tools.

5. To remove the cutting plate easily, place a screwdriver

between the cutting plate and the head as illustrated and lift

it up (fig.12 + 13).

6. Remove food scraps of meat, etc. Wash each part in warm

soapy water.

7. Never immerse the motor housing in water, but only wipe it

with a damp cloth.

8. Do not put accessories into dishwasher.

9. A bleaching solution containing chlorine will discolor

aluminum surfaces.

10. Thinners and petrol will crack or change the color of the unit.

11. Wipe all the cutting parts with a soft cloth and metal parts

with grease or vegetable oil-wet cloth to prevent them from

rusting.

Instruction Manual

Disposal of this product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

The European Directive 2012/19/EU on Waste Facilities Electrical and Electronic (WEEE)

This marking shown on the product or its literature, indicates that it should not be disposed with other

household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other

types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product or their local authority office, for details of

where and how they can take this item for environmentally safe recycling.

Photo no contractual

Worried about the quality of his products the manufacturer reserves the right to make modifications without advance

notice

LIVOO

BP 61071

67452 Mundolsheim - FRANCE

Inhaltsverzeichnis

Andere Livoo Fleischwolf Handbücher

Livoo

Livoo DOP224 Bedienungsanleitung

Beliebte Fleischwolf Handbücher anderer Marken

Klarstein

Klarstein Mett Max Bedienungsanleitung

Grizzly

Grizzly H7778 Bedienungsanleitung

Hobart

Hobart 4822 Bedienungsanleitung

Tasin

Tasin TS-108 Bedienungsanleitung

Adler Europe

Adler Europe AD 48 Bedienungsanleitung

camry

camry CR 4802 Bedienungsanleitung

Bake Max

Bake Max BMMG001 Bedienungsanleitung

Lumme

Lumme LU-MG2113A Bedienungsanleitung

Weston

Weston 35-3201 Bedienungsanleitung

Lumme

Lumme LU-2101 Bedienungsanleitung

GoWISE USA

GoWISE USA GW88012 Bedienungsanleitung

MPM

MPM MMM-07M Bedienungsanleitung

Weston

Weston 82-0101-W Bedienungsanleitung

BIRO

BIRO 3334SS Service-Handbuch

HOFFEN

HOFFEN MG-0440 Bedienungsanleitung

Scarlett

Scarlett SC-MG45M18 Bedienungsanleitung

Adcraft

Adcraft MG-1 Bedienungsanleitung

Johnson

Johnson tomit Bedienungsanleitung